Skip to contentSkip to conversation

Drop obsolete at91rm9200 support

PATCH New Andreas Bießmann 4 participants 15 messages Jul 18, 2011 – Jul 24, 2011

Subsystems (4)
Networking Arm (32-bit) Arm/Microchip (AT91) SoC support Arm/actions semi architecture
lore
Share & tools
lore

Andreas Bießmann

author
#0 lore raw

cover Drop obsolete at91rm9200 support

The series "ARM: remove broken boards" deletes the last few boards which used the obsolete arm920t/at91rm9200 arch code.
This series completes it and removes the now obsolete at91rm9200 arch code completely. Additionally ther are some more cleanup in documentation and surrounding code.

This series applies on top of the "ARM: remove broken boards".

Andreas Bie?mann (6):
ARM: remove obsolete at91rm9200
MAKEALL: remove obsolete at91rm9200 soc a/a/c/arm920t/cpu.c: remove CONFIG_AT91_LEGACY warning README.at91-soc: remove AT91(RM9200) joining notice net/eth.c: drop obsolete at91rm9200 support
README: fix arm920t/at91 path

 MAKEALL                                           |    1 -
 README                                            |    2 +-
 arch/arm/cpu/arm920t/at91rm9200/Makefile          |   56 --
 arch/arm/cpu/arm920t/at91rm9200/bcm5221.c         |  232 ------
 arch/arm/cpu/arm920t/at91rm9200/dm9161.c          |  225 ------
 arch/arm/cpu/arm920t/at91rm9200/ether.c           |  316 --------
 arch/arm/cpu/arm920t/at91rm9200/i2c.c             |  192 -----
 arch/arm/cpu/arm920t/at91rm9200/ks8721.c          |  249 -------
 arch/arm/cpu/arm920t/at91rm9200/lowlevel_init.S   |  169 -----
 arch/arm/cpu/arm920t/at91rm9200/lxt972.c          |  192 -----
 arch/arm/cpu/arm920t/at91rm9200/reset.c           |   71 --
 arch/arm/cpu/arm920t/at91rm9200/spi.c             |  151 ----
 arch/arm/cpu/arm920t/at91rm9200/timer.c           |  160 ----
 arch/arm/cpu/arm920t/at91rm9200/usb.c             |   53 --
 arch/arm/cpu/arm920t/cpu.c                        |    4 -
 arch/arm/include/asm/arch-at91rm9200/AT91RM9200.h |  812 ---------------------
 arch/arm/include/asm/arch-at91rm9200/hardware.h   |   75 --
 doc/README.at91-soc                               |   22 -
 net/eth.c                                         |    4 -
 19 files changed, 1 insertions(+), 2985 deletions(-)
 delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/Makefile
 delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/bcm5221.c
 delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/dm9161.c
 delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/ether.c
 delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/i2c.c
 delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/ks8721.c
 delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/lowlevel_init.S
 delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/lxt972.c
 delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/reset.c
 delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/spi.c
 delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/timer.c
 delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/usb.c
 delete mode 100644 arch/arm/include/asm/arch-at91rm9200/AT91RM9200.h
 delete mode 100644 arch/arm/include/asm/arch-at91rm9200/hardware.h
Signature · 1 line
1.7.6
author
#1 lore raw

PATCH 1/6 ARM: remove obsolete at91rm9200

The big "ARM: remove broken boards" series deletes all boards using obsolete arm920t/at91rm9200 arch code. Therefore we can safely remove this code now.

