beagleboard: sync with meta-ti linux-omap_2.6.37
From: Darren Hart <[email protected]>
The following commits have been pulled in from the meta-ti linux-omap_2.6.37 recipe, with the exception of:
USB: ehci: remove structure packing from ehci_def
which hails from mainline and should be applied to yocto/base, while the rest should be applied to yocto/standard/beagleboard.
Fixes [YOCTO #764]
Fixes [YOCTO #765]
Fixes [YOCTO #767]
This brings linux-yocto in sync with the meta-ti linux-omap_2.6.37 recipe and significantly improves Beagleboard support in linux-yocto. As there are 115 patches in total, and none of them are new, I have omitted them from the email.
The following changes since commit 9cb5c3fb1634e541cacceeb8c8cabe88afa5b080:
Merge branch 'yocto/standard/base' into yocto/standard/beagleboard (2011-06-06 10:35:20 -0400)
are available in the git repository at:
git://git.yoctoproject.org/linux-yocto-2.6.37-contrib dvhart/yocto/standard/beagleboard
http://git.yoctoproject.org/cgit.cgi/linux-yocto-2.6.37-contrib/log/?h=dvhart/yocto/standard/beagleboard
Alexander Holler (1):
arm: omap3: beagle: Ensure msecure is mux'd to be able to set the RTC
Antti Koskipaa (1):
v4l: v4l2_subdev userspace crop API
Arik Nemtsov (1):
wl12xx: Read MAC address from NVS file on HW startup
Darren Hart (2):
board-omap3beagle: whitespace cleanup
board-omap3beagle: allow for building without wl1271
Eliad Peller (1):
wl1271: set wl->vif only if add_interface succeeded.
Florian Westphal (1):
bridge: stp: ensure mac header is set
Jesper Juhl (1):
ISDN, Gigaset: Fix memory leak in do_disconnect_req()
Juuso Oikarinen (1):
wl12xx: Unset bssid filter, ssid and bssid from firmware on disassoc
Kevin Hilman (1):
OMAP: CPUfreq: ensure policy is fully initialized
Koen Kooi (10):
omap3: beaglexm: fix DVI reset GPIO
omap3: beaglexm: fix power on of DVI
ARM: OMAP: beagleboard: Add infrastructure to do fixups based on
expansionboard name passed by u-boot
ARM: OMAP: beagleboard: pre-export GPIOs to userspace when using a
Tincantools trainerboard
modedb.c: add proper 720p60 mode
ARM: OMAP: add omap_rev_* macros
omap3: beagleboard: add WIP support for beagleboardtoys WL12xx board
beagleboard: hack in support from xM rev C
omap3: allow 1GHz mpurates
BeagleBoard: Adjust USER button pin for xM
Laurent Pinchart (35):
v4l: Share code between video_usercopy and video_ioctl2
v4l: subdev: Don't require core operations
v4l: subdev: Merge v4l2_i2c_new_subdev_cfg and v4l2_i2c_new_subdev
v4l: subdev: Add device node support
v4l: subdev: Uninline the v4l2_subdev_init function
v4l: subdev: Control ioctls support
media: Media device node support
media: Media device
media: Entities, pads and links
media: Entity use count
media: Media device information query
media: Entities, pads and links enumeration
media: Links setup
media: Pipelines and media streams
v4l: Add a media_device pointer to the v4l2_device structure
v4l: Make video_device inherit from media_entity
v4l: Make v4l2_subdev inherit from media_entity
v4l: Move the media/v4l2-mediabus.h header to include/linux
v4l: Replace enums with fixed-sized fields in public structure
v4l: Rename V4L2_MBUS_FMT_GREY8_1X8 to V4L2_MBUS_FMT_Y8_1X8
v4l: Group media bus pixel codes by types and sort them
alphabetically
v4l: subdev: Add a new file operations class
v4l: v4l2_subdev pad-level operations
v4l: v4l2_subdev userspace format API
v4l: v4l2_subdev userspace frame interval API
v4l: subdev: Generic ioctl support
v4l: Add subdev sensor g_skip_frames operation
v4l: Include linux/videodev2.h in media/v4l2-ctrls.h
v4l: Fix a use-before-set in the control framework
v4l: Add 8-bit YUYV on 16-bit bus and SGRBG10 media bus pixel codes
v4l: Add remaining RAW10 patterns w DPCM pixel code variants
v4l: Add missing 12 bits bayer media bus formats
v4l: Add 12 bits bayer pixel formats
omap3: Add function to register omap3isp platform device structure OMAP3 ISP driver
Lennert Buytenhek (1):
ARM: pxa: PXA_ESERIES depends on FB_W100.
Manjunatha Halli (7):
drivers:media:radio: wl128x: FM Driver common header file drivers:media:radio: wl128x: FM Driver V4L2 sources drivers:media:radio: wl128x: FM Driver Common sources drivers:media:radio: wl128x: FM driver RX sources drivers:media:radio: wl128x: FM driver TX sources drivers:media:radio: wl128x: Kconfig & Makefile for wl128x driver drivers:media:radio: Update Kconfig and Makefile for wl128x FM
driver.
Nishanth Menon (2):
omap3|4: opp: make omapx_opp_init non-static
OMAP3: beagle xm: enable upto 1GHz OPP
Pavan Savoy (2):
drivers:misc:ti-st: change protocol parse logic
Bluetooth: btwilink driver
Peter 'p2' De Schrijver (1):
OMAP: CPUfreq: ensure driver initializes after cpufreq framework and
governors
Rabin Vincent (1):
USB: ehci: remove structure packing from ehci_def
Rajendra Nayak (1):
OMAP3 PM: CPUFreq driver for OMAP3
Robert Nelson (2):
omap: Beagle: detect new xM revision B
xM audio fix from Ashok
Sakari Ailus (2):
v4l: subdev: Events support
media: Entity graph traversal
Sanjeev Premi (1):
omap3: Add basic support for 720MHz part
Sergio Aguirre (2):
omap3: Remove unusued ISP CBUFF resource
omap2: Fix camera resources for multiomap
Shahar Levi (3):
wl1271: 11n Support, Add Definitions
wl1271: 11n Support, ACX Commands
wl1271: 11n Support, functionality and configuration ability
Silesh C V (1):
OMAP: PM: CPUFREQ: Fix conditional compilation
Stanimir Varbanov (1):
v4l: Create v4l2 subdev file handle structure
Steve Sakoman (18):
mmc: don't display single block read console messages
MTD: silence ecc errors on mtdblock0
OMAP: DSS2: enable hsclk in dsi_pll_init for OMAP36XX
drivers: net: smsc911x: return ENODEV if device is not found
drivers: input: touchscreen: ads7846: return ENODEV if device is not
found
ASoC: enable audio capture by default for twl4030
MFD: enable madc clock
MFD: add twl4030 madc driver
ARM: OMAP: Add twl4030 madc support to Overo
ARM: OMAP: Add twl4030 madc support to Beagle
OMAP: DSS2: Add support for Samsung LTE430WQ-F0C panel
OMAP: DSS2: Add support for LG Philips LB035Q02 panel
OMAP: DSS2: add bootarg for selecting svideo or composite for tv
output
ARM: OMAP2: mmc-twl4030: move clock input selection prior to vcc test
RTC: add support for backup battery recharge
ARM: OMAP: automatically set musb mode in platform data based on
CONFIG options
OMAP: DSS2: check for both cpu type and revision, rather than just
revision
OMAP: DSS2: Add DSS2 support for Overo
Thara Gopinath (13):
OMAP3: PM: Adding T2 enabling of smartreflex
OMAP: Introduce a user list for each voltage domain instance in the
voltage driver.
OMAP: Introduce API in the OPP layer to find the opp entry
corresponding to a voltage.
OMAP: Introduce API to register a device with a voltagedomain
OMAP: Introduce device specific set rate and get rate in omap_device
structure
OMAP: Voltage layer changes to support DVFS.
OMAP: Introduce dependent voltage domain support.
OMAP: Introduce device scale
OMAP: Disable smartreflex across DVFS
OMAP3: Introduce custom set rate and get rate APIs for scalable
devices
OMAP3: Update cpufreq driver to use the new set_rate API
OMAP3: Introduce voltage domain info in the hwmod structures.
OMAP3: Add voltage dependency table for VDD1.
