oebb.sh oe-core with non-angstrom distro
Hi,
Is it possible to use the http://git.angstrom-distribution.org/cgi-bin/cgit.cgi/setup-scripts/ setup scripts for a non-angstrom distro?
I tried to do this as explained in the following:
git clone git://git.angstrom-distribution.org/setup-scripts
cd setup-scripts
git checkout -b oe-core remotes/origin/oe-core
Now I replace ¨angstrom...¨ with ¨shr¨ in DISTRO= in oebb.sh and run
./oebb.sh config htcleo #I added htcleo machine in the meta-smartphone layer
./oebb.sh bitbake shr-image
This will end up with bitbake trying to use some angstrom scripts and then fail. It would be very nice to make the distro configurable in oebb.sh. I suppose extra configurations for the non-angstrom distro will be needed but I am uncertain how to go about this. Maybe we can add a new branch for SHR specific oebb.sh ?
Best regards
Lukas
Quoting Lukas-David Gorris <[email protected]>:
Quoted 14 lines
Hi,
Is it possible to use the http://git.angstrom-distribution.org/cgi-bin/cgit.cgi/setup-scripts/ setup scripts for a non-angstrom distro?
I tried to do this as explained in the following:
git clone
git://git.angstrom-distribution.org/setup-scripts
cd setup-scripts
git checkout -b oe-core remotes/origin/oe-coreNow I replace ¨angstrom...¨ with ¨shr¨ in DISTRO= in
oebb.shand run./oebb.sh config htcleo #I added htcleo machine in the meta-smartphone layer
Quoted 9 lines
./oebb.sh bitbake shr-image
This will end up with bitbake trying to use some angstrom scripts and then fail. It would be very nice to make the distro configurable in
oebb.sh. I suppose extra configurations for the non-angstrom distro will be needed but I am uncertain how to go about this. Maybe we can add a new branch for SHR specificoebb.sh?Best regards
Lukas
Thanks to Heiner I just found the first problem.The meta-shr layer that provides everything specific to the shr distro must be included for this to work.
Quoting Lukas-David Gorris <[email protected]>:
Quoted 20 lines
Quoting Lukas-David Gorris <[email protected]>:
Quoted 18 lines
Hi,
Is it possible to use the http://git.angstrom-distribution.org/cgi-bin/cgit.cgi/setup-scripts/ setup scripts for a non-angstrom distro?
I tried to do this as explained in the following:
git clone
git://git.angstrom-distribution.org/setup-scripts
cd setup-scripts
git checkout -b oe-core remotes/origin/oe-coreNow I replace ¨angstrom...¨ with ¨shr¨ in DISTRO= in
oebb.shand run./oebb.sh config htcleo #I added htcleo machine in the meta-smartphone layer
./oebb.sh bitbake shr-image
This will end up with bitbake trying to use some angstrom scripts and then fail. It would be very nice to make the distro configurable in
oebb.sh. I suppose extra configurations for the non-angstrom distro will be needed but I am uncertain how to go about this. Maybe we can add a new branch for SHR specificoebb.sh?
Quoted 8 lines
Quoted 5 lines
Best regards
Lukas
Thanks to Heiner I just found the first problem.The meta-shr layer that provides everything specific to the shr distro must be included for this to work.
