vision2: Fix build due to WEIM registers name change
PATCH 1/1 vision2: Fix build due to WEIM registers name change
commit 0015de1a (MX5: Make the weim structure complete) fixed the name for the WEIM registers in order to match with the MX51/MX53 manuals.
Fix the WEIM register for vision2 board so that it can build again.
Signed-off-by Fabio Estevam <[email protected]>
--- board/ttcontrol/vision2/vision2.c | 10 +++++----- 1 files changed, 5 insertions(+), 5 deletions(-)
board/ttcontrol/vision2/vision2.c +5 -5
@@ -169,11 +169,11 @@ static void setup_weim(void) {struct weim *pweim = (struct weim *)WEIM_BASE_ADDR ; - pweim->csgcr1 =0x004100b9 ; - pweim->csgcr2 =0x00000001 ; - pweim->csrcr1 =0x0a018000 ; - pweim->csrcr2 =0 ; - pweim->cswcr1 =0x0704a240 ; + pweim->cs0gcr1 =0x004100b9 ; + pweim->cs0gcr2 =0x00000001 ; + pweim->cs0rcr1 =0x0a018000 ; + pweim->cs0rcr2 =0 ; + pweim->cs0wcr1 =0x0704a240 ; }static void setup_uart (void )
Signature · 1 line
1.7.1
PATCH 1/1 vision2: Fix build due to WEIM registers name change
Quoted 6 lines · Fabio Estevam
commit
0015de1a(MX5: Make the weim structure complete) fixed the name for the WEIM registers in order to match with the MX51/MX53 manuals.Fix the WEIM register for vision2 board so that it can build again.
Signed-off-by Fabio Estevam <[email protected]>
Applied to u-boot-imx (next branch), thanks.
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================