Thomas Weber (1):
OMAP: Enable Magic SysRq on serial console ttyOx
Tuukka Toivonen (1):
ARM: OMAP3: Update Camera ISP definitions for OMAP3630
Documentation/ABI/testing/sysfs-bus-media | 6 + Documentation/DocBook/Makefile | 5 +- Documentation/DocBook/media-entities.tmpl | 50 + Documentation/DocBook/media.tmpl | 3 + Documentation/DocBook/v4l/dev-subdev.xml | 307 +++ Documentation/DocBook/v4l/media-controller.xml | 89 + Documentation/DocBook/v4l/media-func-close.xml | 59 + Documentation/DocBook/v4l/media-func-ioctl.xml | 116 + Documentation/DocBook/v4l/media-func-open.xml | 94 + .../DocBook/v4l/media-ioc-device-info.xml | 133 ++ .../DocBook/v4l/media-ioc-enum-entities.xml | 308 +++ Documentation/DocBook/v4l/media-ioc-enum-links.xml | 207 ++ Documentation/DocBook/v4l/media-ioc-setup-link.xml | 93 + Documentation/DocBook/v4l/subdev-formats.xml | 2467 ++++++++++++++++++++ Documentation/DocBook/v4l/v4l2.xml | 7 + Documentation/DocBook/v4l/vidioc-streamon.xml | 9 + .../v4l/vidioc-subdev-enum-frame-interval.xml | 146 ++ .../DocBook/v4l/vidioc-subdev-enum-frame-size.xml | 148 ++ .../DocBook/v4l/vidioc-subdev-enum-mbus-code.xml | 113 + Documentation/DocBook/v4l/vidioc-subdev-g-crop.xml | 149 ++ Documentation/DocBook/v4l/vidioc-subdev-g-fmt.xml | 174 ++ .../DocBook/v4l/vidioc-subdev-g-frame-interval.xml | 135 ++ Documentation/media-framework.txt | 353 +++ Documentation/video4linux/v4l2-framework.txt | 129 +- arch/arm/mach-omap2/board-omap3beagle.c | 409 ++++- arch/arm/mach-omap2/board-overo.c | 247 ++- arch/arm/mach-omap2/clock.h | 14 +- arch/arm/mach-omap2/clock34xx.c | 2 + arch/arm/mach-omap2/control.h | 7 + arch/arm/mach-omap2/devices.c | 64 +- arch/arm/mach-omap2/devices.h | 17 + arch/arm/mach-omap2/hsmmc.c | 14 +- arch/arm/mach-omap2/id.c | 10 + arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 3 + arch/arm/mach-omap2/omap_twl.c | 16 + arch/arm/mach-omap2/opp3xxx_data.c | 66 +- arch/arm/mach-omap2/opp4xxx_data.c | 3 +- arch/arm/mach-omap2/pm.c | 110 + arch/arm/mach-omap2/voltage.c | 369 +++- arch/arm/mach-pxa/Kconfig | 1 + arch/arm/plat-omap/clock.c | 2 +- arch/arm/plat-omap/cpu-omap.c | 38 +- arch/arm/plat-omap/include/plat/cpu.h | 57 + arch/arm/plat-omap/include/plat/omap34xx.h | 16 +- arch/arm/plat-omap/include/plat/omap_device.h | 12 +- arch/arm/plat-omap/include/plat/voltage.h | 20 + arch/arm/plat-omap/omap_device.c | 139 ++ block/blk-core.c | 7 +- drivers/base/power/opp.c | 28 + drivers/bluetooth/Kconfig | 10 + drivers/bluetooth/Makefile | 1 + drivers/bluetooth/btwilink.c | 397 ++++ drivers/input/touchscreen/ads7846.c | 13 +- drivers/isdn/gigaset/capi.c | 1 + drivers/media/Kconfig | 22 + drivers/media/Makefile | 10 +- drivers/media/media-device.c | 382 +++ drivers/media/media-devnode.c | 321 +++ drivers/media/media-entity.c | 536 +++++ drivers/media/radio/Kconfig | 3 + drivers/media/radio/Makefile | 1 + drivers/media/radio/radio-si4713.c | 2 +- drivers/media/radio/wl128x/Kconfig | 17 + drivers/media/radio/wl128x/Makefile | 6 + drivers/media/radio/wl128x/fmdrv.h | 244 ++ drivers/media/radio/wl128x/fmdrv_common.c | 1677 +++++++++++++ drivers/media/radio/wl128x/fmdrv_common.h | 402 ++++ drivers/media/radio/wl128x/fmdrv_rx.c | 847 +++++++ drivers/media/radio/wl128x/fmdrv_rx.h | 59 + drivers/media/radio/wl128x/fmdrv_tx.c | 425 ++++ drivers/media/radio/wl128x/fmdrv_tx.h | 37 + drivers/media/radio/wl128x/fmdrv_v4l2.c | 580 +++++ drivers/media/radio/wl128x/fmdrv_v4l2.h | 33 + drivers/media/video/Kconfig | 13 + drivers/media/video/Makefile | 4 +- drivers/media/video/cafe_ccic.c | 11 +- drivers/media/video/davinci/vpfe_capture.c | 2 +- drivers/media/video/davinci/vpif_capture.c | 2 +- drivers/media/video/davinci/vpif_display.c | 2 +- drivers/media/video/isp/Makefile | 13 + drivers/media/video/isp/cfa_coef_table.h | 601 +++++ drivers/media/video/isp/gamma_table.h | 90 + drivers/media/video/isp/isp.c | 2221 ++++++++++++++++++ drivers/media/video/isp/isp.h | 427 ++++ drivers/media/video/isp/ispccdc.c | 2280 ++++++++++++++++++ drivers/media/video/isp/ispccdc.h | 223 ++ drivers/media/video/isp/ispccp2.c | 1189 ++++++++++ drivers/media/video/isp/ispccp2.h | 101 + drivers/media/video/isp/ispcsi2.c | 1332 +++++++++++ drivers/media/video/isp/ispcsi2.h | 169 ++ drivers/media/video/isp/ispcsiphy.c | 247 ++ drivers/media/video/isp/ispcsiphy.h | 74 + drivers/media/video/isp/isph3a.h | 117 + drivers/media/video/isp/isph3a_aewb.c | 374 +++ drivers/media/video/isp/isph3a_af.c | 429 ++++ drivers/media/video/isp/isphist.c | 520 ++++ drivers/media/video/isp/isphist.h | 40 + drivers/media/video/isp/isppreview.c | 2120 +++++++++++++++++ drivers/media/video/isp/isppreview.h | 214 ++ drivers/media/video/isp/ispqueue.c | 1136 +++++++++ drivers/media/video/isp/ispqueue.h | 185 ++ drivers/media/video/isp/ispreg.h | 1589 +++++++++++++ drivers/media/video/isp/ispresizer.c | 1710 ++++++++++++++ drivers/media/video/isp/ispresizer.h | 150 ++ drivers/media/video/isp/ispstat.c | 1100 +++++++++ drivers/media/video/isp/ispstat.h | 169 ++ drivers/media/video/isp/ispvideo.c | 1264 ++++++++++ drivers/media/video/isp/ispvideo.h | 202 ++ drivers/media/video/isp/luma_enhance_table.h | 154 ++ drivers/media/video/isp/noise_filter_table.h | 90 + drivers/media/video/ivtv/ivtv-i2c.c | 11 +- drivers/media/video/mt9m001.c | 2 +- drivers/media/video/mt9v022.c | 4 +- drivers/media/video/ov6650.c | 10 +- drivers/media/video/s5p-fimc/fimc-capture.c | 2 +- drivers/media/video/sh_mobile_csi2.c | 6 +- drivers/media/video/sh_vou.c | 2 +- drivers/media/video/soc_camera.c | 2 +- drivers/media/video/soc_mediabus.c | 2 +- drivers/media/video/v4l2-common.c | 22 +- drivers/media/video/v4l2-ctrls.c | 2 +- drivers/media/video/v4l2-dev.c | 76 +- drivers/media/video/v4l2-device.c | 66 +- drivers/media/video/v4l2-ioctl.c | 216 +-- drivers/media/video/v4l2-subdev.c | 346 +++ drivers/mfd/Kconfig | 21 + drivers/mfd/Makefile | 1 + drivers/mfd/twl-core.c | 8 + drivers/mfd/twl4030-madc.c | 537 +++++ drivers/misc/ti-st/st_core.c | 355 +-- drivers/misc/ti-st/st_kim.c | 56 +- drivers/mmc/card/block.c | 4 +- drivers/mtd/nand/nand_ecc.c | 2 +- drivers/net/smsc911x.c | 4 +- drivers/net/wireless/wl12xx/Kconfig | 10 + drivers/net/wireless/wl12xx/wl1271.h | 11 +- drivers/net/wireless/wl12xx/wl1271_acx.c | 83 + drivers/net/wireless/wl12xx/wl1271_acx.h | 86 + drivers/net/wireless/wl12xx/wl1271_main.c | 161 +- drivers/net/wireless/wl12xx/wl1271_rx.c | 6 + drivers/net/wireless/wl12xx/wl1271_tx.c | 11 + drivers/rtc/rtc-twl.c | 25 + drivers/serial/omap-serial.c | 4 + drivers/video/modedb.c | 4 + drivers/video/omap2/displays/Kconfig | 12 + drivers/video/omap2/displays/Makefile | 2 + .../omap2/displays/panel-lgphilips-lb035q02.c | 244 ++ .../omap2/displays/panel-samsung-lte430wq-f0c.c | 154 ++ drivers/video/omap2/dss/dispc.c | 4 +- drivers/video/omap2/dss/dpi.c | 7 +- drivers/video/omap2/dss/venc.c | 22 + drivers/video/omap2/omapfb/omapfb-main.c | 10 +- fs/buffer.c | 3 +- include/linux/Kbuild | 4 + include/linux/i2c/twl.h | 1 + include/linux/i2c/twl4030-madc.h | 130 + include/linux/media.h | 132 ++ include/linux/omap3isp.h | 631 +++++ include/linux/opp.h | 8 + include/linux/ti_wilink_st.h | 40 +- include/linux/usb/ehci_def.h | 6 +- include/linux/v4l2-mediabus.h | 108 + include/linux/v4l2-subdev.h | 141 ++ include/linux/videodev2.h | 4 + include/media/media-device.h | 95 + include/media/media-devnode.h | 97 + include/media/media-entity.h | 147 ++ include/media/soc_mediabus.h | 3 +- include/media/v4l2-common.h | 18 +- include/media/v4l2-ctrls.h | 1 + include/media/v4l2-dev.h | 25 +- include/media/v4l2-device.h | 4 + include/media/v4l2-ioctl.h | 3 + include/media/v4l2-mediabus.h | 61 +- include/media/v4l2-subdev.h | 120 +- net/bridge/br_stp_bpdu.c | 2 + sound/soc/codecs/twl4030.c | 4 +- sound/soc/omap/omap-mcbsp.c | 3 + 178 files changed, 37220 insertions(+), 745 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-media create mode 100644 Documentation/DocBook/v4l/dev-subdev.xml create mode 100644 Documentation/DocBook/v4l/media-controller.xml create mode 100644 Documentation/DocBook/v4l/media-func-close.xml create mode 100644 Documentation/DocBook/v4l/media-func-ioctl.xml create mode 100644 Documentation/DocBook/v4l/media-func-open.xml create mode 100644 Documentation/DocBook/v4l/media-ioc-device-info.xml create mode 100644 Documentation/DocBook/v4l/media-ioc-enum-entities.xml create mode 100644 Documentation/DocBook/v4l/media-ioc-enum-links.xml create mode 100644 Documentation/DocBook/v4l/media-ioc-setup-link.xml create mode 100644 Documentation/DocBook/v4l/subdev-formats.xml create mode 100644 Documentation/DocBook/v4l/vidioc-subdev-enum-frame-interval.xml create mode 100644 Documentation/DocBook/v4l/vidioc-subdev-enum-frame-size.xml create mode 100644 Documentation/DocBook/v4l/vidioc-subdev-enum-mbus-code.xml create mode 100644 Documentation/DocBook/v4l/vidioc-subdev-g-crop.xml create mode 100644 Documentation/DocBook/v4l/vidioc-subdev-g-fmt.xml create mode 100644 Documentation/DocBook/v4l/vidioc-subdev-g-frame-interval.xml create mode 100644 Documentation/media-framework.txt create mode 100644 arch/arm/mach-omap2/devices.h create mode 100644 drivers/bluetooth/btwilink.c create mode 100644 drivers/media/media-device.c create mode 100644 drivers/media/media-devnode.c create mode 100644 drivers/media/media-entity.c create mode 100644 drivers/media/radio/wl128x/Kconfig create mode 100644 drivers/media/radio/wl128x/Makefile create mode 100644 drivers/media/radio/wl128x/fmdrv.h create mode 100644 drivers/media/radio/wl128x/fmdrv_common.c create mode 100644 drivers/media/radio/wl128x/fmdrv_common.h create mode 100644 drivers/media/radio/wl128x/fmdrv_rx.c create mode 100644 drivers/media/radio/wl128x/fmdrv_rx.h create mode 100644 drivers/media/radio/wl128x/fmdrv_tx.c create mode 100644 drivers/media/radio/wl128x/fmdrv_tx.h create mode 100644 drivers/media/radio/wl128x/fmdrv_v4l2.c create mode 100644 drivers/media/radio/wl128x/fmdrv_v4l2.h create mode 100644 drivers/media/video/isp/Makefile create mode 100644 drivers/media/video/isp/cfa_coef_table.h create mode 100644 drivers/media/video/isp/gamma_table.h create mode 100644 drivers/media/video/isp/isp.c create mode 100644 drivers/media/video/isp/isp.h create mode 100644 drivers/media/video/isp/ispccdc.c create mode 100644 drivers/media/video/isp/ispccdc.h create mode 100644 drivers/media/video/isp/ispccp2.c create mode 100644 drivers/media/video/isp/ispccp2.h create mode 100644 drivers/media/video/isp/ispcsi2.c create mode 100644 drivers/media/video/isp/ispcsi2.h create mode 100644 drivers/media/video/isp/ispcsiphy.c create mode 100644 drivers/media/video/isp/ispcsiphy.h create mode 100644 drivers/media/video/isp/isph3a.h create mode 100644 drivers/media/video/isp/isph3a_aewb.c create mode 100644 drivers/media/video/isp/isph3a_af.c create mode 100644 drivers/media/video/isp/isphist.c create mode 100644 drivers/media/video/isp/isphist.h create mode 100644 drivers/media/video/isp/isppreview.c create mode 100644 drivers/media/video/isp/isppreview.h create mode 100644 drivers/media/video/isp/ispqueue.c create mode 100644 drivers/media/video/isp/ispqueue.h create mode 100644 drivers/media/video/isp/ispreg.h create mode 100644 drivers/media/video/isp/ispresizer.c create mode 100644 drivers/media/video/isp/ispresizer.h create mode 100644 drivers/media/video/isp/ispstat.c create mode 100644 drivers/media/video/isp/ispstat.h create mode 100644 drivers/media/video/isp/ispvideo.c create mode 100644 drivers/media/video/isp/ispvideo.h create mode 100644 drivers/media/video/isp/luma_enhance_table.h create mode 100644 drivers/media/video/isp/noise_filter_table.h create mode 100644 drivers/media/video/v4l2-subdev.c create mode 100644 drivers/mfd/twl4030-madc.c create mode 100644 drivers/video/omap2/displays/panel-lgphilips-lb035q02.c create mode 100644 drivers/video/omap2/displays/panel-samsung-lte430wq-f0c.c create mode 100644 include/linux/i2c/twl4030-madc.h create mode 100644 include/linux/media.h create mode 100644 include/linux/omap3isp.h create mode 100644 include/linux/v4l2-mediabus.h create mode 100644 include/linux/v4l2-subdev.h create mode 100644 include/media/media-device.h create mode 100644 include/media/media-devnode.h create mode 100644 include/media/media-entity.h
Op 18 jun 2011, om 01:18 heeft Darren Hart het volgende geschreven:
Quoted 8 lines
From: Darren Hart <[email protected]>
The following commits have been pulled in from the meta-ti linux-omap_2.6.37 recipe, with the exception of:
USB: ehci: remove structure packing fromehci_def
which hails from mainline and should be applied to yocto/base, while the rest should be applied to yocto/standard/beagleboard.