Signed-off-by Andreas Bie?mann <[email protected]>
---
 arch/arm/cpu/arm920t/at91rm9200/Makefile          |   56 --
 arch/arm/cpu/arm920t/at91rm9200/bcm5221.c         |  232 ------
 arch/arm/cpu/arm920t/at91rm9200/dm9161.c          |  225 ------
 arch/arm/cpu/arm920t/at91rm9200/ether.c           |  316 --------
 arch/arm/cpu/arm920t/at91rm9200/i2c.c             |  192 -----
 arch/arm/cpu/arm920t/at91rm9200/ks8721.c          |  249 -------
 arch/arm/cpu/arm920t/at91rm9200/lowlevel_init.S   |  169 -----
 arch/arm/cpu/arm920t/at91rm9200/lxt972.c          |  192 -----
 arch/arm/cpu/arm920t/at91rm9200/reset.c           |   71 --
 arch/arm/cpu/arm920t/at91rm9200/spi.c             |  151 ----
 arch/arm/cpu/arm920t/at91rm9200/timer.c           |  160 ----
 arch/arm/cpu/arm920t/at91rm9200/usb.c             |   53 --
 arch/arm/include/asm/arch-at91rm9200/AT91RM9200.h |  812 ---------------------
 arch/arm/include/asm/arch-at91rm9200/hardware.h   |   75 --
 14 files changed, 0 insertions(+), 2953 deletions(-)
 delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/Makefile
 delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/bcm5221.c
 delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/dm9161.c
 delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/ether.c
 delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/i2c.c
 delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/ks8721.c
 delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/lowlevel_init.S
 delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/lxt972.c
 delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/reset.c
 delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/spi.c
 delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/timer.c
 delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/usb.c
 delete mode 100644 arch/arm/include/asm/arch-at91rm9200/AT91RM9200.h
 delete mode 100644 arch/arm/include/asm/arch-at91rm9200/hardware.h
arch/arm/cpu/arm920t/at91rm9200/Makefile deleted +0 -56
deleted file mode 100644
index 7530e6a..0000000
@@ -1,56 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(SOC).o
-
-SOBJS	+= lowlevel_init.o
-
-COBJS	+= bcm5221.o
-COBJS	+= dm9161.o
-COBJS	+= ether.o
-COBJS	+= i2c.o
-COBJS-$(CONFIG_KS8721_PHY)	+= ks8721.o
-COBJS	+= lxt972.o
-COBJS	+= reset.o
-COBJS	+= spi.o
-COBJS	+= timer.o
-COBJS	+= usb.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c) $(COBJS-y:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS) $(COBJS-y))
-
-all:	$(obj).depend $(LIB)
-
-$(LIB):	$(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
arch/arm/cpu/arm920t/at91rm9200/bcm5221.c deleted +0 -232

232 lines not on this page · raw message

arch/arm/cpu/arm920t/at91rm9200/dm9161.c deleted +0 -225

225 lines not on this page · raw message

arch/arm/cpu/arm920t/at91rm9200/ether.c deleted +0 -316

316 lines not on this page · raw message

arch/arm/cpu/arm920t/at91rm9200/i2c.c deleted +0 -192

192 lines not on this page · raw message

arch/arm/cpu/arm920t/at91rm9200/ks8721.c deleted +0 -249

249 lines not on this page · raw message

arch/arm/cpu/arm920t/at91rm9200/lowlevel_init.S deleted +0 -169

169 lines not on this page · raw message

arch/arm/cpu/arm920t/at91rm9200/lxt972.c deleted +0 -192

192 lines not on this page · raw message

arch/arm/cpu/arm920t/at91rm9200/reset.c deleted +0 -71

71 lines not on this page · raw message

arch/arm/cpu/arm920t/at91rm9200/spi.c deleted +0 -151

151 lines not on this page · raw message

arch/arm/cpu/arm920t/at91rm9200/timer.c deleted +0 -160

160 lines not on this page · raw message

arch/arm/cpu/arm920t/at91rm9200/usb.c deleted +0 -53

53 lines not on this page · raw message

arch/arm/include/asm/arch-at91rm9200/AT91RM9200.h deleted +0 -812

812 lines not on this page · raw message

arch/arm/include/asm/arch-at91rm9200/hardware.h deleted +0 -75

75 lines not on this page · raw message

Signature · 1 line
1.7.6
author
#2 lore raw

PATCH 1/6 ARM: remove obsolete at91rm9200

Am 18.07.2011 um 21:41 schrieb Andreas Bie?mann:

Quoted 21 lines

The big "ARM: remove broken boards" series deletes all boards using obsolete arm920t/at91rm9200 arch code. Therefore we can safely remove this code now.

