Skip to contentSkip to conversation

ASoC: Implement new DC servo readback mode for late WM8994 revisions

PATCH In review Mark Brown 2 participants 3 messages Aug 1, 2011

Subsystems (4)
lore
Share & tools
lore

Mark Brown

author
#0 lore raw

PATCH 1/2 ASoC: Implement new DC servo readback mode for late WM8994 revisions

Later WM8994 devices implement a new DC servo readback mode with the register used to access the offset moved to register 0x59. Implement support for this and enable it on the appropriate devices.

---
 include/linux/mfd/wm8994/registers.h |    1 +
 sound/soc/codecs/wm8994.c            |    3 ++-
 sound/soc/codecs/wm_hubs.c           |   19 +++++++++++++++----
 3 files changed, 18 insertions(+), 5 deletions(-)
include/linux/mfd/wm8994/registers.h +1 -0
index f3ee842..6152914 100644
@@ -72,6 +72,7 @@
 #define WM8994_DC_SERVO_2                       0x55
 #define WM8994_DC_SERVO_4                       0x57
 #define WM8994_DC_SERVO_READBACK                0x58
+#define WM8994_DC_SERVO_4E			0x59
 #define WM8994_ANALOGUE_HP_1                    0x60
 #define WM8958_MIC_DETECT_1                     0xD0
 #define WM8958_MIC_DETECT_2                     0xD1
sound/soc/codecs/wm8994.c +2 -1
index cc8222c..e1e9aca 100644
@@ -107,6 +107,7 @@ static int wm8994_volatile(struct snd_soc_codec *codec, unsigned int reg)
 	case WM8994_LDO_2:
 	case WM8958_DSP2_EXECCONTROL:
 	case WM8958_MIC_DETECT_3:
+	case WM8994_DC_SERVO_4E:
 		return 1;
 	default:
 		return 0;
@@ -2965,7 +2966,7 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec)
 			wm8994->hubs.series_startup = 1;
 			break;
 		default:
-			wm8994->hubs.dcs_readback_mode = 1;
+			wm8994->hubs.dcs_readback_mode = 2;
 			break;
 		}
 
sound/soc/codecs/wm_hubs.c +15 -4
index 4416a76..524bdc6 100644
@@ -18,6 +18,7 @@
 #include <linux/pm.h>
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
+#include <linux/mfd/wm8994/registers.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
@@ -116,14 +117,23 @@ static void calibrate_dc_servo(struct snd_soc_codec *codec)
 {
 	struct wm_hubs_data *hubs = snd_soc_codec_get_drvdata(codec);
 	s8 offset;
-	u16 reg, reg_l, reg_r, dcs_cfg;
+	u16 reg, reg_l, reg_r, dcs_cfg, dcs_reg;
+
+	switch (hubs->dcs_readback_mode) {
+	case 2:
+		dcs_reg = WM8994_DC_SERVO_4E;
+		break;
+	default:
+		dcs_reg = WM8993_DC_SERVO_3;
+		break;
+	}
 
 	/* If we're using a digital only path and have a previously
 	 * callibrated DC servo offset stored then use that. */
 	if (hubs->class_w && hubs->class_w_dcs) {
 		dev_dbg(codec->dev, "Using cached DC servo offset %x\n",
 			hubs->class_w_dcs);
-		snd_soc_write(codec, WM8993_DC_SERVO_3, hubs->class_w_dcs);
+		snd_soc_write(codec, dcs_reg, hubs->class_w_dcs);
 		wait_for_dc_servo(codec,
 				  WM8993_DCS_TRIG_DAC_WR_0 |
 				  WM8993_DCS_TRIG_DAC_WR_1);
@@ -154,8 +164,9 @@ static void calibrate_dc_servo(struct snd_soc_codec *codec)
 		reg_r = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_2)
 			& WM8993_DCS_INTEG_CHAN_1_MASK;
 		break;
+	case 2:
 	case 1:
-		reg = snd_soc_read(codec, WM8993_DC_SERVO_3);
+		reg = snd_soc_read(codec, dcs_reg);
 		reg_r = (reg & WM8993_DCS_DAC_WR_VAL_1_MASK)
 			>> WM8993_DCS_DAC_WR_VAL_1_SHIFT;
 		reg_l = reg & WM8993_DCS_DAC_WR_VAL_0_MASK;
@@ -185,7 +196,7 @@ static void calibrate_dc_servo(struct snd_soc_codec *codec)
 		dev_dbg(codec->dev, "DCS result: %x\n", dcs_cfg);
 
 		/* Do it */
-		snd_soc_write(codec, WM8993_DC_SERVO_3, dcs_cfg);
+		snd_soc_write(codec, dcs_reg, dcs_cfg);
 		wait_for_dc_servo(codec,
 				  WM8993_DCS_TRIG_DAC_WR_0 |
 				  WM8993_DCS_TRIG_DAC_WR_1);
Signature · 1 line
1.7.5.4
author
#1 lore raw

PATCH 2/2 ASoC: Support separate left and right channel dcs_codes values

Some devices can have performance optimized by setting different offsets for left and right channels.

