avr32: add grasshopper (ICnova AP7000) board

PATCH Superseded Andreas Bießmann 4 participants 12 messages Jun 28, 2011 – Jul 24, 2011

Share & tools

Andreas Bießmann

author

2011-06-28 13:14 UTC #0 lore raw

PATCH 1/1 avr32: add grasshopper (ICnova AP7000) board

The grasshopper board is a neat avr32 evaluation kit produced by In-Circuit GmbH.
See http://www.ic-board.de/product_info.php?info=p75_ICnova-AP7000-Base.html
for detailed information about this device.

Signed-off-by Andreas Bie?mann <[email protected]>

---
 board/in-circuit/grasshopper/Makefile      |   45 +++++++
 board/in-circuit/grasshopper/grasshopper.c |  105 +++++++++++++++
 boards.cfg                                 |    1 +
 include/configs/grasshopper.h              |  197 ++++++++++++++++++++++++++++
 4 files changed, 348 insertions(+), 0 deletions(-)
 create mode 100644 board/in-circuit/grasshopper/Makefile
 create mode 100644 board/in-circuit/grasshopper/grasshopper.c
 create mode 100644 include/configs/grasshopper.h

board/in-circuit/grasshopper/Makefile new file +45 -0

new file mode 100644
index 0000000..a6c36c7
@@ -0,0 +1,45 @@
+#
+# (C) Copyright 2001-2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# Copyright (C) 2011
+# Corscience GmbH & Co.KG, Andreas Bie?mann <[email protected]>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+include $(TOPDIR)/config.mk
+
+LIB     := $(obj)lib$(BOARD).o
+
+COBJS-y += $(BOARD).o
+
+SRCS    := $(COBJS-y:.o=.c)
+OBJS    := $(addprefix $(obj),$(COBJS-y))
+
+$(LIB): $(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

board/in-circuit/grasshopper/grasshopper.c new file +105 -0

105 lines not on this page · raw message

boards.cfg +1 -0

index dfefc3f..839441a 100644
@@ -209,6 +209,7 @@ atstk1003                    avr32       at32ap      atstk1000           atmel
 atstk1004                    avr32       at32ap      atstk1000           atmel          at32ap700x
 atstk1006                    avr32       at32ap      atstk1000           atmel          at32ap700x
 favr-32-ezkit                avr32       at32ap      -                   earthlcd       at32ap700x
+grasshopper                  avr32       at32ap      -                   in-circuit     at32ap700x
 mimc200                      avr32       at32ap      -                   mimc           at32ap700x
 hammerhead                   avr32       at32ap      -                   miromico       at32ap700x
 bct-brettl2                  blackfin    blackfin

include/configs/grasshopper.h new file +197 -0

197 lines not on this page · raw message

Signature · 1 line

1.7.2.5

Reinhard Meyer

2011-06-30 08:36 UTC #1 lore raw

PATCH 1/1 avr32: add grasshopper (ICnova AP7000) board

Dear Andreas Bie?mann,

Quoted 23 lines

The grasshopper board is a neat avr32 evaluation kit produced by In-Circuit GmbH.
...

board/in-circuit/grasshopper/grasshopper.c new file +20 -0

+struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = {
+    {
+        .virt_pgno  = CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT,
+        .nr_pages   = CONFIG_SYS_FLASH_SIZE >> PAGE_SHIFT,
+        .phys       = (CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT)
+                    | MMU_VMR_CACHE_NONE,
+    }, {
+        .virt_pgno  = CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT,
+        .nr_pages   = EBI_SDRAM_SIZE >> PAGE_SHIFT,
+        .phys       = (CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT)
+                    | MMU_VMR_CACHE_WRBACK,
+    },
+};
+
+static const struct sdram_config sdram_config = {
+    /* Dual MT48LC16M16A2-7E (or equal) */
+    .data_bits      = SDRAM_DATA_32BIT,
+    .row_bits       = 13,
+    .col_bits       = 9,
+    .bank_bits      = 2,

board/in-circuit/grasshopper/grasshopper.c line 64

Quoted 10 lines

board/in-circuit/grasshopper/grasshopper.c new file +10 -0

+    .cas            = 2,
+    .twr            = 2,
+    .trc            = 7,
+    .trp            = 2,
+    .trcd           = 2,
+    .tras           = 4,
+    .txsr           = 7,
+    /* 7.81 us */
+    .refresh_period = (781 * (SDRAMC_BUS_HZ / 1000)) / 100000,
+};

This patch is infested with 4/8 space indentations. Please fix to use tabs...