Signed-off-by Andreas Bie?mann <[email protected]>

---

arch/arm/cpu/arm920t/at91rm9200/Makefile          |   56 --
arch/arm/cpu/arm920t/at91rm9200/bcm5221.c         |  232 ------
arch/arm/cpu/arm920t/at91rm9200/dm9161.c          |  225 ------
arch/arm/cpu/arm920t/at91rm9200/ether.c           |  316 --------
arch/arm/cpu/arm920t/at91rm9200/i2c.c             |  192 -----
arch/arm/cpu/arm920t/at91rm9200/ks8721.c          |  249 -------
arch/arm/cpu/arm920t/at91rm9200/lowlevel_init.S   |  169 -----
arch/arm/cpu/arm920t/at91rm9200/lxt972.c          |  192 -----
arch/arm/cpu/arm920t/at91rm9200/reset.c           |   71 --
arch/arm/cpu/arm920t/at91rm9200/spi.c             |  151 ----
arch/arm/cpu/arm920t/at91rm9200/timer.c           |  160 ----
arch/arm/cpu/arm920t/at91rm9200/usb.c             |   53 --
arch/arm/include/asm/arch-at91rm9200/AT91RM9200.h |  812 ---------------------
arch/arm/include/asm/arch-at91rm9200/hardware.h   |   75 --
14 files changed, 0 insertions(+), 2953 deletions(-)
Quoted 14 lines

delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/Makefile delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/bcm5221.c delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/dm9161.c delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/ether.c delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/i2c.c delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/ks8721.c delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/lowlevel_init.S delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/lxt972.c delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/reset.c delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/spi.c delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/timer.c delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/usb.c delete mode 100644 arch/arm/include/asm/arch-at91rm9200/AT91RM9200.h delete mode 100644 arch/arm/include/asm/arch-at91rm9200/hardware.h

This message got bounced ... but this is all it does:
git rm -r arch/arm/cpu/arm920t/ arch/arm/include/asm/arch-at91rm9200/

regards

Andreas Bie?mann

#3 lore raw

PATCH 1/6 ARM: remove obsolete at91rm9200

Dear Andreas,

Quoted 6 lines · In message <[email protected]> you wrote:

Am 18.07.2011 um 21:41 schrieb Andreas Bie?mann:

Quoted 3 lines

The big "ARM: remove broken boards" series deletes all boards using obsolete arm920t/at91rm9200 arch code. Therefore we can safely remove this code now.

...

Quoted 2 lines

This message got bounced ... but this is all it does:
git rm -r arch/arm/cpu/arm920t/ arch/arm/include/asm/arch-at91rm9200/

What do you mean "got bounced" ?

What as the exact error message?

Best regards,

Wolfgang Denk

Signature · 6 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Our OS who art in CPU, UNIX be thy name.
Thy programs run, thy syscalls done,
In kernel as it is in user!
author
#4 lore raw

PATCH 1/6 ARM: remove obsolete at91rm9200

Dear Wolfgang,

Am 18.07.2011 um 22:19 schrieb Wolfgang Denk:

Quoted 6 lines

Dear Andreas,

Quoted 3 lines · In message <[email protected]> you wrote:

Am 18.07.2011 um 21:41 schrieb Andreas Bie?mann:

Quoted 8 lines
Quoted 3 lines
Quoted 3 lines

The big "ARM: remove broken boards" series deletes all boards using obsolete arm920t/at91rm9200 arch code. Therefore we can safely remove this code now.

...

Quoted 2 lines

This message got bounced ... but this is all it does:
git rm -r arch/arm/cpu/arm920t/ arch/arm/include/asm/arch-at91rm9200/

What do you mean "got bounced" ?

I got an message from u-boot-bounces at lists.denx.de
Subject: 'Your message to U-Boot awaits moderator approval'

Quoted 1 line

What as the exact error message?

---8<---
...
[PATCH 1/6] ARM: remove obsolete at91rm9200

Is being held until the list moderator can review it for approval.

The reason it is being held:

Message body is too big: 117700 bytes with a limit of 100 KB
...
--->8---

I guess you will see the correct message and maybe approve for the list. My short reply should only point out the 'patch' is a plane removal of files.

regards

Andreas Bie?mann

author
#5 lore raw

PATCH 2/6 MAKEALL: remove obsolete at91rm9200 soc

In reply to Andreas Bießmann

Since complete at91rm9200 SoC device was droped (due to replacement with common at91 code) this parameter can safely be removed.