Quoted 7 lines
Fixes [YOCTO #764]
Fixes [YOCTO #765]
Fixes [YOCTO #767]This brings linux-yocto in sync with the meta-ti linux-omap_2.6.37 recipe and significantly improves Beagleboard support in linux-yocto. As there are 115 patches in total, and none of them are new, I have omitted them from the email.
You seem to be including the patches that patch the kernel from 37rc7 (or rc8, I forget) to .37 final, which shouldn't apply. So basically leave out the patches in the 'linus' directory. The camera interface also doesn't work, so the 'media' directory can be left out as well.
Quoted 457 lines
The following changes since commit
9cb5c3fb1634e541cacceeb8c8cabe88afa5b080:Merge branch 'yocto/standard/base' into yocto/standard/beagleboard (2011-06-06 10:35:20 -0400)
are available in the git repository at:
git://git.yoctoproject.org/linux-yocto-2.6.37-contribdvhart/yocto/standard/beagleboard
http://git.yoctoproject.org/cgit.cgi/linux-yocto-2.6.37-contrib/log/?h=dvhart/yocto/standard/beagleboardAlexander Holler (1):
arm: omap3: beagle: Ensure msecure is mux'd to be able to set the RTCAntti Koskipaa (1):
v4l:v4l2_subdevuserspace crop APIArik Nemtsov (1):
wl12xx: Read MAC address from NVS file on HW startupDarren Hart (2):
board-omap3beagle: whitespace cleanup
board-omap3beagle: allow for building without wl1271Eliad Peller (1):
wl1271: setwl->vifonly ifadd_interfacesucceeded.Florian Westphal (1):
bridge: stp: ensure mac header is setJesper Juhl (1):
ISDN, Gigaset: Fix memory leak indo_disconnect_req()Juuso Oikarinen (1):
wl12xx: Unset bssid filter, ssid and bssid from firmware on disassocKevin Hilman (1):
OMAP: CPUfreq: ensure policy is fully initializedKoen Kooi (10):
omap3: beaglexm: fix DVI reset GPIO
omap3: beaglexm: fix power on of DVI
ARM: OMAP: beagleboard: Add infrastructure to do fixups based on
expansionboard name passed by u-boot
ARM: OMAP: beagleboard: pre-export GPIOs to userspace when using a
Tincantools trainerboard
modedb.c: add proper 720p60 mode
ARM: OMAP: add omap_rev_* macros
omap3: beagleboard: add WIP support for beagleboardtoys WL12xx board
beagleboard: hack in support from xM rev C
omap3: allow 1GHz mpurates
BeagleBoard: Adjust USER button pin for xMLaurent Pinchart (35):
v4l: Share code betweenvideo_usercopyandvideo_ioctl2
v4l: subdev: Don't require core operations
v4l: subdev: Mergev4l2_i2c_new_subdev_cfgandv4l2_i2c_new_subdev
v4l: subdev: Add device node support
v4l: subdev: Uninline thev4l2_subdev_initfunction
v4l: subdev: Control ioctls support
media: Media device node support
media: Media device
media: Entities, pads and links
media: Entity use count
media: Media device information query
media: Entities, pads and links enumeration
media: Links setup
media: Pipelines and media streams
v4l: Add amedia_devicepointer to thev4l2_devicestructure
v4l: Makevideo_deviceinherit frommedia_entity
v4l: Makev4l2_subdevinherit frommedia_entity
v4l: Move themedia/v4l2-mediabus.hheader toinclude/linux
v4l: Replace enums with fixed-sized fields in public structure
v4l: RenameV4L2_MBUS_FMT_GREY8_1X8toV4L2_MBUS_FMT_Y8_1X8
v4l: Group media bus pixel codes by types and sort them
alphabetically
v4l: subdev: Add a new file operations class
v4l:v4l2_subdevpad-level operations
v4l:v4l2_subdevuserspace format API
v4l:v4l2_subdevuserspace frame interval API
v4l: subdev: Generic ioctl support
v4l: Add subdev sensorg_skip_framesoperation
v4l: Includelinux/videodev2.hinmedia/v4l2-ctrls.h
v4l: Fix a use-before-set in the control framework
v4l: Add 8-bit YUYV on 16-bit bus and SGRBG10 media bus pixel codes
v4l: Add remaining RAW10 patterns w DPCM pixel code variants
v4l: Add missing 12 bits bayer media bus formats
v4l: Add 12 bits bayer pixel formats
omap3: Add function to register omap3isp platform device structure OMAP3 ISP driverLennert Buytenhek (1):
ARM: pxa:PXA_ESERIESdepends onFB_W100.Manjunatha Halli (7):
drivers:media:radio: wl128x: FM Driver common header file drivers:media:radio: wl128x: FM Driver V4L2 sources drivers:media:radio: wl128x: FM Driver Common sources drivers:media:radio: wl128x: FM driver RX sources drivers:media:radio: wl128x: FM driver TX sources drivers:media:radio: wl128x:Kconfig&Makefilefor wl128x driver drivers:media:radio: UpdateKconfigandMakefilefor wl128x FM
driver.Nishanth Menon (2):
omap3|4: opp: makeomapx_opp_initnon-static
OMAP3: beagle xm: enable upto 1GHz OPPPavan Savoy (2):
drivers:misc:ti-st: change protocol parse logic
Bluetooth: btwilink driverPeter 'p2' De Schrijver (1):
OMAP: CPUfreq: ensure driver initializes after cpufreq framework and
governorsRabin Vincent (1):
USB: ehci: remove structure packing fromehci_defRajendra Nayak (1):
OMAP3 PM: CPUFreq driver for OMAP3Robert Nelson (2):
omap: Beagle: detect new xM revision B
xM audio fix from AshokSakari Ailus (2):
v4l: subdev: Events support
media: Entity graph traversalSanjeev Premi (1):
omap3: Add basic support for 720MHz partSergio Aguirre (2):
omap3: Remove unusued ISP CBUFF resource
omap2: Fix camera resources for multiomapShahar Levi (3):
wl1271: 11n Support, Add Definitions
wl1271: 11n Support, ACX Commands
wl1271: 11n Support, functionality and configuration abilitySilesh C V (1):
OMAP: PM: CPUFREQ: Fix conditional compilationStanimir Varbanov (1):
v4l: Create v4l2 subdev file handle structureSteve Sakoman (18):
mmc: don't display single block read console messages
MTD: silence ecc errors on mtdblock0
OMAP: DSS2: enable hsclk indsi_pll_initfor OMAP36XX
drivers: net: smsc911x: return ENODEV if device is not found
drivers: input: touchscreen: ads7846: return ENODEV if device is not
found
ASoC: enable audio capture by default for twl4030
MFD: enable madc clock
MFD: add twl4030 madc driver
ARM: OMAP: Add twl4030 madc support to Overo
ARM: OMAP: Add twl4030 madc support to Beagle
OMAP: DSS2: Add support for Samsung LTE430WQ-F0C panel
OMAP: DSS2: Add support for LG Philips LB035Q02 panel
OMAP: DSS2: add bootarg for selecting svideo or composite for tv
output
ARM: OMAP2: mmc-twl4030: move clock input selection prior to vcc test
RTC: add support for backup battery recharge
ARM: OMAP: automatically set musb mode in platform data based on
CONFIG options
OMAP: DSS2: check for both cpu type and revision, rather than just
revision
OMAP: DSS2: Add DSS2 support for OveroThara Gopinath (13):
OMAP3: PM: Adding T2 enabling of smartreflex
OMAP: Introduce a user list for each voltage domain instance in the
voltage driver.
OMAP: Introduce API in the OPP layer to find the opp entry
corresponding to a voltage.
OMAP: Introduce API to register a device with a voltagedomain
OMAP: Introduce device specific set rate and get rate inomap_device
structure
OMAP: Voltage layer changes to support DVFS.
OMAP: Introduce dependent voltage domain support.
OMAP: Introduce device scale
OMAP: Disable smartreflex across DVFS
OMAP3: Introduce custom set rate and get rate APIs for scalable
devices
OMAP3: Update cpufreq driver to use the newset_rateAPI
OMAP3: Introduce voltage domain info in the hwmod structures.