Best Regards,
Reinhard

Andreas Bießmann

author

2011-06-30 10:03 UTC #2 lore raw

PATCH v2 1/1 avr32: add grasshopper (ICnova AP7000) board

In reply to Andreas Bießmann

Signed-off-by Andreas Bie?mann <[email protected]>

---
changes since v1:
- use vim: set noet ts=8 for 80 char per line checking
- replace blank indention by tab indention
- add board_early_init_r to explicitely set the phy address to 0x00

 board/in-circuit/grasshopper/Makefile      |   45 +++++++
 board/in-circuit/grasshopper/grasshopper.c |  112 ++++++++++++++++
 boards.cfg                                 |    1 +
 include/configs/grasshopper.h              |  198 ++++++++++++++++++++++++++++
 4 files changed, 356 insertions(+), 0 deletions(-)
 create mode 100644 board/in-circuit/grasshopper/Makefile
 create mode 100644 board/in-circuit/grasshopper/grasshopper.c
 create mode 100644 include/configs/grasshopper.h

board/in-circuit/grasshopper/Makefile new file +45 -0

new file mode 100644
index 0000000..a6c36c7
@@ -0,0 +1,45 @@
+#
+# (C) Copyright 2001-2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# Copyright (C) 2011
+# Corscience GmbH & Co.KG, Andreas Bie?mann <[email protected]>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+include $(TOPDIR)/config.mk
+
+LIB     := $(obj)lib$(BOARD).o
+
+COBJS-y += $(BOARD).o
+
+SRCS    := $(COBJS-y:.o=.c)
+OBJS    := $(addprefix $(obj),$(COBJS-y))
+
+$(LIB): $(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

board/in-circuit/grasshopper/grasshopper.c new file +112 -0

112 lines not on this page · raw message

boards.cfg +1 -0

index dfefc3f..839441a 100644
@@ -209,6 +209,7 @@ atstk1003                    avr32       at32ap      atstk1000           atmel
 atstk1004                    avr32       at32ap      atstk1000           atmel          at32ap700x
 atstk1006                    avr32       at32ap      atstk1000           atmel          at32ap700x
 favr-32-ezkit                avr32       at32ap      -                   earthlcd       at32ap700x
+grasshopper                  avr32       at32ap      -                   in-circuit     at32ap700x
 mimc200                      avr32       at32ap      -                   mimc           at32ap700x
 hammerhead                   avr32       at32ap      -                   miromico       at32ap700x
 bct-brettl2                  blackfin    blackfin

include/configs/grasshopper.h new file +198 -0

198 lines not on this page · raw message

Signature · 1 line

1.7.2.5

Andreas Bießmann

author

2011-07-01 08:03 UTC #3 lore raw

v3 cover Add grasshopper board (and modify MAINTIANERS)

This is now a series of two cause changing MAINTAINERS give an mismatch of charsets (ISO-8859-1 vs UTF-8).

There is an discussion about changing charset in files:
http://article.gmane.org/gmane.comp.boot-loaders.u-boot/102199

Andreas Bie?mann (2):
MAINTAINERS: convert to UTF-8
avr32: add grasshopper (ICnova AP7000) board

 MAINTAINERS                                |   11 +-
 board/in-circuit/grasshopper/Makefile      |   45 +++++++
 board/in-circuit/grasshopper/grasshopper.c |  112 ++++++++++++++++
 boards.cfg                                 |    1 +
 include/configs/grasshopper.h              |  198 ++++++++++++++++++++++++++++
 5 files changed, 362 insertions(+), 5 deletions(-)
 create mode 100644 board/in-circuit/grasshopper/Makefile
 create mode 100644 board/in-circuit/grasshopper/grasshopper.c
 create mode 100644 include/configs/grasshopper.h

