Skip to contentSkip to conversation

S5PC2XX: add the sromc header file

PATCH New Minkyu Kang 2 participants 2 messages May 17, 2011 Arm (32-bit)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 S5PC2XX: add the sromc header file

Add missing header file.

---
 arch/arm/include/asm/arch-s5pc2xx/sromc.h |   51 +++++++++++++++++++++++++++++
 1 files changed, 51 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/include/asm/arch-s5pc2xx/sromc.h
arch/arm/include/asm/arch-s5pc2xx/sromc.h new file +51 -0
new file mode 100644
index 0000000..f616bcb
@@ -0,0 +1,51 @@
+/*
+ * (C) Copyright 2010 Samsung Electronics
+ * Naveen Krishna Ch <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Note: This file contains the register description for SROMC
+ *
+ */
+
+#ifndef __ASM_ARCH_SROMC_H_
+#define __ASM_ARCH_SROMC_H_
+
+#define SROMC_DATA16_WIDTH(x)    (1<<((x*4)+0))
+#define SROMC_BYTE_ADDR_MODE(x)  (1<<((x*4)+1))  /* 0-> Half-word base address*/
+						/* 1-> Byte base address*/
+#define SROMC_WAIT_ENABLE(x)     (1<<((x*4)+2))
+#define SROMC_BYTE_ENABLE(x)     (1<<((x*4)+3))
+
+#define SROMC_BC_TACS(x) (x << 28) /* address set-up */
+#define SROMC_BC_TCOS(x) (x << 24) /* chip selection set-up */
+#define SROMC_BC_TACC(x) (x << 16) /* access cycle */
+#define SROMC_BC_TCOH(x) (x << 12) /* chip selection hold */
+#define SROMC_BC_TAH(x)  (x << 8)  /* address holding time */
+#define SROMC_BC_TACP(x) (x << 4)  /* page mode access cycle */
+#define SROMC_BC_PMC(x)  (x << 0)  /* normal(1data)page mode configuration */
+
+#ifndef __ASSEMBLY__
+struct s5p_sromc {
+	unsigned int	bw;
+	unsigned int	bc[4];
+};
+#endif	/* __ASSEMBLY__ */
+
+/* Configure the Band Width and Bank Control Regs for required SROMC Bank */
+void s5p_config_sromc(u32 srom_bank, u32 srom_bw_conf, u32 srom_bc_conf);
+
+#endif /* __ASM_ARCH_SROMC_H_ */
Signature · 1 line
1.7.4.1
#1 lore raw

PATCH 1/1 S5PC2XX: add the sromc header file

Dear Minkyu Kang,

Quoted 1 line · In message <[email protected]> you wrote:

Add missing header file.

This should not be handled separately, but rather be squashed into the patch that now creates the problem, i. e.

04/15 Chander Kashyap [U-Boot] [PATCH] S5P:SROM config code moved to s5p-common directory

             http://article.gmane.org/gmane.comp.boot-loaders.u-boot/97781

Best regards,

Wolfgang Denk

Signature · 7 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
All repairs tend to destroy the structure, to  increase  the  entropy
and  disorder  of the system. Less and less effort is spent on fixing
original design flaws; more and more is spent on fixing flaws  intro-
duced by earlier fixes.       - Fred Brooks, "The Mythical Man Month"