---
 sound/soc/codecs/wm8993.c  |    3 ++-
 sound/soc/codecs/wm8994.c  |    3 ++-
 sound/soc/codecs/wm_hubs.c |   13 +++++++------
 sound/soc/codecs/wm_hubs.h |    3 ++-
 4 files changed, 13 insertions(+), 9 deletions(-)
sound/soc/codecs/wm8993.c +2 -1
index 19fc081..eec8e14 100644
@@ -1437,7 +1437,8 @@ static int wm8993_probe(struct snd_soc_codec *codec)
 	int ret, i, val;
 
 	wm8993->hubs_data.hp_startup_mode = 1;
-	wm8993->hubs_data.dcs_codes = -2;
+	wm8993->hubs_data.dcs_codes_l = -2;
+	wm8993->hubs_data.dcs_codes_r = -2;
 	wm8993->hubs_data.series_startup = 1;
 
 	ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C);
sound/soc/codecs/wm8994.c +2 -1
index e1e9aca..d3c4f80 100644
@@ -2960,7 +2960,8 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec)
 		switch (wm8994->revision) {
 		case 2:
 		case 3:
-			wm8994->hubs.dcs_codes = -5;
+			wm8994->hubs.dcs_codes_l = -5;
+			wm8994->hubs.dcs_codes_r = -5;
 			wm8994->hubs.hp_startup_mode = 1;
 			wm8994->hubs.dcs_readback_mode = 1;
 			wm8994->hubs.series_startup = 1;
sound/soc/codecs/wm_hubs.c +7 -6
index 524bdc6..ca8ce03 100644
@@ -179,18 +179,19 @@ static void calibrate_dc_servo(struct snd_soc_codec *codec)
 	dev_dbg(codec->dev, "DCS input: %x %x\n", reg_l, reg_r);
 
 	/* Apply correction to DC servo result */
-	if (hubs->dcs_codes) {
-		dev_dbg(codec->dev, "Applying %d code DC servo correction\n",
-			hubs->dcs_codes);
+	if (hubs->dcs_codes_l || hubs->dcs_codes_r) {
+		dev_dbg(codec->dev,
+			"Applying %d/%d code DC servo correction\n",
+			hubs->dcs_codes_l, hubs->dcs_codes_r);
 
 		/* HPOUT1R */
 		offset = reg_r;
-		offset += hubs->dcs_codes;
+		offset += hubs->dcs_codes_r;
 		dcs_cfg = (u8)offset << WM8993_DCS_DAC_WR_VAL_1_SHIFT;
 
 		/* HPOUT1L */
 		offset = reg_l;
-		offset += hubs->dcs_codes;
+		offset += hubs->dcs_codes_l;
 		dcs_cfg |= (u8)offset;
 
 		dev_dbg(codec->dev, "DCS result: %x\n", dcs_cfg);
@@ -228,7 +229,7 @@ static int wm8993_put_dc_servo(struct snd_kcontrol *kcontrol,
 
 	/* If we're applying an offset correction then updating the
 	 * callibration would be likely to introduce further offsets. */
-	if (hubs->dcs_codes || hubs->no_series_update)
+	if (hubs->dcs_codes_l || hubs->dcs_codes_r || hubs->no_series_update)
 		return ret;
 
 	/* Only need to do this if the outputs are active */
sound/soc/codecs/wm_hubs.h +2 -1
index 676b125..c674c7a 100644
@@ -23,7 +23,8 @@ extern const unsigned int wm_hubs_spkmix_tlv[];
 
 /* This *must* be the first element of the codec->private_data struct */
 struct wm_hubs_data {
-	int dcs_codes;
+	int dcs_codes_l;
+	int dcs_codes_r;
 	int dcs_readback_mode;
 	int hp_startup_mode;
 	int series_startup;
Signature · 1 line
1.7.5.4
Acked-by on v1 1/2
#2 lore raw
In reply to Mark Brown
Quoted 5 lines · Mark Brown

