mx1ads: Fix build by using new relocation scheme
PATCH 1/1 mx1ads: Fix build by using new relocation scheme
Signed-off-by Fabio Estevam <[email protected]>
---
Build tested only. Don't have access to this hardware.
board/mx1ads/config.mk | 25 ------------------------- board/mx1ads/mx1ads.c | 27 +++++++++++++++++++-------- include/configs/mx1ads.h | 10 ++++++++++ 3 files changed, 29 insertions(+), 33 deletions(-) delete mode 100644 board/mx1ads/config.mk
board/mx1ads/config.mk deleted +0 -25
@@ -1,25 +0,0 @@ -# -# board/mx1ads/config.mk -# -# (c) Copyright 2004 -# Techware Information Technology, Inc. -# http://www.techware.com.tw/ -# -# Ming-Len Wu <[email protected]> -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA - -CONFIG_SYS_TEXT_BASE = 0x08400000
board/mx1ads/mx1ads.c +19 -8
@@ -78,7 +78,7 @@ void SetAsynchMode (void)static u32 mc9328sid; -int board_init (void ) +int board_early_init_f (void ) {volatile unsigned int tmp;
@@ -112,10 +112,6 @@ int board_init (void)SetAsynchMode (); - gd->bd->bi_arch_number =MACH_TYPE_MX1ADS ; - - gd->bd->bi_boot_params =0x08000100 ;/* adress of boot parameters */ -icache_enable ();dcache_enable ();
@@ -133,6 +129,15 @@ int board_init (void)return 0 ; } +int board_init (void ) +{ + gd->bd->bi_arch_number =MACH_TYPE_MX1ADS ; + + gd->bd->bi_boot_params =0x08000100 ;/* adress of boot parameters */ + +return 0 ; +} +int board_late_init (void ) {
@@ -161,12 +166,18 @@ int board_late_init (void)return 0 ; } -int dram_init (void ) +int dram_init (void ) +{ +/* dram_init must store complete ramsize in gd->ram_size */ + gd->ram_size =get_ram_size ((volatile void *)PHYS_SDRAM_1 , +PHYS_SDRAM_1_SIZE ); +return 0 ; +} + +void dram_init_banksize (void ) { gd->bd->bi_dram[0 ].start =PHYS_SDRAM_1 ; gd->bd->bi_dram[0 ].size =PHYS_SDRAM_1_SIZE ; - -return 0 ; }#ifdef CONFIG_CMD_NET
include/configs/mx1ads.h +10 -0
@@ -156,6 +156,16 @@#define PHYS_SDRAM_1 0x08000000/* SDRAM on CSD0 */ #define PHYS_SDRAM_1_SIZE 0x04000000/* 64 MB */ +#define CONFIG_SYS_TEXT_BASE 0x10000000 + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_ADDR 0x00300000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x000FFFFF +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_GBL_DATA_OFFSET) +#define CONFIG_SYS_MAX_FLASH_BANKS 1/* 1 bank of SyncFlash */ #define CONFIG_SYS_FLASH_BASE 0x0C000000/* SyncFlash on CSD1 */ #define FLASH_BANK_SIZE 0x01000000/* 16 MB Total */
Signature · 1 line
1.7.1
PATCH 1/1 mx1ads: Fix build by using new relocation scheme
Quoted 10 lines · Fabio Estevam
Signed-off-by Fabio Estevam <[email protected]>---
Build tested only. Don't have access to this hardware.board/mx1ads/config.mk | 25 ------------------------- board/mx1ads/mx1ads.c | 27 +++++++++++++++++++-------- include/configs/mx1ads.h | 10 ++++++++++ 3 files changed, 29 insertions(+), 33 deletions(-) delete mode 100644 board/mx1ads/config.mk
Applied to u-boot-imx (fix), thanks.
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================