Skip to contentSkip to conversation

ASoC: wm1250-ev1: Define "WM1250 Output" with SND_SOC_DAPM_OUTPUT

PATCH Applied Axel Lin 3 participants 3 messages May 26, 2011

Subsystems (3)
Sound ASoC Wolfson microelectronics drivers
lore
Share & tools
lore

Axel Lin

author
#0 lore raw

PATCH 1/1 ASoC: wm1250-ev1: Define "WM1250 Output" with SND_SOC_DAPM_OUTPUT

Codec output pin should be defined with SND_SOC_DAPM_OUTPUT.

Signed-off-by Axel Lin <[email protected]>

---
Note:
Just found this bug while reading the code.
I don't have this hardware handy. I appreciate if someone can test it.

Axel

 sound/soc/codecs/wm1250-ev1.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
sound/soc/codecs/wm1250-ev1.c +1 -1
index 14d0716..bcc2089 100644
@@ -22,7 +22,7 @@ SND_SOC_DAPM_ADC("ADC", "wm1250-ev1 Capture", SND_SOC_NOPM, 0, 0),
 SND_SOC_DAPM_DAC("DAC", "wm1250-ev1 Playback", SND_SOC_NOPM, 0, 0),
 
 SND_SOC_DAPM_INPUT("WM1250 Input"),
-SND_SOC_DAPM_INPUT("WM1250 Output"),
+SND_SOC_DAPM_OUTPUT("WM1250 Output"),
 };
 
 static const struct snd_soc_dapm_route wm1250_ev1_dapm_routes[] = {
Signature · 1 line
1.7.1