Later WM8994 devices implement a new DC servo readback mode with the register used to access the offset moved to register 0x59. Implement support for this and enable it on the appropriate devices.

both

Quoted 97 lines
---
 include/linux/mfd/wm8994/registers.h |    1 +
 sound/soc/codecs/wm8994.c            |    3 ++-
 sound/soc/codecs/wm_hubs.c           |   19 +++++++++++++++----
 3 files changed, 18 insertions(+), 5 deletions(-)
include/linux/mfd/wm8994/registers.h +1 -0
index f3ee842..6152914 100644
@@ -72,6 +72,7 @@
 #define WM8994_DC_SERVO_2                       0x55
 #define WM8994_DC_SERVO_4                       0x57
 #define WM8994_DC_SERVO_READBACK                0x58
+#define WM8994_DC_SERVO_4E			0x59
 #define WM8994_ANALOGUE_HP_1                    0x60
 #define WM8958_MIC_DETECT_1                     0xD0
 #define WM8958_MIC_DETECT_2                     0xD1
sound/soc/codecs/wm8994.c +2 -1
index cc8222c..e1e9aca 100644
@@ -107,6 +107,7 @@ static int wm8994_volatile(struct snd_soc_codec *codec, unsigned int reg)
 	case WM8994_LDO_2:
 	case WM8958_DSP2_EXECCONTROL:
 	case WM8958_MIC_DETECT_3:
+	case WM8994_DC_SERVO_4E:
 		return 1;
 	default:
 		return 0;
@@ -2965,7 +2966,7 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec)
 			wm8994->hubs.series_startup = 1;
 			break;
 		default:
-			wm8994->hubs.dcs_readback_mode = 1;
+			wm8994->hubs.dcs_readback_mode = 2;
 			break;
 		}
 
sound/soc/codecs/wm_hubs.c +15 -4
index 4416a76..524bdc6 100644
@@ -18,6 +18,7 @@
 #include <linux/pm.h>
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
+#include <linux/mfd/wm8994/registers.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
@@ -116,14 +117,23 @@ static void calibrate_dc_servo(struct snd_soc_codec *codec)
 {
 	struct wm_hubs_data *hubs = snd_soc_codec_get_drvdata(codec);
 	s8 offset;
-	u16 reg, reg_l, reg_r, dcs_cfg;
+	u16 reg, reg_l, reg_r, dcs_cfg, dcs_reg;
+
+	switch (hubs->dcs_readback_mode) {
+	case 2:
+		dcs_reg = WM8994_DC_SERVO_4E;
+		break;
+	default:
+		dcs_reg = WM8993_DC_SERVO_3;
+		break;
+	}
 
 	/* If we're using a digital only path and have a previously
 	 * callibrated DC servo offset stored then use that. */
 	if (hubs->class_w && hubs->class_w_dcs) {
 		dev_dbg(codec->dev, "Using cached DC servo offset %x\n",
 			hubs->class_w_dcs);
-		snd_soc_write(codec, WM8993_DC_SERVO_3, hubs->class_w_dcs);
+		snd_soc_write(codec, dcs_reg, hubs->class_w_dcs);
 		wait_for_dc_servo(codec,
 				  WM8993_DCS_TRIG_DAC_WR_0 |
 				  WM8993_DCS_TRIG_DAC_WR_1);
@@ -154,8 +164,9 @@ static void calibrate_dc_servo(struct snd_soc_codec *codec)
 		reg_r = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_2)
 			& WM8993_DCS_INTEG_CHAN_1_MASK;
 		break;
+	case 2:
 	case 1:
-		reg = snd_soc_read(codec, WM8993_DC_SERVO_3);
+		reg = snd_soc_read(codec, dcs_reg);
 		reg_r = (reg & WM8993_DCS_DAC_WR_VAL_1_MASK)
 			>> WM8993_DCS_DAC_WR_VAL_1_SHIFT;
 		reg_l = reg & WM8993_DCS_DAC_WR_VAL_0_MASK;
@@ -185,7 +196,7 @@ static void calibrate_dc_servo(struct snd_soc_codec *codec)
 		dev_dbg(codec->dev, "DCS result: %x\n", dcs_cfg);
 
 		/* Do it */
-		snd_soc_write(codec, WM8993_DC_SERVO_3, dcs_cfg);
+		snd_soc_write(codec, dcs_reg, dcs_cfg);
 		wait_for_dc_servo(codec,
 				  WM8993_DCS_TRIG_DAC_WR_0 |
 				  WM8993_DCS_TRIG_DAC_WR_1);