Skip to contentSkip to conversation

block: Fix discard topology stacking and reporting

PATCH Applied Martin K. Petersen 2 participants 2 messages May 18, 2011

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 block: Fix discard topology stacking and reporting

In some cases we would end up stacking discard_zeroes_data incorrectly. Fix this by enabling the feature by default for stacking drivers and clearing it for low-level drivers. Incorporating a device that does not support dzd will then cause the feature to be disabled in the stacking driver.

Also ensure that the maximum discard value does not overflow when exported in sysfs and return 0 in the alignment and dzd fields for devices that don't support discard.

block/blk-settings.c +2 -1
index 1fa7692..42d3bf5 100644
@@ -120,7 +120,7 @@ void blk_set_default_limits(struct queue_limits *lim)
 	lim->discard_granularity = 0;
 	lim->discard_alignment = 0;
 	lim->discard_misaligned = 0;
-	lim->discard_zeroes_data = -1;
+	lim->discard_zeroes_data = 1;
 	lim->logical_block_size = lim->physical_block_size = lim->io_min = 512;
 	lim->bounce_pfn = (unsigned long)(BLK_BOUNCE_ANY >> PAGE_SHIFT);
 	lim->alignment_offset = 0;
@@ -166,6 +166,7 @@ void blk_queue_make_request(struct request_queue *q, make_request_fn *mfn)
 
 	blk_set_default_limits(&q->limits);
 	blk_queue_max_hw_sectors(q, BLK_SAFE_MAX_SECTORS);
+	q->limits.discard_zeroes_data = 0;
 
 	/*
 	 * by default assume old behaviour and bounce for any highmem page
block/blk-sysfs.c +2 -1
index bd23631..d935bd8 100644
@@ -152,7 +152,8 @@ static ssize_t queue_discard_granularity_show(struct request_queue *q, char *pag
 
 static ssize_t queue_discard_max_show(struct request_queue *q, char *page)
 {
-	return queue_var_show(q->limits.max_discard_sectors << 9, page);
+	return sprintf(page, "%llu\n",
+		       (unsigned long long)q->limits.max_discard_sectors << 9);
 }
 
 static ssize_t queue_discard_zeroes_data_show(struct request_queue *q, char *page)
include/linux/blkdev.h +5 -2
index 2ad95fa..1416e3c 100644
@@ -257,7 +257,7 @@ struct queue_limits {
 	unsigned char		misaligned;
 	unsigned char		discard_misaligned;
 	unsigned char		cluster;
-	signed char		discard_zeroes_data;
+	unsigned char		discard_zeroes_data;
 };
 
 struct request_queue
@@ -1066,13 +1066,16 @@ static inline int queue_limit_discard_alignment(struct queue_limits *lim, sector
 {
 	unsigned int alignment = (sector << 9) & (lim->discard_granularity - 1);
 
+	if (!lim->max_discard_sectors)
+		return 0;
+
 	return (lim->discard_granularity + lim->discard_alignment - alignment)
 		& (lim->discard_granularity - 1);
 }
 
 static inline unsigned int queue_discard_zeroes_data(struct request_queue *q)
 {
-	if (q->limits.discard_zeroes_data == 1)
+	if (q->limits.max_discard_sectors && q->limits.discard_zeroes_data == 1)
 		return 1;
 
 	return 0;
Applied
#1 lore raw
Quoted 10 lines · Martin K. Petersen

In some cases we would end up stacking discard_zeroes_data incorrectly. Fix this by enabling the feature by default for stacking drivers and clearing it for low-level drivers. Incorporating a device that does not support dzd will then cause the feature to be disabled in the stacking driver.

Also ensure that the maximum discard value does not overflow when exported in sysfs and return 0 in the alignment and dzd fields for devices that don't support discard.

Applied to for-2.6.40/core

Signature · 1 line
Jens Axboe