OMAP3: Add voltage dependency table for VDD1.Thomas Weber (1):
OMAP: Enable Magic SysRq on serial console ttyOxTuukka Toivonen (1):
ARM: OMAP3: Update Camera ISP definitions for OMAP3630Documentation/ABI/testing/sysfs-bus-media | 6 + Documentation/DocBook/Makefile | 5 +- Documentation/DocBook/media-entities.tmpl | 50 + Documentation/DocBook/media.tmpl | 3 + Documentation/DocBook/v4l/dev-subdev.xml | 307 +++ Documentation/DocBook/v4l/media-controller.xml | 89 + Documentation/DocBook/v4l/media-func-close.xml | 59 + Documentation/DocBook/v4l/media-func-ioctl.xml | 116 + Documentation/DocBook/v4l/media-func-open.xml | 94 + .../DocBook/v4l/media-ioc-device-info.xml | 133 ++ .../DocBook/v4l/media-ioc-enum-entities.xml | 308 +++ Documentation/DocBook/v4l/media-ioc-enum-links.xml | 207 ++ Documentation/DocBook/v4l/media-ioc-setup-link.xml | 93 + Documentation/DocBook/v4l/subdev-formats.xml | 2467 ++++++++++++++++++++ Documentation/DocBook/v4l/v4l2.xml | 7 + Documentation/DocBook/v4l/vidioc-streamon.xml | 9 + .../v4l/vidioc-subdev-enum-frame-interval.xml | 146 ++ .../DocBook/v4l/vidioc-subdev-enum-frame-size.xml | 148 ++ .../DocBook/v4l/vidioc-subdev-enum-mbus-code.xml | 113 + Documentation/DocBook/v4l/vidioc-subdev-g-crop.xml | 149 ++ Documentation/DocBook/v4l/vidioc-subdev-g-fmt.xml | 174 ++ .../DocBook/v4l/vidioc-subdev-g-frame-interval.xml | 135 ++ Documentation/media-framework.txt | 353 +++ Documentation/video4linux/v4l2-framework.txt | 129 +- arch/arm/mach-omap2/board-omap3beagle.c | 409 ++++- arch/arm/mach-omap2/board-overo.c | 247 ++- arch/arm/mach-omap2/clock.h | 14 +- arch/arm/mach-omap2/clock34xx.c | 2 + arch/arm/mach-omap2/control.h | 7 + arch/arm/mach-omap2/devices.c | 64 +- arch/arm/mach-omap2/devices.h | 17 + arch/arm/mach-omap2/hsmmc.c | 14 +- arch/arm/mach-omap2/id.c | 10 + arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 3 + arch/arm/mach-omap2/omap_twl.c | 16 + arch/arm/mach-omap2/opp3xxx_data.c | 66 +- arch/arm/mach-omap2/opp4xxx_data.c | 3 +- arch/arm/mach-omap2/pm.c | 110 + arch/arm/mach-omap2/voltage.c | 369 +++- arch/arm/mach-pxa/Kconfig | 1 + arch/arm/plat-omap/clock.c | 2 +- arch/arm/plat-omap/cpu-omap.c | 38 +- arch/arm/plat-omap/include/plat/cpu.h | 57 + arch/arm/plat-omap/include/plat/omap34xx.h | 16 +- arch/arm/plat-omap/include/plat/omap_device.h | 12 +- arch/arm/plat-omap/include/plat/voltage.h | 20 + arch/arm/plat-omap/omap_device.c | 139 ++ block/blk-core.c | 7 +- drivers/base/power/opp.c | 28 + drivers/bluetooth/Kconfig | 10 + drivers/bluetooth/Makefile | 1 + drivers/bluetooth/btwilink.c | 397 ++++ drivers/input/touchscreen/ads7846.c | 13 +- drivers/isdn/gigaset/capi.c | 1 + drivers/media/Kconfig | 22 + drivers/media/Makefile | 10 +- drivers/media/media-device.c | 382 +++ drivers/media/media-devnode.c | 321 +++ drivers/media/media-entity.c | 536 +++++ drivers/media/radio/Kconfig | 3 + drivers/media/radio/Makefile | 1 + drivers/media/radio/radio-si4713.c | 2 +- drivers/media/radio/wl128x/Kconfig | 17 + drivers/media/radio/wl128x/Makefile | 6 + drivers/media/radio/wl128x/fmdrv.h | 244 ++ drivers/media/radio/wl128x/fmdrv_common.c | 1677 +++++++++++++ drivers/media/radio/wl128x/fmdrv_common.h | 402 ++++ drivers/media/radio/wl128x/fmdrv_rx.c | 847 +++++++ drivers/media/radio/wl128x/fmdrv_rx.h | 59 + drivers/media/radio/wl128x/fmdrv_tx.c | 425 ++++ drivers/media/radio/wl128x/fmdrv_tx.h | 37 + drivers/media/radio/wl128x/fmdrv_v4l2.c | 580 +++++ drivers/media/radio/wl128x/fmdrv_v4l2.h | 33 + drivers/media/video/Kconfig | 13 + drivers/media/video/Makefile | 4 +- drivers/media/video/cafe_ccic.c | 11 +- drivers/media/video/davinci/vpfe_capture.c | 2 +- drivers/media/video/davinci/vpif_capture.c | 2 +- drivers/media/video/davinci/vpif_display.c | 2 +- drivers/media/video/isp/Makefile | 13 + drivers/media/video/isp/cfa_coef_table.h | 601 +++++ drivers/media/video/isp/gamma_table.h | 90 + drivers/media/video/isp/isp.c | 2221 ++++++++++++++++++ drivers/media/video/isp/isp.h | 427 ++++ drivers/media/video/isp/ispccdc.c | 2280 ++++++++++++++++++ drivers/media/video/isp/ispccdc.h | 223 ++ drivers/media/video/isp/ispccp2.c | 1189 ++++++++++ drivers/media/video/isp/ispccp2.h | 101 + drivers/media/video/isp/ispcsi2.c | 1332 +++++++++++ drivers/media/video/isp/ispcsi2.h | 169 ++ drivers/media/video/isp/ispcsiphy.c | 247 ++ drivers/media/video/isp/ispcsiphy.h | 74 + drivers/media/video/isp/isph3a.h | 117 + drivers/media/video/isp/isph3a_aewb.c | 374 +++ drivers/media/video/isp/isph3a_af.c | 429 ++++ drivers/media/video/isp/isphist.c | 520 ++++ drivers/media/video/isp/isphist.h | 40 + drivers/media/video/isp/isppreview.c | 2120 +++++++++++++++++ drivers/media/video/isp/isppreview.h | 214 ++ drivers/media/video/isp/ispqueue.c | 1136 +++++++++ drivers/media/video/isp/ispqueue.h | 185 ++ drivers/media/video/isp/ispreg.h | 1589 +++++++++++++ drivers/media/video/isp/ispresizer.c | 1710 ++++++++++++++ drivers/media/video/isp/ispresizer.h | 150 ++ drivers/media/video/isp/ispstat.c | 1100 +++++++++ drivers/media/video/isp/ispstat.h | 169 ++ drivers/media/video/isp/ispvideo.c | 1264 ++++++++++ drivers/media/video/isp/ispvideo.h | 202 ++ drivers/media/video/isp/luma_enhance_table.h | 154 ++ drivers/media/video/isp/noise_filter_table.h | 90 + drivers/media/video/ivtv/ivtv-i2c.c | 11 +- drivers/media/video/mt9m001.c | 2 +- drivers/media/video/mt9v022.c | 4 +- drivers/media/video/ov6650.c | 10 +- drivers/media/video/s5p-fimc/fimc-capture.c | 2 +- drivers/media/video/sh_mobile_csi2.c | 6 +- drivers/media/video/sh_vou.c | 2 +- drivers/media/video/soc_camera.c | 2 +- drivers/media/video/soc_mediabus.c | 2 +- drivers/media/video/v4l2-common.c | 22 +- drivers/media/video/v4l2-ctrls.c | 2 +- drivers/media/video/v4l2-dev.c | 76 +- drivers/media/video/v4l2-device.c | 66 +- drivers/media/video/v4l2-ioctl.c | 216 +-- drivers/media/video/v4l2-subdev.c | 346 +++ drivers/mfd/Kconfig | 21 + drivers/mfd/Makefile | 1 + drivers/mfd/twl-core.c | 8 + drivers/mfd/twl4030-madc.c | 537 +++++ drivers/misc/ti-st/st_core.c | 355 +-- drivers/misc/ti-st/st_kim.c | 56 +- drivers/mmc/card/block.c | 4 +- drivers/mtd/nand/nand_ecc.c | 2 +- drivers/net/smsc911x.c | 4 +- drivers/net/wireless/wl12xx/Kconfig | 10 + drivers/net/wireless/wl12xx/wl1271.h | 11 +- drivers/net/wireless/wl12xx/wl1271_acx.c | 83 + drivers/net/wireless/wl12xx/wl1271_acx.h | 86 + drivers/net/wireless/wl12xx/wl1271_main.c | 161 +- drivers/net/wireless/wl12xx/wl1271_rx.c | 6 + drivers/net/wireless/wl12xx/wl1271_tx.c | 11 + drivers/rtc/rtc-twl.c | 25 + drivers/serial/omap-serial.c | 4 + drivers/video/modedb.c | 4 + drivers/video/omap2/displays/Kconfig | 12 + drivers/video/omap2/displays/Makefile | 2 + .../omap2/displays/panel-lgphilips-lb035q02.c | 244 ++ .../omap2/displays/panel-samsung-lte430wq-f0c.c | 154 ++ drivers/video/omap2/dss/dispc.c | 4 +- drivers/video/omap2/dss/dpi.c | 7 +- drivers/video/omap2/dss/venc.c | 22 + drivers/video/omap2/omapfb/omapfb-main.c | 10 +- fs/buffer.c | 3 +- include/linux/Kbuild | 4 + include/linux/i2c/twl.h | 1 + include/linux/i2c/twl4030-madc.h | 130 + include/linux/media.h | 132 ++ include/linux/omap3isp.h | 631 +++++ include/linux/opp.h | 8 + include/linux/ti_wilink_st.h | 40 +- include/linux/usb/ehci_def.h | 6 +- include/linux/v4l2-mediabus.h | 108 + include/linux/v4l2-subdev.h | 141 ++ include/linux/videodev2.h | 4 + include/media/media-device.h | 95 + include/media/media-devnode.h | 97 + include/media/media-entity.h | 147 ++ include/media/soc_mediabus.h | 3 +- include/media/v4l2-common.h | 18 +- include/media/v4l2-ctrls.h | 1 + include/media/v4l2-dev.h | 25 +- include/media/v4l2-device.h | 4 + include/media/v4l2-ioctl.h | 3 + include/media/v4l2-mediabus.h | 61 +- include/media/v4l2-subdev.h | 120 +- net/bridge/br_stp_bpdu.c | 2 + sound/soc/codecs/twl4030.c | 4 +- sound/soc/omap/omap-mcbsp.c | 3 + 178 files changed, 37220 insertions(+), 745 deletions(-)create mode 100644
Documentation/ABI/testing/sysfs-bus-media
create mode 100644Documentation/DocBook/v4l/dev-subdev.xml
create mode 100644Documentation/DocBook/v4l/media-controller.xmlcreate mode 100644Documentation/DocBook/v4l/media-func-close.xmlcreate mode 100644Documentation/DocBook/v4l/media-func-ioctl.xmlcreate mode 100644Documentation/DocBook/v4l/media-func-open.xmlcreate mode 100644Documentation/DocBook/v4l/media-ioc-device-info.xmlcreate mode 100644Documentation/DocBook/v4l/media-ioc-enum-entities.xmlcreate mode 100644Documentation/DocBook/v4l/media-ioc-enum-links.xmlcreate mode 100644Documentation/DocBook/v4l/media-ioc-setup-link.xmlcreate mode 100644Documentation/DocBook/v4l/subdev-formats.xmlcreate mode 100644Documentation/DocBook/v4l/vidioc-subdev-enum-frame-interval.xmlcreate mode 100644Documentation/DocBook/v4l/vidioc-subdev-enum-frame-size.xmlcreate mode 100644Documentation/DocBook/v4l/vidioc-subdev-enum-mbus-code.xmlcreate mode 100644Documentation/DocBook/v4l/vidioc-subdev-g-crop.xmlcreate mode 100644Documentation/DocBook/v4l/vidioc-subdev-g-fmt.xmlcreate mode 100644Documentation/DocBook/v4l/vidioc-subdev-g-frame-interval.xmlcreate mode 100644Documentation/media-framework.txt
create mode 100644arch/arm/mach-omap2/devices.h
create mode 100644drivers/bluetooth/btwilink.c
create mode 100644drivers/media/media-device.c
create mode 100644drivers/media/media-devnode.c
create mode 100644drivers/media/media-entity.c
create mode 100644drivers/media/radio/wl128x/Kconfig
create mode 100644drivers/media/radio/wl128x/Makefile
create mode 100644drivers/media/radio/wl128x/fmdrv.h
create mode 100644drivers/media/radio/wl128x/fmdrv_common.c
