arm: Update jadecpu board
PATCH 1/1 arm: Update jadecpu board
Enable dcache and arch memset/memcpy for speed reasons Remove of config.mk and some environment overwrites Some generic cleanup
--- board/syteco/jadecpu/config.mk | 1 - board/syteco/jadecpu/jadecpu.c | 5 +---- include/configs/jadecpu.h | 24 +++++++++++++++--------- 3 files changed, 16 insertions(+), 14 deletions(-) delete mode 100644 board/syteco/jadecpu/config.mk
board/syteco/jadecpu/config.mk deleted +0 -1
@@ -1 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x10000000
board/syteco/jadecpu/jadecpu.c +1 -4
@@ -44,6 +44,7 @@ int board_init(void) gd->bd->bi_boot_params =PHYS_SDRAM +PHYS_SDRAM_SIZE -0x10000 ;icache_enable (); +dcache_enable ();return 0 ; }
@@ -125,9 +126,6 @@ int board_late_init(void)setenv ("preboot" ,"run gs_slow_boot" ); }else if ((in_word &0xC0 ) !=0 ) {setenv ("stdout" ,"vga" ); -setenv ("gs_bootcmd" ,"mw.l 0x40000000 0 1024; usb start;" -"fatls usb 0; fatload usb 0 0x40000000 mcq5resq.bin;" -"bootelf 0x40000000; bootelf 0x10080000" );setenv ("preboot" ,"run gs_slow_boot" ); }else {setenv ("stdin" ,"serial" );
@@ -136,7 +134,6 @@ int board_late_init(void)if (getenv ("gs_devel" )) {setenv ("preboot" ,"run gs_slow_boot" ); }else { -setenv ("gs_bootcmd" ,"bootelf 0x10080000" );setenv ("preboot" ,"run gs_fast_boot" ); } }
include/configs/jadecpu.h +15 -9
@@ -29,17 +29,21 @@#define CONFIG_MB86R0x#define CONFIG_MB86R0x_IOCLK get_bus_freq(0)#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_TEXT_BASE 0x10000000#define CONFIG_ARM926EJS 1/* This is an ARM926EJS Core */ #undef CONFIG_USE_IRQ/* we don't need IRQ/FIQ stuff */ +#define CONFIG_USE_ARCH_MEMCPY +#define CONFIG_USE_ARCH_MEMSET +/* * Environment settings */ #define CONFIG_EXTRA_ENV_SETTINGS \ "gs_fast_boot=setenv bootdelay 5\0" \ "gs_slow_boot=setenv bootdelay 10\0" \ - "bootcmd=mw.l 0x40000000 0 1024; usb start;" \ + "bootcmd=dcache off; mw.l 0x40000000 0 1024; usb start;" \ "fatls usb 0; fatload usb 0 0x40000000 jadecpu-init.bin;" \ "bootelf 0x40000000\0" \ ""
@@ -122,13 +126,14 @@#undef CONFIG_CMD_NFS#undef CONFIG_CMD_XIMG -#define CONFIG_CMD_BMP 1 -#define CONFIG_CMD_CAN 1 -#define CONFIG_CMD_DHCP 1 -#define CONFIG_CMD_ELF 1 -#define CONFIG_CMD_FAT 1 -#define CONFIG_CMD_PING 1 -#define CONFIG_CMD_USB 1 +#define CONFIG_CMD_BMP +#define CONFIG_CMD_CAN +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_PING +#define CONFIG_CMD_USB +#define CONFIG_CMD_CACHE #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
@@ -196,7 +201,8 @@/* * Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (0x400000 - 0x8000) +#define CONFIG_SYS_MALLOC_LEN (10 << 20) +#define CONFIG_SYS_MEM_TOP_HIDE (4 << 20)#define CONFIG_STACKSIZE (32*1024)/* regular stack */
Signature · 1 line
1.7.0.4
PATCH 1/1 arm: Update jadecpu board
Le 29/06/2011 14:08, Matthias Weisser a ?crit :
Quoted 5 lines
Enable dcache and arch memset/memcpy for speed reasons Remove of config.mk and some environment overwrites Some generic cleanup
Signed-off-by Matthias Weisser<[email protected]>
Hi Matthias,
I assume this has been tested?
Amicalement,
Signature · 1 line
Albert.
PATCH 1/1 arm: Update jadecpu board
Am 29.06.2011 19:56, schrieb Albert ARIBAUD:
Quoted 10 lines
Le 29/06/2011 14:08, Matthias Weisser a ?crit :
Quoted 5 lines
Enable dcache and arch memset/memcpy for speed reasons Remove of config.mk and some environment overwrites Some generic cleanup
Signed-off-by Matthias Weisser<[email protected]>Hi Matthias,
I assume this has been tested?
Sure. Build and runtime tested.
Matthias
PATCH 1/1 arm: Update jadecpu board
In reply to Matthias WeisserHi Matthias,
Le 29/06/2011 14:08, Matthias Weisser a ?crit :
Quoted 11 lines
Enable dcache and arch memset/memcpy for speed reasons Remove of config.mk and some environment overwrites Some generic cleanup
Signed-off-by Matthias Weisser<[email protected]>--- board/syteco/jadecpu/config.mk | 1 - board/syteco/jadecpu/jadecpu.c | 5 +---- include/configs/jadecpu.h | 24 +++++++++++++++--------- 3 files changed, 16 insertions(+), 14 deletions(-)delete mode 100644
board/syteco/jadecpu/config.mk
Applied to u-boot-arm/master, thanks.
Amicalement,
Signature · 1 line
Albert.