Signed-off-by Andreas Bie?mann <[email protected]>
---
 MAKEALL |    1 -
 1 files changed, 0 insertions(+), 1 deletions(-)
MAKEALL +0 -1
index fe85e49..4de82e3 100755
@@ -392,7 +392,6 @@ LIST_ARMV7="		\
 #########################################################################
 
 LIST_at91="$(boards_by_soc at91)\
-	$(boards_by_soc at91rm9200)\
 	at91sam9260ek		\
 	at91sam9g20ek		\
 	pm9g45			\
Signature · 1 line
1.7.6
author
#6 lore raw

PATCH 3/6 a/a/c/arm920t/cpu.c: remove CONFIG_AT91_LEGACY warning

In reply to Andreas Bießmann

The CONFIG_AT91_LEGACY warning became obsolete due to complete removal of at91rm9200 arch code in arm920t.

Signed-off-by Andreas Bie?mann <[email protected]>
---
 arch/arm/cpu/arm920t/cpu.c |    4 ----
 1 files changed, 0 insertions(+), 4 deletions(-)
arch/arm/cpu/arm920t/cpu.c +0 -4
index be82c87..34adb11 100644
@@ -33,10 +33,6 @@
 #include <command.h>
 #include <asm/system.h>
 
-#ifdef CONFIG_AT91_LEGACY
-#warning Your board is using legacy AT91RM9200 SoC access. Please update!
-#endif
-
 static void cache_flush(void);
 
 int cleanup_before_linux (void)
Signature · 1 line
1.7.6
author
#7 lore raw

PATCH 4/6 README.at91-soc: remove AT91(RM9200) joining notice

In reply to Andreas Bießmann

Since all currently supported at91rm9200 boards are migrated to at91 support the joining notice can be removed.

Signed-off-by Andreas Bie?mann <[email protected]>
---
 doc/README.at91-soc |   22 ----------------------
 1 files changed, 0 insertions(+), 22 deletions(-)
doc/README.at91-soc +0 -22
index 425fc58..ed6e76a 100644
@@ -40,25 +40,3 @@ The method for updating
 4. Convert arch, driver and boards file to new SoC
 5. remove legacy code, if all boards and drives are ready
 
- Join AT91 and AT91RM9200 SoC
-==============================
-
-Approximately 95 percent of AT91 and AT91RM9200 SoC parts are the same.
-So, we should use the chance, to join both archs togetter.
-
-To do this follow step needed:
-
-1. change Makefile
-	@$(MKCONFIG) $(@:_config=) arm arm920t board vendor at91rm9200
-  to
-	@$(MKCONFIG) $(@:_config=) arm arm920t board vendor at91
-2. remove CONFIG_AT91_LEGACY in board config
-3. convert boards file to new SoC access
-4. convert or change drivers
-
-To support the joining process, a new SoC dir (at91) has been adding to
-arm920t arch directory. This directory contains files like at91rm9200 dir, but
-uses the new c structure Soc access. The advantage of this is, we don't merge
-old Soc access code and new code while the board are not converted.
-Finally we can delete the whole at91rm9200 dir, if all board support the
-new AT91-SoC access.
Signature · 1 line
1.7.6
author
#8 lore raw

PATCH 5/6 net/eth.c: drop obsolete at91rm9200 support

In reply to Andreas Bießmann

All available at91rm9200 boards have migrated to ar920t/at91 and therefore to CONFIG_NET_MULTI.
The obsolete at91rm9200_miiphy_initialize() was removed in "ARM: remove obsolete at91rm9200".