create mode 100644drivers/media/radio/wl128x/fmdrv_common.h
create mode 100644drivers/media/radio/wl128x/fmdrv_rx.c
create mode 100644drivers/media/radio/wl128x/fmdrv_rx.h
create mode 100644drivers/media/radio/wl128x/fmdrv_tx.c
create mode 100644drivers/media/radio/wl128x/fmdrv_tx.h
create mode 100644drivers/media/radio/wl128x/fmdrv_v4l2.c
create mode 100644drivers/media/radio/wl128x/fmdrv_v4l2.h
create mode 100644drivers/media/video/isp/Makefile
create mode 100644drivers/media/video/isp/cfa_coef_table.h
create mode 100644drivers/media/video/isp/gamma_table.h
create mode 100644drivers/media/video/isp/isp.c
create mode 100644drivers/media/video/isp/isp.h
create mode 100644drivers/media/video/isp/ispccdc.c
create mode 100644drivers/media/video/isp/ispccdc.h
create mode 100644drivers/media/video/isp/ispccp2.c
create mode 100644drivers/media/video/isp/ispccp2.h
create mode 100644drivers/media/video/isp/ispcsi2.c
create mode 100644drivers/media/video/isp/ispcsi2.h
create mode 100644drivers/media/video/isp/ispcsiphy.c
create mode 100644drivers/media/video/isp/ispcsiphy.h
create mode 100644drivers/media/video/isp/isph3a.h
create mode 100644drivers/media/video/isp/isph3a_aewb.c
create mode 100644drivers/media/video/isp/isph3a_af.c
create mode 100644drivers/media/video/isp/isphist.c
create mode 100644drivers/media/video/isp/isphist.h
create mode 100644drivers/media/video/isp/isppreview.c
create mode 100644drivers/media/video/isp/isppreview.h
create mode 100644drivers/media/video/isp/ispqueue.c
create mode 100644drivers/media/video/isp/ispqueue.h
create mode 100644drivers/media/video/isp/ispreg.h
create mode 100644drivers/media/video/isp/ispresizer.c
create mode 100644drivers/media/video/isp/ispresizer.h
create mode 100644drivers/media/video/isp/ispstat.c
create mode 100644drivers/media/video/isp/ispstat.h
create mode 100644drivers/media/video/isp/ispvideo.c
create mode 100644drivers/media/video/isp/ispvideo.h
create mode 100644drivers/media/video/isp/luma_enhance_table.hcreate mode 100644drivers/media/video/isp/noise_filter_table.hcreate mode 100644drivers/media/video/v4l2-subdev.c
create mode 100644drivers/mfd/twl4030-madc.c
create mode 100644drivers/video/omap2/displays/panel-lgphilips-lb035q02.ccreate mode 100644drivers/video/omap2/displays/panel-samsung-lte430wq-f0c.ccreate mode 100644include/linux/i2c/twl4030-madc.h
create mode 100644include/linux/media.h
create mode 100644include/linux/omap3isp.h
create mode 100644include/linux/v4l2-mediabus.h
create mode 100644include/linux/v4l2-subdev.h
create mode 100644include/media/media-device.h
create mode 100644include/media/media-devnode.h
create mode 100644include/media/media-entity.h_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Quoted 19 lines · Koen Kooi
Op 18 jun 2011, om 01:18 heeft Darren Hart het volgende geschreven:
Quoted 8 lines
From: Darren Hart <[email protected]>
The following commits have been pulled in from the meta-ti linux-omap_2.6.37 recipe, with the exception of: USB: ehci: remove structure packing from
ehci_defwhich hails from mainline and should be applied to yocto/base, while the rest should be applied to yocto/standard/beagleboard.Quoted 6 lines
Fixes [YOCTO #764] Fixes [YOCTO #765] Fixes [YOCTO #767]
This brings linux-yocto in sync with the meta-ti linux-omap_2.6.37 recipe and significantly improves Beagleboard support in linux-yocto. As there are 115 patches in total, and none of them are new, I have omitted them from the email.
Quoted 3 lines
You seem to be including the patches that patch the kernel from 37rc7 (or rc8, I forget) to .37 final, which shouldn't apply. So basically leave out the patches in the 'linus' directory.
There were about 200 patches in total, I've removed all those that reverse applied and failed do to a conflict that was obviously a merge of a very similar patch. That accounted for most of the 37-rc[78] to 37 patches from the linus directory.
Quoted 3 lines
The camera
interface also doesn't work, so the 'media' directory can be left out as well.
The goal was to stay as close to the meta-ti/linux-omap_2.6.37 recipe as possible with the linux-yocto kernel repository. Will you be removing all of the media directory from there as well? I don't want to remove them from here if you'll be *adding* to them there. However, if you'll be sure to just be replacing them there, then I can drop them here.
--
Darren
Quoted 8 lines
Quoted 8 lines
The following changes since commit
9cb5c3fb1634e541cacceeb8c8cabe88afa5b080:Merge branch 'yocto/standard/base' into yocto/standard/beagleboard (2011-06-06 10:35:20 -0400)
Quoted 8 lines
Quoted 8 lines
are available in the git repository at:
git://git.yoctoproject.org/linux-yocto-2.6.37-contrib
dvhart/yocto/standard/beagleboard
http://git.yoctoproject.org/cgit.cgi/linux-yocto-2.6.37-contrib/log/?h=dvhart/yocto/standard/beagleboard
Alexander Holler (1):
Quoted 408 lines
Quoted 407 lines
arm: omap3: beagle: Ensure msecure is mux'd to be able to set the RTC
Antti Koskipaa (1): v4l:
v4l2_subdevuserspace crop APIArik Nemtsov (1): wl12xx: Read MAC address from NVS file on HW startup
Darren Hart (2): board-omap3beagle: whitespace cleanup
board-omap3beagle: allow for building without wl1271Eliad Peller (1): wl1271: set
wl->vifonly ifadd_interfacesucceeded.Florian Westphal (1): bridge: stp: ensure mac header is set
Jesper Juhl (1): ISDN, Gigaset: Fix memory leak in
do_disconnect_req()Juuso Oikarinen (1): wl12xx: Unset bssid filter, ssid and bssid from firmware on disassoc
Kevin Hilman (1): OMAP: CPUfreq: ensure policy is fully initialized
Koen Kooi (10): omap3: beaglexm: fix DVI reset GPIO omap3:
beaglexm: fix power on of DVI ARM: OMAP: beagleboard: Add infrastructure to do fixups based on expansionboard name passed by u-boot ARM: OMAP: beagleboard: pre-export GPIOs to userspace when using a Tincantools trainerboardmodedb.c: add proper 720p60 mode
ARM: OMAP: add omap_rev_* macros omap3: beagleboard: add WIP support for beagleboardtoys WL12xx board beagleboard: hack in support from xM rev C omap3: allow 1GHz mpurates BeagleBoard:
Adjust USER button pin for xMLaurent Pinchart (35): v4l: Share code between
video_usercopyandvideo_ioctl2v4l: subdev: Don't require core operations v4l:
subdev: Mergev4l2_i2c_new_subdev_cfgandv4l2_i2c_new_subdevv4l:
subdev: Add device node support v4l: subdev: Uninline thev4l2_subdev_initfunction v4l: subdev: Control ioctls support
media: Media device node support media: Media device media:
Entities, pads and links media: Entity use count media: Media device information query media: Entities, pads and links enumeration media: Links setup media: Pipelines and media streams
v4l: Add amedia_devicepointer to thev4l2_devicestructure v4l:
Makevideo_deviceinherit frommedia_entityv4l: Makev4l2_subdevinherit frommedia_entityv4l: Move themedia/v4l2-mediabus.hheader toinclude/linuxv4l: Replace enums with fixed-sized fields in public structure v4l: RenameV4L2_MBUS_FMT_GREY8_1X8toV4L2_MBUS_FMT_Y8_1X8v4l: Group media bus pixel codes by types and sort them alphabetically v4l: subdev: Add a new file operations class v4l:v4l2_subdevpad-level operations v4l:v4l2_subdevuserspace format API v4l:v4l2_subdevuserspace frame interval API
v4l: subdev: Generic ioctl support v4l: Add subdev sensorg_skip_framesoperation v4l: Includelinux/videodev2.hinmedia/v4l2-ctrls.hv4l: Fix a use-before-set in the control framework v4l: Add 8-bit YUYV on 16-bit bus and SGRBG10 media bus pixel codes v4l: Add remaining RAW10 patterns w DPCM pixel code variants v4l: Add missing 12 bits bayer media bus formats v4l: Add 12 bits bayer pixel formats omap3: Add function to register omap3isp platform device structure OMAP3 ISP driverLennert Buytenhek (1): ARM: pxa:
PXA_ESERIESdepends onFB_W100.Manjunatha Halli (7): drivers:media:radio: wl128x: FM Driver common header file drivers:media:radio: wl128x: FM Driver V4L2 sources drivers:media:radio: wl128x: FM Driver Common sources drivers:media:radio: wl128x: FM driver RX sources drivers:media:radio: wl128x: FM driver TX sources drivers:media:radio: wl128x:
Kconfig&Makefilefor wl128x driver drivers:media:radio: UpdateKconfigandMakefilefor wl128x FM driver.Nishanth Menon (2): omap3|4: opp: make
omapx_opp_initnon-static
OMAP3: beagle xm: enable upto 1GHz OPPPavan Savoy (2): drivers:misc:ti-st: change protocol parse logic
Bluetooth: btwilink driverPeter 'p2' De Schrijver (1): OMAP: CPUfreq: ensure driver initializes after cpufreq framework and governors
Rabin Vincent (1): USB: ehci: remove structure packing from
ehci_defRajendra Nayak (1): OMAP3 PM: CPUFreq driver for OMAP3
Robert Nelson (2): omap: Beagle: detect new xM revision B xM audio fix from Ashok
Sakari Ailus (2): v4l: subdev: Events support media: Entity graph traversal
Sanjeev Premi (1): omap3: Add basic support for 720MHz part
Sergio Aguirre (2): omap3: Remove unusued ISP CBUFF resource omap2:
Fix camera resources for multiomapShahar Levi (3): wl1271: 11n Support, Add Definitions wl1271: 11n Support, ACX Commands wl1271: 11n Support, functionality and configuration ability
Silesh C V (1): OMAP: PM: CPUFREQ: Fix conditional compilation
Stanimir Varbanov (1): v4l: Create v4l2 subdev file handle structure
Steve Sakoman (18): mmc: don't display single block read console messages MTD: silence ecc errors on mtdblock0 OMAP: DSS2: enable hsclk in
dsi_pll_initfor OMAP36XX drivers: net: smsc911x: return ENODEV if device is not found drivers: input: touchscreen: ads7846:
