mx31ads: Fix environment location on flash
PATCH 1/1 mx31ads: Fix environment location on flash
At the moment u-boot and u-boot environment on flash have overlapping addresses, so each u-boot update erases the environment. Fix this by placing evironment right after u-boot. Also, remove confusing comment about environment location.
Signed-off-by Felix Radensky <[email protected]>
--- include/configs/mx31ads.h | 10 +++------- 1 files changed, 3 insertions(+), 7 deletions(-)
include/configs/mx31ads.h +3 -7
@@ -182,18 +182,14 @@#define CONFIG_SYS_MONITOR_LEN (256 * 1024)/* Reserve 256KiB */ #define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SECT_SIZE (32 * 1024) +#define CONFIG_ENV_SECT_SIZE (128 * 1024)#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE)#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE -/* S29WS256N NOR flash has 4 32KiB small sectors at the beginning and at the end. -* The rest of 32MiB is in 128KiB big sectors. U-Boot occupies the low 4 sectors, -* if we put environment next to it, we will have to occupy 128KiB for it. -* Putting it at the top of flash we use only 32KiB. */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_ENV_SECT_SIZE)/*----------------------------------------------------------------------- * CFI FLASH driver setup
Signature · 1 line
1.7.4.4
PATCH 1/1 mx31ads: Fix environment location on flash
Quoted 10 lines · Felix Radensky
At the moment u-boot and u-boot environment on flash have overlapping addresses, so each u-boot update erases the environment. Fix this by placing evironment right after u-boot. Also, remove confusing comment about environment location.
Signed-off-by Felix Radensky <[email protected]>--- include/configs/mx31ads.h | 10 +++------- 1 files changed, 3 insertions(+), 7 deletions(-)
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================