Skip to contentSkip to conversation

mx27: Make the UART port number explicit

PATCH New Fabio Estevam 2 participants 2 messages Jul 1, 2011 – Jul 6, 2011

Subsystems (2)
Arm (32-bit) Arm i.MX and Layerscape
lore
Share & tools
lore

Fabio Estevam

author
#0 lore raw

PATCH 1/1 mx27: Make the UART port number explicit

mx27_uart_init_pins does the IOMUX setting for UART1 port.

Change the function name to make the UART port number explicit.

Signed-off-by Fabio Estevam <[email protected]>
---
 arch/arm/cpu/arm926ejs/mx27/generic.c     |    2 +-
 arch/arm/include/asm/arch-mx27/imx-regs.h |    2 +-
 board/logicpd/imx27lite/imx27lite.c       |    2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)
arch/arm/cpu/arm926ejs/mx27/generic.c +1 -1
index 27642bf..222a8e9 100644
@@ -271,7 +271,7 @@ void imx_gpio_mode(int gpio_mode)
 }
 
 #ifdef CONFIG_MXC_UART
-void mx27_uart_init_pins(void)
+void mx27_uart1_init_pins(void)
 {
 	int i;
 	unsigned int mode[] = {
arch/arm/include/asm/arch-mx27/imx-regs.h +1 -1
index 8f40aa7..b4b2fe6 100644
@@ -29,7 +29,7 @@
 extern void imx_gpio_mode (int gpio_mode);
 
 #ifdef CONFIG_MXC_UART
-extern void mx27_uart_init_pins(void);
+extern void mx27_uart1_init_pins(void);
 #endif /* CONFIG_MXC_UART */
 
 #ifdef CONFIG_FEC_MXC
board/logicpd/imx27lite/imx27lite.c +1 -1
index 6eb5cc2..cc341f8 100644
@@ -38,7 +38,7 @@ int board_init (void)
 	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
 
 #ifdef CONFIG_MXC_UART
-	mx27_uart_init_pins();
+	mx27_uart1_init_pins();
 #endif
 #ifdef CONFIG_FEC_MXC
 	mx27_fec_init_pins();
Signature · 1 line
1.6.0.4
#1 lore raw

PATCH 1/1 mx27: Make the UART port number explicit

Quoted 6 lines · Fabio Estevam

mx27_uart_init_pins does the IOMUX setting for UART1 port.

Change the function name to make the UART port number explicit.

Signed-off-by Fabio Estevam <[email protected]>

---

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================