return ENODEV if device is not found ASoC: enable audio capture by default for twl4030 MFD: enable madc clock MFD: add twl4030 madc driver ARM: OMAP: Add twl4030 madc support to Overo ARM: OMAP: Add twl4030 madc support to Beagle OMAP: DSS2: Add support for Samsung LTE430WQ-F0C panel OMAP: DSS2: Add support for LG Philips LB035Q02 panel OMAP: DSS2: add bootarg for selecting svideo or composite for tv output ARM: OMAP2: mmc-twl4030: move clock input selection prior to vcc test RTC: add support for backup battery recharge ARM: OMAP:
automatically set musb mode in platform data based on CONFIG options OMAP: DSS2: check for both cpu type and revision, rather than just revision OMAP: DSS2: Add DSS2 support for OveroThara Gopinath (13): OMAP3: PM: Adding T2 enabling of smartreflex
OMAP: Introduce a user list for each voltage domain instance in the voltage driver. OMAP: Introduce API in the OPP layer to find the opp entry corresponding to a voltage. OMAP: Introduce API to register a device with a voltagedomain OMAP: Introduce device specific set rate and get rate inomap_devicestructure OMAP:
Voltage layer changes to support DVFS. OMAP: Introduce dependent voltage domain support. OMAP: Introduce device scale OMAP: Disable smartreflex across DVFS OMAP3: Introduce custom set rate and get rate APIs for scalable devices OMAP3: Update cpufreq driver to use the newset_rateAPI OMAP3: Introduce voltage domain info in the hwmod structures. OMAP3: Add voltage dependency table for VDD1.Thomas Weber (1): OMAP: Enable Magic SysRq on serial console ttyOx
Tuukka Toivonen (1): ARM: OMAP3: Update Camera ISP definitions for OMAP3630
Documentation/ABI/testing/sysfs-bus-media | 6 + Documentation/DocBook/Makefile | 5 +- Documentation/DocBook/media-entities.tmpl | 50 + Documentation/DocBook/media.tmpl | 3 + Documentation/DocBook/v4l/dev-subdev.xml | 307 +++ Documentation/DocBook/v4l/media-controller.xml | 89 + Documentation/DocBook/v4l/media-func-close.xml | 59 + Documentation/DocBook/v4l/media-func-ioctl.xml | 116 + Documentation/DocBook/v4l/media-func-open.xml | 94 + .../DocBook/v4l/media-ioc-device-info.xml | 133 ++ .../DocBook/v4l/media-ioc-enum-entities.xml | 308 +++ Documentation/DocBook/v4l/media-ioc-enum-links.xml | 207 ++ Documentation/DocBook/v4l/media-ioc-setup-link.xml | 93 + Documentation/DocBook/v4l/subdev-formats.xml | 2467 ++++++++++++++++++++ Documentation/DocBook/v4l/v4l2.xml | 7 + Documentation/DocBook/v4l/vidioc-streamon.xml | 9 + .../v4l/vidioc-subdev-enum-frame-interval.xml | 146 ++ .../DocBook/v4l/vidioc-subdev-enum-frame-size.xml | 148 ++ .../DocBook/v4l/vidioc-subdev-enum-mbus-code.xml | 113 + Documentation/DocBook/v4l/vidioc-subdev-g-crop.xml | 149 ++ Documentation/DocBook/v4l/vidioc-subdev-g-fmt.xml | 174 ++ .../DocBook/v4l/vidioc-subdev-g-frame-interval.xml | 135 ++ Documentation/media-framework.txt | 353 +++ Documentation/video4linux/v4l2-framework.txt | 129 +- arch/arm/mach-omap2/board-omap3beagle.c | 409 ++++- arch/arm/mach-omap2/board-overo.c | 247 ++- arch/arm/mach-omap2/clock.h | 14 +- arch/arm/mach-omap2/clock34xx.c | 2 + arch/arm/mach-omap2/control.h | 7 + arch/arm/mach-omap2/devices.c | 64 +- arch/arm/mach-omap2/devices.h | 17 + arch/arm/mach-omap2/hsmmc.c | 14 +- arch/arm/mach-omap2/id.c | 10 + arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 3 + arch/arm/mach-omap2/omap_twl.c | 16 + arch/arm/mach-omap2/opp3xxx_data.c | 66 +- arch/arm/mach-omap2/opp4xxx_data.c | 3 +- arch/arm/mach-omap2/pm.c | 110 + arch/arm/mach-omap2/voltage.c | 369 +++- arch/arm/mach-pxa/Kconfig | 1 + arch/arm/plat-omap/clock.c | 2 +- arch/arm/plat-omap/cpu-omap.c | 38 +- arch/arm/plat-omap/include/plat/cpu.h | 57 + arch/arm/plat-omap/include/plat/omap34xx.h | 16 +- arch/arm/plat-omap/include/plat/omap_device.h | 12 +- arch/arm/plat-omap/include/plat/voltage.h | 20 + arch/arm/plat-omap/omap_device.c | 139 ++ block/blk-core.c | 7 +- drivers/base/power/opp.c | 28 + drivers/bluetooth/Kconfig | 10 + drivers/bluetooth/Makefile | 1 + drivers/bluetooth/btwilink.c | 397 ++++ drivers/input/touchscreen/ads7846.c | 13 +- drivers/isdn/gigaset/capi.c | 1 + drivers/media/Kconfig | 22 + drivers/media/Makefile | 10 +- drivers/media/media-device.c | 382 +++ drivers/media/media-devnode.c | 321 +++ drivers/media/media-entity.c | 536 +++++ drivers/media/radio/Kconfig | 3 + drivers/media/radio/Makefile | 1 + drivers/media/radio/radio-si4713.c | 2 +- drivers/media/radio/wl128x/Kconfig | 17 + drivers/media/radio/wl128x/Makefile | 6 + drivers/media/radio/wl128x/fmdrv.h | 244 ++ drivers/media/radio/wl128x/fmdrv_common.c | 1677 +++++++++++++ drivers/media/radio/wl128x/fmdrv_common.h | 402 ++++ drivers/media/radio/wl128x/fmdrv_rx.c | 847 +++++++ drivers/media/radio/wl128x/fmdrv_rx.h | 59 + drivers/media/radio/wl128x/fmdrv_tx.c | 425 ++++ drivers/media/radio/wl128x/fmdrv_tx.h | 37 + drivers/media/radio/wl128x/fmdrv_v4l2.c | 580 +++++ drivers/media/radio/wl128x/fmdrv_v4l2.h | 33 + drivers/media/video/Kconfig | 13 + drivers/media/video/Makefile | 4 +- drivers/media/video/cafe_ccic.c | 11 +- drivers/media/video/davinci/vpfe_capture.c | 2 +- drivers/media/video/davinci/vpif_capture.c | 2 +- drivers/media/video/davinci/vpif_display.c | 2 +- drivers/media/video/isp/Makefile | 13 + drivers/media/video/isp/cfa_coef_table.h | 601 +++++ drivers/media/video/isp/gamma_table.h | 90 + drivers/media/video/isp/isp.c | 2221 ++++++++++++++++++ drivers/media/video/isp/isp.h | 427 ++++ drivers/media/video/isp/ispccdc.c | 2280 ++++++++++++++++++ drivers/media/video/isp/ispccdc.h | 223 ++ drivers/media/video/isp/ispccp2.c | 1189 ++++++++++ drivers/media/video/isp/ispccp2.h | 101 + drivers/media/video/isp/ispcsi2.c | 1332 +++++++++++ drivers/media/video/isp/ispcsi2.h | 169 ++ drivers/media/video/isp/ispcsiphy.c | 247 ++ drivers/media/video/isp/ispcsiphy.h | 74 + drivers/media/video/isp/isph3a.h | 117 + drivers/media/video/isp/isph3a_aewb.c | 374 +++ drivers/media/video/isp/isph3a_af.c | 429 ++++ drivers/media/video/isp/isphist.c | 520 ++++ drivers/media/video/isp/isphist.h | 40 + drivers/media/video/isp/isppreview.c | 2120 +++++++++++++++++ drivers/media/video/isp/isppreview.h | 214 ++ drivers/media/video/isp/ispqueue.c | 1136 +++++++++ drivers/media/video/isp/ispqueue.h | 185 ++ drivers/media/video/isp/ispreg.h | 1589 +++++++++++++ drivers/media/video/isp/ispresizer.c | 1710 ++++++++++++++ drivers/media/video/isp/ispresizer.h | 150 ++ drivers/media/video/isp/ispstat.c | 1100 +++++++++ drivers/media/video/isp/ispstat.h | 169 ++ drivers/media/video/isp/ispvideo.c | 1264 ++++++++++ drivers/media/video/isp/ispvideo.h | 202 ++ drivers/media/video/isp/luma_enhance_table.h | 154 ++ drivers/media/video/isp/noise_filter_table.h | 90 + drivers/media/video/ivtv/ivtv-i2c.c | 11 +- drivers/media/video/mt9m001.c | 2 +- drivers/media/video/mt9v022.c | 4 +- drivers/media/video/ov6650.c | 10 +- drivers/media/video/s5p-fimc/fimc-capture.c | 2 +- drivers/media/video/sh_mobile_csi2.c | 6 +- drivers/media/video/sh_vou.c | 2 +- drivers/media/video/soc_camera.c | 2 +- drivers/media/video/soc_mediabus.c | 2 +- drivers/media/video/v4l2-common.c | 22 +- drivers/media/video/v4l2-ctrls.c | 2 +- drivers/media/video/v4l2-dev.c | 76 +- drivers/media/video/v4l2-device.c | 66 +- drivers/media/video/v4l2-ioctl.c | 216 +-- drivers/media/video/v4l2-subdev.c | 346 +++ drivers/mfd/Kconfig | 21 + drivers/mfd/Makefile | 1 + drivers/mfd/twl-core.c | 8 + drivers/mfd/twl4030-madc.c | 537 +++++ drivers/misc/ti-st/st_core.c | 355 +-- drivers/misc/ti-st/st_kim.c | 56 +- drivers/mmc/card/block.c | 4 +- drivers/mtd/nand/nand_ecc.c | 2 +- drivers/net/smsc911x.c | 4 +- drivers/net/wireless/wl12xx/Kconfig | 10 + drivers/net/wireless/wl12xx/wl1271.h | 11 +- drivers/net/wireless/wl12xx/wl1271_acx.c | 83 + drivers/net/wireless/wl12xx/wl1271_acx.h | 86 + drivers/net/wireless/wl12xx/wl1271_main.c | 161 +- drivers/net/wireless/wl12xx/wl1271_rx.c | 6 + drivers/net/wireless/wl12xx/wl1271_tx.c | 11 + drivers/rtc/rtc-twl.c | 25 + drivers/serial/omap-serial.c | 4 + drivers/video/modedb.c | 4 + drivers/video/omap2/displays/Kconfig | 12 + drivers/video/omap2/displays/Makefile | 2 + .../omap2/displays/panel-lgphilips-lb035q02.c | 244 ++ .../omap2/displays/panel-samsung-lte430wq-f0c.c | 154 ++ drivers/video/omap2/dss/dispc.c | 4 +- drivers/video/omap2/dss/dpi.c | 7 +- drivers/video/omap2/dss/venc.c | 22 + drivers/video/omap2/omapfb/omapfb-main.c | 10 +- fs/buffer.c | 3 +- include/linux/Kbuild | 4 + include/linux/i2c/twl.h | 1 + include/linux/i2c/twl4030-madc.h | 130 + include/linux/media.h | 132 ++ include/linux/omap3isp.h | 631 +++++ include/linux/opp.h | 8 + include/linux/ti_wilink_st.h | 40 +- include/linux/usb/ehci_def.h | 6 +- include/linux/v4l2-mediabus.h | 108 + include/linux/v4l2-subdev.h | 141 ++ include/linux/videodev2.h | 4 + include/media/media-device.h | 95 + include/media/media-devnode.h | 97 + include/media/media-entity.h | 147 ++ include/media/soc_mediabus.h | 3 +- include/media/v4l2-common.h | 18 +- include/media/v4l2-ctrls.h | 1 + include/media/v4l2-dev.h | 25 +- include/media/v4l2-device.h | 4 + include/media/v4l2-ioctl.h | 3 + include/media/v4l2-mediabus.h | 61 +- include/media/v4l2-subdev.h | 120 +- net/bridge/br_stp_bpdu.c | 2 + sound/soc/codecs/twl4030.c | 4 +- sound/soc/omap/omap-mcbsp.c | 3 + 178files changed, 37220 insertions(+), 745 deletions(-) create mode 100644
