Skip to contentSkip to conversation

Autobuilder issue status

DISCUSSION Paul Eggleton 4 participants 5 messages Aug 3, 2011

lore
Share & tools
lore

Paul Eggleton

author
#0 lore raw

Hi all,

Richard requested a summary of the current issues shown up on the autobuilder, here it is:

1. sstate not getting cleared (autobuilder script fix needed - maybe just delete the whole sstate-cache dir?)
http://autobuilder.yoctoproject.org:8010/builders/crownbay-
noemgd/builds/27/steps/shell/logs/stdio

2. jasperforest and sugarbay need fixing for tune file changes:
I have a first-pass patch for this, just a matter of fixing up the machine .conf files for these two layers.
http://autobuilder.yoctoproject.org:8010/builders/jasperforest/builds/29/steps/shell_10/logs/stdio

3. glibc-utils PREFERRED_PROVIDER clash:
(There's a patch merged in master for this already)
http://autobuilder.yoctoproject.org:8010/builders/nightly-
external/builds/57/steps/shell_6/logs/stdio

4. manifest file missing in sdk build:
http://autobuilder.yoctoproject.org:8010/builders/nightly-external-
toolchain/builds/52/steps/shell_7/logs/stdio

5. libXinerama missing when building gtk+
Not sure if this is a result of previous errors?
http://autobuilder.yoctoproject.org:8010/builders/nightly-
internal/builds/50/steps/shell_21/logs/stdio

6. "perl isn't executable!":
http://autobuilder.yoctoproject.org:8010/builders/nightly-
external/builds/60/steps/shell_26/logs/stdio

7. -live images still being built:
Beth was fixing (has fixed?) this. It did bring up an interesting issue in that -k makes the build look like it succeeded - have filed bug #1322 for this one.
http://autobuilder.yoctoproject.org:8010/builders/crownbay-
noemgd/builds/27/steps/shell_10/logs/stdio

8. meta-toolchain "/bin/sh" dependency errors:
Richard thinks he knows what's wrong here but is unsure of the fix.
http://autobuilder.yoctoproject.org:8010/builders/nightly-external-
toolchain/builds/55/steps/shell_14/logs/stdio

9. aclocal .m4 file issue (bug #861)
Richard has some potential suggestions, actual fix still needed though.
http://autobuilder.yoctoproject.org:8010/builders/nightly-
external/builds/60/steps/shell_14/logs/stdio

10. beagleboard libzypp failure
Richard has a patch for part of it, would like Mark to look into the rest:
http://bugzilla.pokylinux.org/show_bug.cgi?id=1313

Cheers,
Paul

Signature · 2 lines
Paul Eggleton
Intel Open Source Technology Centre
#1 lore raw
Quoted 24 lines · Paul Eggleton

Hi all,

Richard requested a summary of the current issues shown up on the autobuilder, here it is:

1. sstate not getting cleared (autobuilder script fix needed - maybe just delete the whole sstate-cache dir?)
http://autobuilder.yoctoproject.org:8010/builders/crownbay-
noemgd/builds/27/steps/shell/logs/stdio

2. jasperforest and sugarbay need fixing for tune file changes:
I have a first-pass patch for this, just a matter of fixing up the machine .conf files for these two layers.
http://autobuilder.yoctoproject.org:8010/builders/jasperforest/builds/29/steps/shell_10/logs/stdio

3. glibc-utils PREFERRED_PROVIDER clash:
(There's a patch merged in master for this already)
http://autobuilder.yoctoproject.org:8010/builders/nightly-
external/builds/57/steps/shell_6/logs/stdio

4. manifest file missing in sdk build:
http://autobuilder.yoctoproject.org:8010/builders/nightly-external-
toolchain/builds/52/steps/shell_7/logs/stdio

Quoted 8 lines

5. libXinerama missing when building gtk+
Not sure if this is a result of previous errors?
http://autobuilder.yoctoproject.org:8010/builders/nightly-
internal/builds/50/steps/shell_21/logs/stdio

6. "perl isn't executable!":
http://autobuilder.yoctoproject.org:8010/builders/nightly-
external/builds/60/steps/shell_26/logs/stdio

I have seen possibly a similar issue: libxml-parser-perl failing to compile
I tracked it down to two problems:
a) using an sstate mirror results in the rpath that's compiled into the native-perl being hardcoded to the full path of whatever built the sstate-cache. The means the compiled in rpath is wrong on any other machine.

b) perl MakeMaker is using perl.real instead of the wrapper script, this results in the PERL5LIB variable not being passed in to perl on execution. This in combination with problem A means perl cannot find it's libraries.

