MX51: vision2: Fix build for vision2 board.
PATCH 1/1 MX51: vision2: Fix build for vision2 board.
config.mk should not be used in board directory and should be removed. Use the same approach for building the image as other MX51/MX53 boards.
After this change vision2 board can be built again.
Signed-off-by Fabio Estevam <[email protected]>
--- board/ttcontrol/vision2/config.mk | 25 ------------------------- boards.cfg | 2 +- include/configs/vision2.h | 1 + 3 files changed, 2 insertions(+), 26 deletions(-) delete mode 100644 board/ttcontrol/vision2/config.mk
board/ttcontrol/vision2/config.mk deleted +0 -25
@@ -1,25 +0,0 @@ -# -# Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -CONFIG_SYS_TEXT_BASE = 0x97800000 -IMX_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/imximage_hynix.cfg -ALL += $(obj)u-boot.imx
boards.cfg +1 -1
@@ -124,7 +124,7 @@ ca9x4_ct_vxp arm armv7 vexpress armltd efikamx arm armv7 efikamx - mx5 mx51evk arm armv7 mx51evk freescale mx5 mx51evk:IMX_CONFIG=board/freescale/mx51evk/imximage.cfg mx53evk arm armv7 mx53evk freescale mx5 mx53evk:IMX_CONFIG=board/freescale/mx53evk/imximage.cfg -vision2 arm armv7 vision2 ttcontrol mx5 +vision2 arm armv7 vision2 ttcontrol mx5 vision2:IMX_CONFIG=board/ttcontrol/vision2/imximage_hynix.cfg cm_t35 arm armv7 cm_t35 - omap3 omap3_overo arm armv7 overo - omap3 omap3_pandora arm armv7 pandora - omap3
include/configs/vision2.h +1 -0
@@ -27,6 +27,7 @@#define CONFIG_MX51 /* in a mx51 */ #define CONFIG_L2_OFF +#define CONFIG_SYS_TEXT_BASE 0x97800000#include <asm/arch/imx-regs.h>
Signature · 1 line
1.6.0.4
PATCH 1/1 MX51: vision2: Fix build for vision2 board.
Quoted 6 lines · Fabio Estevam
config.mk should not be used in board directory and should be removed. Use the same approach for building the image as other MX51/MX53 boards.
After this change vision2 board can be built again.
Signed-off-by Fabio Estevam <[email protected]>
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================