Signature · 1 line

1.7.2.5

Andreas Bießmann

author

2011-07-01 08:03 UTC #4 lore raw

PATCH v3 1/2 MAINTAINERS: convert to UTF-8

In reply to Andreas Bießmann

Signed-off-by Andreas Bie??mann <[email protected]>

CC albert.u.boot at aribaud.net

CC vapier at gentoo.org

---
 MAINTAINERS |   10 +++++-----
 1 files changed, 5 insertions(+), 5 deletions(-)

MAINTAINERS +5 -5

index 2bba7b4..fa77fd3 100644
@@ -74,7 +74,7 @@ Joe D'Abbraccio <[email protected]>
 
 	MPC837xERDB	MPC837x
 
-K?ri Dav??sson <[email protected]>
+K??ri Dav????sson <[email protected]>
 
 	FLAGADM		MPC823

@@ -597,7 +597,7 @@ Rishi Bhattacharya <[email protected]>
 
 	omap5912osk	ARM926EJS
 
-Andreas Bie?mann <[email protected]>
+Andreas Bie??mann <[email protected]>
 
 	at91rm9200ek	at91rm9200

@@ -652,7 +652,7 @@ Sedji Gaouaou<[email protected]>
 	at91sam9g10ek		ARM926EJS (AT91SAM9G10 SoC)
 	at91sam9m10g45ek	ARM926EJS (AT91SAM9G45 SoC)
 
-Marius Gr?ger <[email protected]>
+Marius Gr??ger <[email protected]>
 
 	impa7		ARM720T (EP7211)
 	ep7312		ARM720T (EP7312)

@@ -735,7 +735,7 @@ Nishanth Menon <[email protected]>
 	omap3_sdp3430	ARM ARMV7 (OMAP3xx SoC)
 	omap3_zoom1	ARM ARMV7 (OMAP3xx SoC)
 
-David M?ller <[email protected]>
+David M??ller <[email protected]>
 
 	smdk2410	ARM920T
 	VCMA9		ARM920T

@@ -897,7 +897,7 @@ Richard Woodruff <[email protected]>
 
 	omap2420h4	ARM1136EJS
 
-Alex Z?pke <[email protected]>
+Alex Z??pke <[email protected]>
 
 	lart		SA1100
 	dnp1110		SA1110

Signature · 1 line

1.7.2.5

Albert ARIBAUD

2011-07-01 11:09 UTC #5 lore raw

PATCH v3 1/2 MAINTAINERS: convert to UTF-8

Le 01/07/2011 10:03, Andreas Bie?mann a ?crit :

Quoted 48 lines

Signed-off-by Andreas Bie?mann<[email protected]>

CC albert.u.boot at aribaud.net

CC vapier at gentoo.org

---
  MAINTAINERS |   10 +++++-----
  1 files changed, 5 insertions(+), 5 deletions(-)

MAINTAINERS +4 -4

index 2bba7b4..fa77fd3 100644
@@ -74,7 +74,7 @@ Joe D'Abbraccio<[email protected]>
 
  	MPC837xERDB	MPC837x
 
-K?ri Dav??sson<[email protected]>
+K?ri Dav??sson<[email protected]>
 
  	FLAGADM		MPC823

@@ -597,7 +597,7 @@ Rishi Bhattacharya<[email protected]>
 
  	omap5912osk	ARM926EJS
 
-Andreas Bie?mann<[email protected]>
+Andreas Bie?mann<[email protected]>
 
  	at91rm9200ek	at91rm9200

@@ -652,7 +652,7 @@ Sedji Gaouaou<[email protected]>
  	at91sam9g10ek		ARM926EJS (AT91SAM9G10 SoC)
  	at91sam9m10g45ek	ARM926EJS (AT91SAM9G45 SoC)
 
-Marius Gr?ger<[email protected]>
+Marius Gr?ger<[email protected]>
 
  	impa7		ARM720T (EP7211)
  	ep7312		ARM720T (EP7312)