Signed-off-by Andreas Bie?mann <[email protected]>
---
 net/eth.c |    4 ----
 1 files changed, 0 insertions(+), 4 deletions(-)
net/eth.c +0 -4
index 6523834..3aad71f 100644
@@ -521,7 +521,6 @@ char *eth_get_name (void)
 
 #warning Ethernet driver is deprecated.  Please update to use CONFIG_NET_MULTI
 
-extern int at91rm9200_miiphy_initialize(bd_t *bis);
 extern int mcf52x2_miiphy_initialize(bd_t *bis);
 extern int ns7520_miiphy_initialize(bd_t *bis);
 

@@ -532,9 +531,6 @@ int eth_initialize(bd_t *bis)
 	miiphy_init();
 #endif
 
-#if defined(CONFIG_AT91RM9200)
-	at91rm9200_miiphy_initialize(bis);
-#endif
 #if defined(CONFIG_MCF52x2)
 	mcf52x2_miiphy_initialize(bis);
 #endif
Signature · 1 line
1.7.6
author
#9 lore raw

PATCH 6/6 README: fix arm920t/at91 path

In reply to Andreas Bießmann
Signed-off-by Andreas Bie?mann <[email protected]>
---
 README |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
README +1 -1
index a5c1894..7915fa0 100644
@@ -147,7 +147,7 @@ Directory Hierarchy:
     /cpu		CPU specific files
       /arm720t		Files specific to ARM 720 CPUs
       /arm920t		Files specific to ARM 920 CPUs
-	/at91rm9200	Files specific to Atmel AT91RM9200 CPU
+	/at91		Files specific to Atmel AT91RM9200 CPU
 	/imx		Files specific to Freescale MC9328 i.MX CPUs
 	/s3c24x0	Files specific to Samsung S3C24X0 CPUs
       /arm925t		Files specific to ARM 925 CPUs
Signature · 1 line
1.7.6
#10 lore raw

cover Drop obsolete at91rm9200 support

In reply to Andreas Bießmann

Dear Wolfgang,

Quoted 36 lines · Andreas Bie?mann

The series "ARM: remove broken boards" deletes the last few boards which used the obsolete arm920t/at91rm9200 arch code.
This series completes it and removes the now obsolete at91rm9200 arch code completely. Additionally ther are some more cleanup in documentation and surrounding code.

This series applies on top of the "ARM: remove broken boards".

Andreas Bie?mann (6):
ARM: remove obsolete at91rm9200
MAKEALL: remove obsolete at91rm9200 soc a/a/c/arm920t/cpu.c: remove CONFIG_AT91_LEGACY warning README.at91-soc: remove AT91(RM9200) joining notice net/eth.c: drop obsolete at91rm9200 support
README: fix arm920t/at91 path

  MAKEALL                                           |    1 -
  README                                            |    2 +-
  arch/arm/cpu/arm920t/at91rm9200/Makefile          |   56 --
  arch/arm/cpu/arm920t/at91rm9200/bcm5221.c         |  232 ------
  arch/arm/cpu/arm920t/at91rm9200/dm9161.c          |  225 ------
  arch/arm/cpu/arm920t/at91rm9200/ether.c           |  316 --------
  arch/arm/cpu/arm920t/at91rm9200/i2c.c             |  192 -----
  arch/arm/cpu/arm920t/at91rm9200/ks8721.c          |  249 -------
  arch/arm/cpu/arm920t/at91rm9200/lowlevel_init.S   |  169 -----
  arch/arm/cpu/arm920t/at91rm9200/lxt972.c          |  192 -----
  arch/arm/cpu/arm920t/at91rm9200/reset.c           |   71 --
  arch/arm/cpu/arm920t/at91rm9200/spi.c             |  151 ----
  arch/arm/cpu/arm920t/at91rm9200/timer.c           |  160 ----
  arch/arm/cpu/arm920t/at91rm9200/usb.c             |   53 --
  arch/arm/cpu/arm920t/cpu.c                        |    4 -
  arch/arm/include/asm/arch-at91rm9200/AT91RM9200.h |  812 ---------------------
  arch/arm/include/asm/arch-at91rm9200/hardware.h   |   75 --
  doc/README.at91-soc                               |   22 -
  net/eth.c                                         |    4 -
  19 files changed, 1 insertions(+), 2985 deletions(-)
Quoted 15 lines

delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/Makefile delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/bcm5221.c delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/dm9161.c delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/ether.c delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/i2c.c delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/ks8721.c delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/lowlevel_init.S delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/lxt972.c delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/reset.c delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/spi.c delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/timer.c delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/usb.c delete mode 100644 arch/arm/include/asm/arch-at91rm9200/AT91RM9200.h delete mode 100644 arch/arm/include/asm/arch-at91rm9200/hardware.h

I think it would be good to apply those patches removing the old, superseded at91rm9200 files to master instead of next.