Patch for git://git.angstrom-distribution.org/setup-scripts,oe-core for use with SHR distro:
conf/local.conf +1 -1
@@ -19,7 +19,7 @@ IMAGE_FSTYPES += "tar.bz2" PARALLEL_MAKE = "-j2" BB_NUMBER_THREADS = "2" -DISTRO = "angstrom-2010.x" +DISTRO = "shr" # Set terminal types by default it expects gnome-terminal # but we chose xterm
oebb.sh +0 -0
@@ -66,7 +66,7 @@ else
#--------------------------------------------------------------------------
# Specify distribution information
#--------------------------------------------------------------------------
- DISTRO="angstrom-2010.x"
+ DISTRO="shr"
DISTRO_DIRNAME=`echo $DISTRO | sed s#[.-]#_#g`
echo "export SCRIPTS_BASE_VERSION=${BASE_VERSION}" > ${OE_ENV_FILE}@@ -253,7 +253,6 @@ BBFILES = ""
# Add your overlay location to BBLAYERS
# Make sure to have a conf/layers.conf in there BBLAYERS = " \\
- \${TOPDIR}/sources/meta-angstrom \\
\${TOPDIR}/sources/meta-openembedded/meta-oe \\
\${TOPDIR}/sources/meta-openembedded/meta-efl \\
\${TOPDIR}/sources/meta-openembedded/meta-gpe \\
@@ -266,6 +265,8 @@ BBLAYERS = " \\
\${TOPDIR}/sources/meta-smartphone/meta-openmoko \\
\${TOPDIR}/sources/meta-smartphone/meta-palm \\
\${TOPDIR}/sources/meta-smartphone/meta-zaurus \\
+ \${TOPDIR}/sources/meta-smartphone/meta-shr \\
+ \${TOPDIR}/sources/meta-smartphone/meta-fso \\
\${TOPDIR}/sources/meta-intel/meta-sugarbay \\
\${TOPDIR}/sources/meta-intel/meta-crownbay \\
\${TOPDIR}/sources/meta-intel/meta-emenlow \\
sources/layers.txt +1 -2
@@ -1,11 +1,10 @@ # Name,repo-uri,branch,rev bitbake,git://git.openembedded.net/bitbake,master,HEAD -meta-angstrom,git://git.angstrom-distribution.org/meta-angstrom,master,HEAD -meta-openembedded,git://git.openembedded.net/meta-openembedded,master,HEAD +meta-openembedded,git://git.openembedded.net/meta-openembedded-contrib,shr,HEAD
meta-texasinstruments,git://git.angstrom-distribution.org/meta-texasinstruments,master,HEAD
meta-efikamx,git://github.com/kraj/meta-efikamx.git,master,HEAD meta-nslu2,git://github.com/kraj/meta-nslu2.git,master,HEAD
meta-smartphone,http://git.shr-project.org/repo/meta-smartphone.git,master,HEAD
meta-intel,git://git.yoctoproject.org/meta-intel,master,HEAD meta-xilinx,git://git.yoctoproject.org/meta-xilinx,master,HEAD
-openembedded-core,https://github.com/openembedded/oe-core.git,master,HEAD +openembedded-core,git://git.openembedded.net/openembedded-core-contrib,shr,HEAD
Quoted 109 lines · Lukas-David Gorris
Quoting Lukas-David Gorris <[email protected]>:
Quoted 29 lines
Quoting Lukas-David Gorris <[email protected]>:
Quoted 27 lines
Hi,
Is it possible to use the
http://git.angstrom-distribution.org/cgi-bin/cgit.cgi/setup-scripts/
setup scripts for a non-angstrom distro?I tried to do this as explained in the following:
git clone
git://git.angstrom-distribution.org/setup-scripts
cd setup-scripts
git checkout -b oe-core remotes/origin/oe-coreNow I replace ¨angstrom...¨ with ¨shr¨ in DISTRO= in
oebb.shand run./oebb.sh config htcleo #I added htcleo machine in the meta-smartphone layer
./oebb.sh bitbake shr-image
This will end up with bitbake trying to use some angstrom scripts and then fail. It would be very nice to make the distro configurable in
oebb.sh. I suppose extra configurations for the non-angstrom distro will be needed but I am uncertain how to go about this. Maybe we can add a new branch for SHR specificoebb.sh?Best regards
Quoted 8 lines
Quoted 3 lines
Lukas
Thanks to Heiner I just found the first problem.The meta-shr layer that provides everything specific to the shr distro must be included for this to work.