@@ -735,7 +735,7 @@ Nishanth Menon<[email protected]>
  	omap3_sdp3430	ARM ARMV7 (OMAP3xx SoC)
  	omap3_zoom1	ARM ARMV7 (OMAP3xx SoC)
 
-David M?ller<[email protected]>
+David M?ller<[email protected]>
 
  	smdk2410	ARM920T
  	VCMA9		ARM920T

MAINTAINERS Richard Woodruff<[email protected]> · line 903

Quoted 8 lines

MAINTAINERS +1 -1

@@ -897,7 +897,7 @@ Richard Woodruff<[email protected]>
 
  	omap2420h4	ARM1136EJS
 
-Alex Z?pke<[email protected]>
+Alex Z?pke<[email protected]>
 
  	lart		SA1100
  	dnp1110		SA1110

Andreas,

Please do not issue a single file encoding conversion, and do not submit a conversion patch to UTF before agreement is reached on which encoding to use.

As for the full change, if you really insist on doing it, then you're welcome, but as I am the one who raised the subject, I feel it is only normal that I prepare and submit the overall change patch.

Amicalement,

Signature · 1 line

Albert.

Andreas Bießmann

2011-07-01 11:24 UTC #6 lore raw

PATCH v3 1/2 MAINTAINERS: convert to UTF-8

Dear Albert Aribaud,

Am 01.07.2011 13:09, schrieb Albert ARIBAUD:

Quoted 1 line

Le 01/07/2011 10:03, Andreas Bie?mann a ?crit :

Quoted 5 lines

Andreas,
Please do not issue a single file encoding conversion, and do not submit a conversion patch to UTF before agreement is reached on which encoding to use.

I have no problem with that. I just remembered this morning that I missed an entry in MAINTAINERS file. But when I change the MAINTAINERS file in current encoding the whole patch gets another encoding. My SoB show's immediately the wrong encoding.
Therefore I thought it would be good point to show on that problem with that patch.
Will send v4 with UTF-8 conversion removed.

Quoted 3 lines

As for the full change, if you really insist on doing it, then you're welcome, but as I am the one who raised the subject, I feel it is only normal that I prepare and submit the overall change patch.

I do not insist on doing the conversion. There are some places where errors may occur, therefore it would be best someone with upstream repository does the job.

regards

Andreas Bie?mann

Andreas Bießmann

author

2011-07-01 14:47 UTC #7 lore raw

PATCH v4 1/1 avr32: add grasshopper (ICnova AP7000) board

In reply to Albert ARIBAUD

Signed-off-by Andreas Bie??mann <[email protected]>

---
changes since v1:
- use vim: set noet ts=8 for 80 char per line checking
- replace blank indention by tab indention
- add board_early_init_r to explicitely set the phy address to 0x00

changes since v2:
- add MAINTAINERS entry

chganges since v3:
- remove previous commit 'MAINTAINERS: convert to utf-8' -> encoding of this patch is defective since '?' in MAINTAINERS is ISO-8859-1 coded and everywhere else it is UTF-8 coded.

 MAINTAINERS                                |    1 +
 board/in-circuit/grasshopper/Makefile      |   45 +++++++
 board/in-circuit/grasshopper/grasshopper.c |  112 ++++++++++++++++
 boards.cfg                                 |    1 +
 include/configs/grasshopper.h              |  198 ++++++++++++++++++++++++++++
 5 files changed, 357 insertions(+), 0 deletions(-)
 create mode 100644 board/in-circuit/grasshopper/Makefile
 create mode 100644 board/in-circuit/grasshopper/grasshopper.c
 create mode 100644 include/configs/grasshopper.h