Documentation/ABI/testing/sysfs-bus-mediacreate mode 100644Documentation/DocBook/v4l/dev-subdev.xmlcreate mode 100644Documentation/DocBook/v4l/media-controller.xmlcreate mode 100644Documentation/DocBook/v4l/media-func-close.xmlcreate mode 100644Documentation/DocBook/v4l/media-func-ioctl.xmlcreate mode 100644Documentation/DocBook/v4l/media-func-open.xmlcreate mode 100644Documentation/DocBook/v4l/media-ioc-device-info.xmlcreate mode 100644Documentation/DocBook/v4l/media-ioc-enum-entities.xmlcreate mode 100644Documentation/DocBook/v4l/media-ioc-enum-links.xmlcreate mode 100644Documentation/DocBook/v4l/media-ioc-setup-link.xmlcreate mode 100644Documentation/DocBook/v4l/subdev-formats.xmlcreate mode 100644Documentation/DocBook/v4l/vidioc-subdev-enum-frame-interval.xmlcreate mode 100644Documentation/DocBook/v4l/vidioc-subdev-enum-frame-size.xmlcreate mode 100644Documentation/DocBook/v4l/vidioc-subdev-enum-mbus-code.xmlcreate mode 100644Documentation/DocBook/v4l/vidioc-subdev-g-crop.xmlcreate mode 100644Documentation/DocBook/v4l/vidioc-subdev-g-fmt.xmlcreate mode 100644Documentation/DocBook/v4l/vidioc-subdev-g-frame-interval.xmlcreate mode 100644Documentation/media-framework.txtcreate mode 100644arch/arm/mach-omap2/devices.hcreate mode 100644drivers/bluetooth/btwilink.ccreate mode 100644drivers/media/media-device.ccreate mode 100644drivers/media/media-devnode.ccreate mode 100644drivers/media/media-entity.ccreate mode 100644drivers/media/radio/wl128x/Kconfigcreate mode 100644drivers/media/radio/wl128x/Makefilecreate mode 100644drivers/media/radio/wl128x/fmdrv.hcreate mode 100644drivers/media/radio/wl128x/fmdrv_common.ccreate mode 100644drivers/media/radio/wl128x/fmdrv_common.hcreate mode 100644drivers/media/radio/wl128x/fmdrv_rx.ccreate mode 100644drivers/media/radio/wl128x/fmdrv_rx.hcreate mode 100644drivers/media/radio/wl128x/fmdrv_tx.ccreate mode 100644drivers/media/radio/wl128x/fmdrv_tx.hcreate mode 100644drivers/media/radio/wl128x/fmdrv_v4l2.ccreate mode 100644drivers/media/radio/wl128x/fmdrv_v4l2.hcreate mode 100644drivers/media/video/isp/Makefilecreate mode 100644drivers/media/video/isp/cfa_coef_table.hcreate mode 100644drivers/media/video/isp/gamma_table.hcreate mode 100644drivers/media/video/isp/isp.ccreate mode 100644drivers/media/video/isp/isp.hcreate mode 100644drivers/media/video/isp/ispccdc.ccreate mode 100644drivers/media/video/isp/ispccdc.hcreate mode 100644drivers/media/video/isp/ispccp2.ccreate mode 100644drivers/media/video/isp/ispccp2.hcreate mode 100644drivers/media/video/isp/ispcsi2.ccreate mode 100644drivers/media/video/isp/ispcsi2.hcreate mode 100644drivers/media/video/isp/ispcsiphy.ccreate mode 100644drivers/media/video/isp/ispcsiphy.hcreate mode 100644drivers/media/video/isp/isph3a.hcreate mode 100644drivers/media/video/isp/isph3a_aewb.ccreate mode 100644drivers/media/video/isp/isph3a_af.ccreate mode 100644drivers/media/video/isp/isphist.ccreate mode 100644drivers/media/video/isp/isphist.hcreate mode 100644drivers/media/video/isp/isppreview.ccreate mode 100644drivers/media/video/isp/isppreview.hcreate mode 100644drivers/media/video/isp/ispqueue.ccreate mode 100644drivers/media/video/isp/ispqueue.hcreate mode 100644drivers/media/video/isp/ispreg.hcreate mode 100644drivers/media/video/isp/ispresizer.ccreate mode 100644drivers/media/video/isp/ispresizer.hcreate mode 100644drivers/media/video/isp/ispstat.ccreate mode 100644drivers/media/video/isp/ispstat.hcreate mode 100644drivers/media/video/isp/ispvideo.ccreate mode 100644drivers/media/video/isp/ispvideo.hcreate mode 100644drivers/media/video/isp/luma_enhance_table.hcreate mode 100644drivers/media/video/isp/noise_filter_table.hcreate mode 100644drivers/media/video/v4l2-subdev.ccreate mode 100644drivers/mfd/twl4030-madc.ccreate mode 100644drivers/video/omap2/displays/panel-lgphilips-lb035q02.ccreate mode 100644drivers/video/omap2/displays/panel-samsung-lte430wq-f0c.ccreate mode 100644include/linux/i2c/twl4030-madc.hcreate mode 100644include/linux/media.hcreate mode 100644include/linux/omap3isp.hcreate mode 100644include/linux/v4l2-mediabus.hcreate mode 100644include/linux/v4l2-subdev.hcreate mode 100644include/media/media-device.hcreate mode 100644include/media/media-devnode.hcreate mode 100644include/media/media-entity.h_______________________________________________ yocto mailing list [email protected]
https://lists.yoctoproject.org/listinfo/yocto
Signature · 3 lines
Darren Hart Intel Open Source Technology Center Yocto Project - Linux Kernel
Op 18 jun 2011, om 17:08 heeft Darren Hart het volgende geschreven:
Quoted 35 lines · Koen Kooi
Quoted 19 lines
Op 18 jun 2011, om 01:18 heeft Darren Hart het volgende geschreven:
Quoted 8 lines
From: Darren Hart <[email protected]>
The following commits have been pulled in from the meta-ti linux-omap_2.6.37 recipe, with the exception of: USB: ehci: remove structure packing from
ehci_defwhich hails from mainline and should be applied to yocto/base, while the rest should be applied to yocto/standard/beagleboard.Quoted 6 lines
Fixes [YOCTO #764] Fixes [YOCTO #765] Fixes [YOCTO #767]
This brings linux-yocto in sync with the meta-ti linux-omap_2.6.37 recipe and significantly improves Beagleboard support in linux-yocto. As there are 115 patches in total, and none of them are new, I have omitted them from the email.
Quoted 3 lines
You seem to be including the patches that patch the kernel from 37rc7 (or rc8, I forget) to .37 final, which shouldn't apply. So basically leave out the patches in the 'linus' directory.
There were about 200 patches in total, I've removed all those that reverse applied and failed do to a conflict that was obviously a merge of a very similar patch. That accounted for most of the 37-rc[78] to 37 patches from the linus directory.
Quoted 3 lines
The camera
interface also doesn't work, so the 'media' directory can be left out as well.
Quoted 5 lines
The goal was to stay as close to the meta-ti/linux-omap_2.6.37 recipe as possible with the linux-yocto kernel repository. Will you be removing all of the media directory from there as well? I don't want to remove them from here if you'll be *adding* to them there. However, if you'll be sure to just be replacing them there, then I can drop them here.
The .37 isn't used, developed or supported for beagleboard anymore, .39 is all the rage now :)
Op 18 jun 2011, om 17:10 heeft Koen Kooi het volgende geschreven:
Quoted 38 lines
Op 18 jun 2011, om 17:08 heeft Darren Hart het volgende geschreven:
Quoted 35 lines · Koen Kooi
Quoted 19 lines
Op 18 jun 2011, om 01:18 heeft Darren Hart het volgende geschreven:
Quoted 8 lines
From: Darren Hart <[email protected]>
The following commits have been pulled in from the meta-ti linux-omap_2.6.37 recipe, with the exception of: USB: ehci: remove structure packing from
ehci_defwhich hails from mainline and should be applied to yocto/base, while the rest should be applied to yocto/standard/beagleboard.Quoted 6 lines
Fixes [YOCTO #764] Fixes [YOCTO #765] Fixes [YOCTO #767]
This brings linux-yocto in sync with the meta-ti linux-omap_2.6.37 recipe and significantly improves Beagleboard support in linux-yocto. As there are 115 patches in total, and none of them are new, I have omitted them from the email.
Quoted 3 lines
You seem to be including the patches that patch the kernel from 37rc7 (or rc8, I forget) to .37 final, which shouldn't apply. So basically leave out the patches in the 'linus' directory.
There were about 200 patches in total, I've removed all those that reverse applied and failed do to a conflict that was obviously a merge of a very similar patch. That accounted for most of the 37-rc[78] to 37 patches from the linus directory.
Quoted 3 lines
The camera
interface also doesn't work, so the 'media' directory can be left out as well.
Quoted 7 lines
Quoted 5 lines
The goal was to stay as close to the meta-ti/linux-omap_2.6.37 recipe as possible with the linux-yocto kernel repository. Will you be removing all of the media directory from there as well? I don't want to remove them from here if you'll be *adding* to them there. However, if you'll be sure to just be replacing them there, then I can drop them here.
The .37 isn't used, developed or supported for beagleboard anymore, .39 is all the rage now :)
Speaking of .39, is there a 'linux-yocto' type of tree for .39 mainline with a skeleton for machine support? If there is, I'd like to fork it to see if it can improve my current workflow which consist of self written scripts that emulate guilt.
Quoted 47 lines · Koen Kooi
Op 18 jun 2011, om 17:10 heeft Koen Kooi het volgende geschreven:
Quoted 44 lines
Op 18 jun 2011, om 17:08 heeft Darren Hart het volgende geschreven:
Quoted 40 lines · Koen Kooi
Quoted 19 lines
Op 18 jun 2011, om 01:18 heeft Darren Hart het volgende geschreven:
Quoted 8 lines
From: Darren Hart<[email protected]>
The following commits have been pulled in from the meta-ti linux-omap_2.6.37 recipe, with the exception of: USB: ehci: remove structure packing from
ehci_defwhich hails from mainline and should be applied to yocto/base, while the rest should be applied to yocto/standard/beagleboard.Quoted 6 lines
Fixes [YOCTO #764] Fixes [YOCTO #765] Fixes [YOCTO #767]
This brings linux-yocto in sync with the meta-ti linux-omap_2.6.37 recipe and significantly improves Beagleboard support in linux-yocto. As there are 115 patches in total, and none of them are new, I have omitted them from the email.
Quoted 3 lines
You seem to be including the patches that patch the kernel from 37rc7 (or rc8, I forget) to .37 final, which shouldn't apply. So basically leave out the patches in the 'linus' directory.
There were about 200 patches in total, I've removed all those that reverse applied and failed do to a conflict that was obviously a merge of a very similar patch. That accounted for most of the 37-rc[78] to 37 patches from the linus directory.
