sh: fix compile error using sh7757lcr_defconfig

PATCH In review Yoshihiro Shimoda 2 participants 2 messages Jun 21, 2011 SuperH

lore

Share & tools

lore

Yoshihiro Shimoda

author

2011-06-21 08:03 UTC #0 lore raw

PATCH 1/1 sh: fix compile error using sh7757lcr_defconfig

Fix the complie error in ehci-hcd.c because it needs an additional configuration.

CC drivers/usb/host/ehci-hcd.o
drivers/usb/host/ehci-hcd.c:1288:2: error: #error "missing bus glue for ehci-hcd" make[3]: *** [drivers/usb/host/ehci-hcd.o] Error 1
make[2]: *** [drivers/usb/host] Error 2
make[1]: *** [drivers/usb] Error 2
make: *** [drivers] Error 2

Signed-off-by Yoshihiro Shimoda <[email protected]>

---
 arch/sh/configs/sh7757lcr_defconfig |    8 +++-----
 1 files changed, 3 insertions(+), 5 deletions(-)

arch/sh/configs/sh7757lcr_defconfig +3 -5

index 33ddb13..cfde98d 100644
@@ -9,7 +9,6 @@ CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
 CONFIG_LOG_BUF_SHIFT
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS_ALL=y
 CONFIG_SLAB=y

@@ -39,8 +38,6 @@ CONFIG_IPV6=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_M25P80=y

@@ -56,18 +53,19 @@ CONFIG_SH_ETH=y
 # CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=3
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_SPI=y
 CONFIG_SPI_SH=y
 # CONFIG_HWMON is not set
-CONFIG_MFD_SH_MOBILE_SDHI=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_SH=y
 CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_SH=y
 CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHI=y

Signature · 1 line

1.7.1

Paul Mundt

2011-06-21 08:46 UTC #1 lore raw

Quoted 11 lines · Yoshihiro Shimoda

Fix the complie error in ehci-hcd.c because it needs an additional configuration.
CC drivers/usb/host/ehci-hcd.o
drivers/usb/host/ehci-hcd.c:1288:2: error: #error "missing bus glue for ehci-hcd" make[3]: *** [drivers/usb/host/ehci-hcd.o] Error 1
make[2]: *** [drivers/usb/host] Error 2
make[1]: *** [drivers/usb] Error 2
make: *** [drivers] Error 2
Signed-off-by Yoshihiro Shimoda <[email protected]>

Quoted 5 lines · Yoshihiro Shimoda

Signed-off-by Yoshihiro Shimoda <[email protected]>

---
 arch/sh/kernel/cpu/sh4a/setup-sh7757.c |   50 ++++++++++++++++++++++++++++++++
 1 files changed, 50 insertions(+), 0 deletions(-)

Both applied, thanks.