MAINTAINERS +1 -0

index 2bba7b4..9ead25d 100644
@@ -600,6 +600,7 @@ Rishi Bhattacharya <[email protected]>
 Andreas Bie?mann <[email protected]>
 
 	at91rm9200ek	at91rm9200
+	grasshopper		avr32
 
 Cliff Brake <[email protected]>

board/in-circuit/grasshopper/Makefile new file +45 -0

45 lines not on this page · raw message

board/in-circuit/grasshopper/grasshopper.c new file +112 -0

112 lines not on this page · raw message

boards.cfg +1 -0

index dfefc3f..839441a 100644
@@ -209,6 +209,7 @@ atstk1003                    avr32       at32ap      atstk1000           atmel
 atstk1004                    avr32       at32ap      atstk1000           atmel          at32ap700x
 atstk1006                    avr32       at32ap      atstk1000           atmel          at32ap700x
 favr-32-ezkit                avr32       at32ap      -                   earthlcd       at32ap700x
+grasshopper                  avr32       at32ap      -                   in-circuit     at32ap700x
 mimc200                      avr32       at32ap      -                   mimc           at32ap700x
 hammerhead                   avr32       at32ap      -                   miromico       at32ap700x
 bct-brettl2                  blackfin    blackfin

include/configs/grasshopper.h new file +198 -0

198 lines not on this page · raw message

Signature · 1 line

1.7.2.5

Andreas Bießmann

author

2011-07-18 10:14 UTC #8 lore raw

PATCH v4 1/1 avr32: add grasshopper (ICnova AP7000) board

Dear Reinahrd Meyer,

Am 01.07.2011 16:47, schrieb Andreas Bie?mann:

Quoted 12 lines

The grasshopper board is a neat avr32 evaluation kit produced by In-Circuit GmbH.
See http://www.ic-board.de/product_info.php?info=p75_ICnova-AP7000-Base.html
for detailed information about this device.
Signed-off-by Andreas Bie?mann <[email protected]>
---
changes since v1:
- use vim: set noet ts=8 for 80 char per line checking
- replace blank indention by tab indention
- add board_early_init_r to explicitely set the phy address to 0x00

Quoted 7 lines

changes since v2:
- add MAINTAINERS entry
chganges since v3:
- remove previous commit 'MAINTAINERS: convert to utf-8' -> encoding of this patch is defective since '?' in MAINTAINERS is ISO-8859-1 coded and everywhere else it is UTF-8 coded.

ping?

Andreas Bießmann

author

2011-07-21 16:22 UTC #9 lore raw

PATCH v4 1/1 avr32: add grasshopper (ICnova AP7000) board

In reply to Andreas Bießmann

Dear Reinhard Meyer,

you took the at91 related patches today.

Am 01.07.2011 16:47, schrieb Andreas Bie?mann:

Quoted 20 lines

The grasshopper board is a neat avr32 evaluation kit produced by In-Circuit GmbH.
See http://www.ic-board.de/product_info.php?info=p75_ICnova-AP7000-Base.html
for detailed information about this device.
Signed-off-by Andreas Bie?mann <[email protected]>
---
changes since v1:
- use vim: set noet ts=8 for 80 char per line checking
- replace blank indention by tab indention
- add board_early_init_r to explicitely set the phy address to 0x00
changes since v2:
- add MAINTAINERS entry
chganges since v3:
- remove previous commit 'MAINTAINERS: convert to utf-8' -> encoding of this patch is defective since '?' in MAINTAINERS is ISO-8859-1 coded and everywhere else it is UTF-8 coded.

Quoted 9 lines

 MAINTAINERS                                |    1 +
 board/in-circuit/grasshopper/Makefile      |   45 +++++++
 board/in-circuit/grasshopper/grasshopper.c |  112 ++++++++++++++++
 boards.cfg                                 |    1 +
 include/configs/grasshopper.h              |  198 ++++++++++++++++++++++++++++
 5 files changed, 357 insertions(+), 0 deletions(-)
 create mode 100644 board/in-circuit/grasshopper/Makefile
 create mode 100644 board/in-circuit/grasshopper/grasshopper.c
 create mode 100644 include/configs/grasshopper.h

Any objections to this patch? v4 was out before the merge window closed. I know you are right before your holiday ... but it would be great if you take this too.

best regards

Andreas Bie?mann

Reinhard Meyer

2011-07-24 09:58 UTC #10 lore raw

PATCH v4 1/1 avr32: add grasshopper (ICnova AP7000) board

Dear Andreas Bie?mann:

Quoted 31 lines

Am 01.07.2011 16:47, schrieb Andreas Bie?mann:
Quoted 20 lines
The grasshopper board is a neat avr32 evaluation kit produced by In-Circuit GmbH.
See http://www.ic-board.de/product_info.php?info=p75_ICnova-AP7000-Base.html
for detailed information about this device.
Signed-off-by Andreas Bie?mann <[email protected]>
---
changes since v1:
- use vim: set noet ts=8 for 80 char per line checking
- replace blank indention by tab indention
- add board_early_init_r to explicitely set the phy address to 0x00
changes since v2:
- add MAINTAINERS entry
chganges since v3:
- remove previous commit 'MAINTAINERS: convert to utf-8' -> encoding of this patch is defective since '?' in MAINTAINERS is ISO-8859-1 coded and everywhere else it is UTF-8 coded.
Quoted 9 lines
 MAINTAINERS                                |    1 +
 board/in-circuit/grasshopper/Makefile      |   45 +++++++
 board/in-circuit/grasshopper/grasshopper.c |  112 ++++++++++++++++
 boards.cfg                                 |    1 +
 include/configs/grasshopper.h              |  198 ++++++++++++++++++++++++++++
 5 files changed, 357 insertions(+), 0 deletions(-)
 create mode 100644 board/in-circuit/grasshopper/Makefile
 create mode 100644 board/in-circuit/grasshopper/grasshopper.c
 create mode 100644 include/configs/grasshopper.h

Quoted 3 lines

Any objections to this patch? v4 was out before the merge window closed. I know you are right before your holiday ... but it would be great if you take this too.

No objections. Applied to u-boot-atmel/master.
Thanks, Reinhard

Andreas Bießmann

author

2011-07-01 08:03 UTC #11 lore raw

PATCH v3 2/2 avr32: add grasshopper (ICnova AP7000) board

In reply to Andreas Bießmann

Signed-off-by Andreas Bie?mann <[email protected]>

---
changes since v1:
- use vim: set noet ts=8 for 80 char per line checking
- replace blank indention by tab indention
- add board_early_init_r to explicitely set the phy address to 0x00

changes since v2:
- add MAINTAINERS entry

 MAINTAINERS                                |    1 +
 board/in-circuit/grasshopper/Makefile      |   45 +++++++
 board/in-circuit/grasshopper/grasshopper.c |  112 ++++++++++++++++
 boards.cfg                                 |    1 +
 include/configs/grasshopper.h              |  198 ++++++++++++++++++++++++++++
 5 files changed, 357 insertions(+), 0 deletions(-)
 create mode 100644 board/in-circuit/grasshopper/Makefile
 create mode 100644 board/in-circuit/grasshopper/grasshopper.c
 create mode 100644 include/configs/grasshopper.h

MAINTAINERS +1 -0

index fa77fd3..2e6c3de 100644
@@ -600,6 +600,7 @@ Rishi Bhattacharya <[email protected]>
 Andreas Bie?mann <[email protected]>
 
 	at91rm9200ek	at91rm9200
+	grasshopper		avr32
 
 Cliff Brake <[email protected]>

board/in-circuit/grasshopper/Makefile new file +45 -0

45 lines not on this page · raw message

board/in-circuit/grasshopper/grasshopper.c new file +112 -0

112 lines not on this page · raw message

boards.cfg +1 -0

index dfefc3f..839441a 100644
@@ -209,6 +209,7 @@ atstk1003                    avr32       at32ap      atstk1000           atmel
 atstk1004                    avr32       at32ap      atstk1000           atmel          at32ap700x
 atstk1006                    avr32       at32ap      atstk1000           atmel          at32ap700x
 favr-32-ezkit                avr32       at32ap      -                   earthlcd       at32ap700x
+grasshopper                  avr32       at32ap      -                   in-circuit     at32ap700x
 mimc200                      avr32       at32ap      -                   mimc           at32ap700x
 hammerhead                   avr32       at32ap      -                   miromico       at32ap700x
 bct-brettl2                  blackfin    blackfin

include/configs/grasshopper.h new file +198 -0

198 lines not on this page · raw message

Signature · 1 line

1.7.2.5