Patch for
git://git.angstrom-distribution.org/setup-scripts,oe-corefor use with SHR distro:conf/local.conf +0
-0@@ -19,7 +19,7 @@ IMAGE_FSTYPES += "tar.bz2"
PARALLEL_MAKE= "-j2"BB_NUMBER_THREADS= "2"conf/local.conf +1
-1-DISTRO = "angstrom-2010.x" +DISTRO = "shr"# Set terminal types by default it expects gnome-terminal
# but we chose xtermoebb.sh +1
-1@@ -66,7 +66,7 @@ else #-------------------------------------------------------------------------- # Specify distribution information #-------------------------------------------------------------------------- - DISTRO="angstrom-2010.x" + DISTRO="shr"DISTRO_DIRNAME=
echo $DISTRO | sed s#[.-]#_#gecho "export SCRIPTS_BASE_VERSION=${BASE_VERSION}" > ${OE_ENV_FILE}
oebb.sh +2
-1@@ -253,7 +253,6 @@ BBFILES = "" # Add your overlay location to BBLAYERS # Make sure to have a conf/layers.conf in there BBLAYERS = " \\ - \${TOPDIR}/sources/meta-angstrom \\ \${TOPDIR}/sources/meta-openembedded/meta-oe \\ \${TOPDIR}/sources/meta-openembedded/meta-efl \\ \${TOPDIR}/sources/meta-openembedded/meta-gpe \\@@ -266,6 +265,8 @@ BBLAYERS = " \\ \${TOPDIR}/sources/meta-smartphone/meta-openmoko \\ \${TOPDIR}/sources/meta-smartphone/meta-palm \\ \${TOPDIR}/sources/meta-smartphone/meta-zaurus \\ + \${TOPDIR}/sources/meta-smartphone/meta-shr \\ + \${TOPDIR}/sources/meta-smartphone/meta-fso \\ \${TOPDIR}/sources/meta-intel/meta-sugarbay \\ \${TOPDIR}/sources/meta-intel/meta-crownbay \\ \${TOPDIR}/sources/meta-intel/meta-emenlow \\sources/layers.txt +0
-0@@ -1,11 +1,10 @@ # Name,repo-uri,branch,revbitbake,git://git.openembedded.net/bitbake,master,HEAD
sources/layers.txt +1
-2-meta-angstrom,git://git.angstrom-distribution.org/meta-angstrom,master,HEAD -meta-openembedded,git://git.openembedded.net/meta-openembedded,master,HEAD +meta-openembedded,git://git.openembedded.net/meta-openembedded-contrib,shr,HEADmeta-texasinstruments,git://git.angstrom-distribution.org/meta-texasinstruments,master,HEAD
meta-efikamx,git://github.com/kraj/meta-efikamx.git,master,HEAD meta-nslu2,git://github.com/kraj/meta-nslu2.git,master,HEAD meta-smartphone,http://git.shr-project.org/repo/meta-smartphone.git,master,HEAD
meta-intel,git://git.yoctoproject.org/meta-intel,master,HEAD meta-xilinx,git://git.yoctoproject.org/meta-xilinx,master,HEAD
sources/layers.txt
Quoted 2 lines
sources/layers.txt +1
-1-openembedded-core,https://github.com/openembedded/oe-core.git,master,HEAD +openembedded-core,git://git.openembedded.net/openembedded-core-contrib,shr,HEAD
I guess SHR needs a master projects on similar lines. Using angstrom scripts may not be the correct thing to do. Martin might already have something. But similar to angstrom scripts there is slugos master repository for layer management and configuration.
git://github.com/kraj/slugos-setup.git
I think distro's should have such a repo so they do not have conflict of interest and can do things without pinching others toes.
Quoted 5 lines
_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
Quoted 9 lines · Khem Raj
I guess SHR needs a master projects on similar lines. Using angstrom scripts may not be the correct thing to do. Martin might already have something. But similar to angstrom scripts there is slugos master repository for layer management and configuration.
git://github.com/kraj/slugos-setup.gitI think distro's should have such a repo so they do not have conflict of interest and can do things without pinching others toes.
Yes we have..
http://git.shr-project.org/git/?p=shr-makefile.git;a=summary
with shr-core (shr based on oe-core and other layers) support since 2011-03-02 :). But Lukas doesn't like Makefile for some reason..
Cheers,
Signature · 1 line
Martin 'JaMa' Jansa jabber: [email protected]