Would that be ok?

Best Regards,
Reinhard

#11 lore raw

cover Drop obsolete at91rm9200 support

Dear Reinhard Meyer,

Quoted 6 lines · In message <[email protected]> you wrote:
Quoted 6 lines

The series "ARM: remove broken boards" deletes the last few boards which used the obsolete arm920t/at91rm9200 arch code.
This series completes it and removes the now obsolete at91rm9200 arch code completely. Additionally ther are some more cleanup in documentation and surrounding code.

...

Quoted 4 lines

I think it would be good to apply those patches removing the old, superseded at91rm9200 files to master instead of next.

Would that be ok?

Yes, I appreciate this.

Best regards,

Wolfgang Denk

Signature · 9 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
This was an  amazing  creation  using  small  squares  of  compressed
vegetable  matter on which letters were made by means of small carbon
particles from a stylus, giving an effect similar to the  traditional
word-processor  screen. It seemed amazingly portable and I never once
saw him have to change the batteries.
        - Terry Pratchett & Stephen Briggs, _The Discworld Companion_
#12 lore raw

cover Drop obsolete at91rm9200 support

Dear Wolfgang Denk,

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

The series "ARM: remove broken boards" deletes the last few boards which used the obsolete arm920t/at91rm9200 arch code.
This series completes it and removes the now obsolete at91rm9200 arch code completely. Additionally ther are some more cleanup in documentation and surrounding code.

Quoted 7 lines

...

Quoted 4 lines

I think it would be good to apply those patches removing the old, superseded at91rm9200 files to master instead of next.

Would that be ok?

Yes, I appreciate this.

Series applied to u-boot-atmel/master.
Thanks, Reinhard

#13 lore raw

cover Drop obsolete at91rm9200 support

Hi Reinhard,

Le 21/07/2011 14:05, Reinhard Meyer a ?crit :

Quoted 7 lines

Dear Wolfgang Denk,

Quoted 6 lines
Quoted 5 lines
Quoted 5 lines

The series "ARM: remove broken boards" deletes the last few boards which used the obsolete arm920t/at91rm9200 arch code.
This series completes it and removes the now obsolete at91rm9200 arch code completely. Additionally ther are some more cleanup in documentation and surrounding code.

...

Quoted 8 lines
Quoted 6 lines
Quoted 4 lines

I think it would be good to apply those patches removing the old, superseded at91rm9200 files to master instead of next.

Would that be ok?

Yes, I appreciate this.

Series applied to u-boot-atmel/master.
Thanks, Reinhard

Do you mean you've applied Wolfgang's 50-odd patchset removing boards and then Andreas' patch?

Amicalement,

Signature · 1 line
Albert.
#14 lore raw

cover Drop obsolete at91rm9200 support

Quoted 13 lines · Albert ARIBAUD

Hi Reinhard,

Le 21/07/2011 14:05, Reinhard Meyer a ?crit :

Quoted 10 lines

Dear Wolfgang Denk,

Quoted 9 lines
Quoted 5 lines
Quoted 5 lines

The series "ARM: remove broken boards" deletes the last few boards which used the obsolete arm920t/at91rm9200 arch code.
This series completes it and removes the now obsolete at91rm9200 arch code completely. Additionally ther are some more cleanup in documentation and surrounding code.

...

Quoted 3 lines

I think it would be good to apply those patches removing the old, superseded at91rm9200 files to master instead of next.

Quoted 7 lines
Quoted 5 lines
Quoted 3 lines
Quoted 1 line

Would that be ok?

Yes, I appreciate this.

Series applied to u-boot-atmel/master.
Thanks, Reinhard

Do you mean you've applied Wolfgang's 50-odd patchset removing boards and then Andreas' patch?

Of course not!
Only the Series 1/6 to 6/6 of that "Drop obsolete at91rm9200...". That's not a broken board removal anyway.

Best Regards,
Reinhard