Quoted 3 lines
The camera
interface also doesn't work, so the 'media' directory can be left out as well.The goal was to stay as close to the meta-ti/linux-omap_2.6.37 recipe as possible with the linux-yocto kernel repository. Will you be removing all of the media directory from there as well? I don't want to remove them from here if you'll be *adding* to them there. However, if you'll be sure to just be replacing them there, then I can drop them here.
Quoted 3 lines
Quoted 1 line
The .37 isn't used, developed or supported for beagleboard anymore, .39 is all the rage now :)
Speaking of .39, is there a 'linux-yocto' type of tree for .39 mainline with a skeleton for machine support? If there is, I'd like to fork it to see if it can improve my current workflow which consist of self written scripts that emulate guilt.
I've got the linux-yocto-dev recipe in poky-extras, meta-kernel-dev layer. That recipe tracked 2.6.39, and has now jumped to 3.0 (with a minor cheat as I work through the 3.0 naming issues). The kernel repo is hosted on git.yoctoproject.org as the linux-yocto-dev repo.
The repo is fast forward for a given version, and then is re-generated when I jump it from version to version. I carry forward all the existing patches and keep the qemu machines working. Although at the moment, qemuppc is losing interrupts and can't get past init :)
That's also the repo where I'm testing out some changes to kern-tools (but they are stable), which will show up shortly.
Cheers,
Bruce
Quoted 1 line
Op 18 jun 2011, om 18:09 heeft Bruce Ashfield het volgende geschreven:
Quoted 57 lines · Koen Kooi
Quoted 47 lines
Op 18 jun 2011, om 17:10 heeft Koen Kooi het volgende geschreven:
Quoted 44 lines
Op 18 jun 2011, om 17:08 heeft Darren Hart het volgende geschreven:
Quoted 40 lines · Koen Kooi
Quoted 19 lines
Op 18 jun 2011, om 01:18 heeft Darren Hart het volgende geschreven:
Quoted 8 lines
From: Darren Hart<[email protected]>
The following commits have been pulled in from the meta-ti linux-omap_2.6.37 recipe, with the exception of: USB: ehci: remove structure packing from
ehci_defwhich hails from mainline and should be applied to yocto/base, while the rest should be applied to yocto/standard/beagleboard.Quoted 6 lines
Fixes [YOCTO #764] Fixes [YOCTO #765] Fixes [YOCTO #767]
This brings linux-yocto in sync with the meta-ti linux-omap_2.6.37 recipe and significantly improves Beagleboard support in linux-yocto. As there are 115 patches in total, and none of them are new, I have omitted them from the email.
Quoted 3 lines
You seem to be including the patches that patch the kernel from 37rc7 (or rc8, I forget) to .37 final, which shouldn't apply. So basically leave out the patches in the 'linus' directory.
There were about 200 patches in total, I've removed all those that reverse applied and failed do to a conflict that was obviously a merge of a very similar patch. That accounted for most of the 37-rc[78] to 37 patches from the linus directory.
Quoted 3 lines
The camera
interface also doesn't work, so the 'media' directory can be left out as well.The goal was to stay as close to the meta-ti/linux-omap_2.6.37 recipe as possible with the linux-yocto kernel repository. Will you be removing all of the media directory from there as well? I don't want to remove them from here if you'll be *adding* to them there. However, if you'll be sure to just be replacing them there, then I can drop them here.
Quoted 3 lines
Quoted 1 line
The .37 isn't used, developed or supported for beagleboard anymore, .39 is all the rage now :)
Speaking of .39, is there a 'linux-yocto' type of tree for .39 mainline with a skeleton for machine support? If there is, I'd like to fork it to see if it can improve my current workflow which consist of self written scripts that emulate guilt.
I've got the linux-yocto-dev recipe in poky-extras, meta-kernel-dev layer. That recipe tracked 2.6.39, and has now jumped to 3.0 (with a minor cheat as I work through the 3.0 naming issues). The kernel repo is hosted on git.yoctoproject.org as the linux-yocto-dev repo.
Quoted 7 lines
The repo is fast forward for a given version, and then is re-generated when I jump it from version to version. I carry forward all the existing patches and keep the qemu machines working. Although at the moment, qemuppc is losing interrupts and can't get past init :)
That's also the repo where I'm testing out some changes to kern-tools (but they are stable), which will show up shortly.
Thanks, I'll have a look at that. Is there already some doc out on how to create such a structure from scratch?
Quoted 65 lines · Koen Kooi
Op 18 jun 2011, om 18:09 heeft Bruce Ashfield het volgende geschreven:
Quoted 62 lines · Koen Kooi
Quoted 47 lines
Op 18 jun 2011, om 17:10 heeft Koen Kooi het volgende geschreven:
Quoted 44 lines
Op 18 jun 2011, om 17:08 heeft Darren Hart het volgende geschreven:
Quoted 40 lines · Koen Kooi
Quoted 19 lines
Op 18 jun 2011, om 01:18 heeft Darren Hart het volgende geschreven:
Quoted 8 lines
From: Darren Hart<[email protected]>
The following commits have been pulled in from the meta-ti linux-omap_2.6.37 recipe, with the exception of: USB: ehci: remove structure packing from
ehci_defwhich hails from mainline and should be applied to yocto/base, while the rest should be applied to yocto/standard/beagleboard.Quoted 6 lines
Fixes [YOCTO #764] Fixes [YOCTO #765] Fixes [YOCTO #767]
This brings linux-yocto in sync with the meta-ti linux-omap_2.6.37 recipe and significantly improves Beagleboard support in linux-yocto. As there are 115 patches in total, and none of them are new, I have omitted them from the email.
Quoted 3 lines
You seem to be including the patches that patch the kernel from 37rc7 (or rc8, I forget) to .37 final, which shouldn't apply. So basically leave out the patches in the 'linus' directory.
There were about 200 patches in total, I've removed all those that reverse applied and failed do to a conflict that was obviously a merge of a very similar patch. That accounted for most of the 37-rc[78] to 37 patches from the linus directory.
Quoted 3 lines
The camera
interface also doesn't work, so the 'media' directory can be left out as well.The goal was to stay as close to the meta-ti/linux-omap_2.6.37 recipe as possible with the linux-yocto kernel repository. Will you be removing all of the media directory from there as well? I don't want to remove them from here if you'll be *adding* to them there. However, if you'll be sure to just be replacing them there, then I can drop them here.
Quoted 3 lines
Quoted 1 line
The .37 isn't used, developed or supported for beagleboard anymore, .39 is all the rage now :)
Speaking of .39, is there a 'linux-yocto' type of tree for .39 mainline with a skeleton for machine support? If there is, I'd like to fork it to see if it can improve my current workflow which consist of self written scripts that emulate guilt.
I've got the linux-yocto-dev recipe in poky-extras, meta-kernel-dev layer. That recipe tracked 2.6.39, and has now jumped to 3.0 (with a minor cheat as I work through the 3.0 naming issues). The kernel repo is hosted on git.yoctoproject.org as the linux-yocto-dev repo.
The repo is fast forward for a given version, and then is re-generated when I jump it from version to version. I carry forward all the existing patches and keep the qemu machines working. Although at the moment, qemuppc is losing interrupts and can't get past init :)
Quoted 4 lines
Quoted 2 lines
That's also the repo where I'm testing out some changes to kern-tools (but they are stable), which will show up shortly.
Thanks, I'll have a look at that. Is there already some doc out on how to create such a structure from scratch?
At the moment, they are carried forward from kernel version to kernel version and then interpreted by the tools. But I do have some notes and other information that describe how to take upstream tree <foo>, feed it a kernel-cache (what you see in the meta branch) and create a new kernel tree ready to build.
I've got to get a bit of 3.0-rcX behind me, but I'm writing this up and will contribute it, if that's what you are thinking of here.
Cheers,
Bruce
Op 20 jun 2011, om 21:46 heeft Bruce Ashfield het volgende geschreven:
Quoted 78 lines · Koen Kooi
Quoted 65 lines
Op 18 jun 2011, om 18:09 heeft Bruce Ashfield het volgende geschreven:
Quoted 62 lines · Koen Kooi
Quoted 47 lines
Op 18 jun 2011, om 17:10 heeft Koen Kooi het volgende geschreven:
Quoted 44 lines
Op 18 jun 2011, om 17:08 heeft Darren Hart het volgende geschreven:
Quoted 40 lines · Koen Kooi
Quoted 19 lines
Op 18 jun 2011, om 01:18 heeft Darren Hart het volgende geschreven:
Quoted 8 lines
From: Darren Hart<[email protected]>
The following commits have been pulled in from the meta-ti linux-omap_2.6.37 recipe, with the exception of: USB: ehci: remove structure packing from
ehci_defwhich hails from mainline and should be applied to yocto/base, while the rest should be applied to yocto/standard/beagleboard.Quoted 6 lines
Fixes [YOCTO #764] Fixes [YOCTO #765] Fixes [YOCTO #767]
This brings linux-yocto in sync with the meta-ti linux-omap_2.6.37 recipe and significantly improves Beagleboard support in linux-yocto. As there are 115 patches in total, and none of them are new, I have omitted them from the email.
Quoted 3 lines
You seem to be including the patches that patch the kernel from 37rc7 (or rc8, I forget) to .37 final, which shouldn't apply. So basically leave out the patches in the 'linus' directory.
There were about 200 patches in total, I've removed all those that reverse applied and failed do to a conflict that was obviously a merge of a very similar patch. That accounted for most of the 37-rc[78] to 37 patches from the linus directory.
Quoted 3 lines
The camera
interface also doesn't work, so the 'media' directory can be left out as well.The goal was to stay as close to the meta-ti/linux-omap_2.6.37 recipe as possible with the linux-yocto kernel repository. Will you be removing all of the media directory from there as well? I don't want to remove them from here if you'll be *adding* to them there. However, if you'll be sure to just be replacing them there, then I can drop them here.
Quoted 3 lines
Quoted 1 line
The .37 isn't used, developed or supported for beagleboard anymore, .39 is all the rage now :)
Speaking of .39, is there a 'linux-yocto' type of tree for .39 mainline with a skeleton for machine support? If there is, I'd like to fork it to see if it can improve my current workflow which consist of self written scripts that emulate guilt.
I've got the linux-yocto-dev recipe in poky-extras, meta-kernel-dev layer. That recipe tracked 2.6.39, and has now jumped to 3.0 (with a minor cheat as I work through the 3.0 naming issues). The kernel repo is hosted on git.yoctoproject.org as the linux-yocto-dev repo.
The repo is fast forward for a given version, and then is re-generated when I jump it from version to version. I carry forward all the existing patches and keep the qemu machines working. Although at the moment, qemuppc is losing interrupts and can't get past init :)
Quoted 4 lines
Quoted 2 lines
That's also the repo where I'm testing out some changes to kern-tools (but they are stable), which will show up shortly.
Thanks, I'll have a look at that. Is there already some doc out on how to create such a structure from scratch?
At the moment, they are carried forward from kernel version to kernel version and then interpreted by the tools. But I do have some notes and other information that describe how to take upstream tree <foo>, feed it a kernel-cache (what you see in the meta branch) and create a new kernel tree ready to build.
Quoted 3 lines
I've got to get a bit of 3.0-rcX behind me, but I'm writing this up and will contribute it, if that's what you are thinking of here.
That's exactly what I'm thinking of!