I would recommend randomising the base directory for autobuilders if they are using an sstate mirror, in order to flush out bugs caused by problem A.

I cannot figure out how to fix problem B at the moment and I'll be on holiday soon. So I thought I'd post about this issue before I go.

Quoted 24 lines

7. -live images still being built:
Beth was fixing (has fixed?) this. It did bring up an interesting issue in that -k makes the build look like it succeeded - have filed bug #1322 for this one.
http://autobuilder.yoctoproject.org:8010/builders/crownbay-
noemgd/builds/27/steps/shell_10/logs/stdio

8. meta-toolchain "/bin/sh" dependency errors:
Richard thinks he knows what's wrong here but is unsure of the fix.
http://autobuilder.yoctoproject.org:8010/builders/nightly-external-
toolchain/builds/55/steps/shell_14/logs/stdio

9. aclocal .m4 file issue (bug #861)
Richard has some potential suggestions, actual fix still needed though.
http://autobuilder.yoctoproject.org:8010/builders/nightly-
external/builds/60/steps/shell_14/logs/stdio

10. beagleboard libzypp failure
Richard has a patch for part of it, would like Mark to look into the rest:
http://bugzilla.pokylinux.org/show_bug.cgi?id=1313

Cheers,
Paul

#2 lore raw
In reply to Paul Eggleton
Quoted 9 lines · Paul Eggleton

Hi all,

Richard requested a summary of the current issues shown up on the autobuilder, here it is:

1. sstate not getting cleared (autobuilder script fix needed - maybe just delete the whole sstate-cache dir?)
http://autobuilder.yoctoproject.org:8010/builders/crownbay-
noemgd/builds/27/steps/shell/logs/stdio

I'll look at this today.

Quoted 5 lines

7. -live images still being built:
Beth was fixing (has fixed?) this. It did bring up an interesting issue in that -k makes the build look like it succeeded - have filed bug #1322 for this one.
http://autobuilder.yoctoproject.org:8010/builders/crownbay-
noemgd/builds/27/steps/shell_10/logs/stdio

This is a bug in the current buildbot. make reconfig blows up. I'm waiting to bring the builder down and back up once our current nightly is done

Quoted 2 lines

Cheers,
Paul

Thanks, I'll get this done ASAP
-b

#3 lore raw
Quoted 7 lines · Elizabeth
Quoted 5 lines · Paul Eggleton

Hi all,

Richard requested a summary of the current issues shown up on the autobuilder, here it is:

Quoted 6 lines
Quoted 4 lines

1. sstate not getting cleared (autobuilder script fix needed - maybe just delete the whole sstate-cache dir?)
http://autobuilder.yoctoproject.org:8010/builders/crownbay-
noemgd/builds/27/steps/shell/logs/stdio

I'll look at this today.

Looked at. This is an issue with ARG_MAX on the host. rming the dir and then doing a mkdir solves it. Which means there is a LOT of files in sstate-cache and it just recently pushed over the ARG_MAX limit (like, a few builds ago).

Quoted 9 lines
Quoted 5 lines

7. -live images still being built:
Beth was fixing (has fixed?) this. It did bring up an interesting issue in that -k makes the build look like it succeeded - have filed bug #1322 for this one.
http://autobuilder.yoctoproject.org:8010/builders/crownbay-
noemgd/builds/27/steps/shell_10/logs/stdio

This is a bug in the current buildbot. make reconfig blows up. I'm waiting to bring the builder down and back up once our current nightly is done

And fixed.

Quoted 6 lines
Quoted 2 lines

Cheers,
Paul

Thanks, I'll get this done ASAP
-b

#4 lore raw
In reply to Paul Eggleton
Quoted 7 lines · Paul Eggleton

Richard requested a summary of the current issues shown up on the autobuilder, here it is:

1. sstate not getting cleared (autobuilder script fix needed - maybe just delete the whole sstate-cache dir?)
http://autobuilder.yoctoproject.org:8010/builders/crownbay-
noemgd/builds/27/steps/shell/logs/stdio

Beth needs to take a look at that one I suspect.

Quoted 4 lines

2. jasperforest and sugarbay need fixing for tune file changes:
I have a first-pass patch for this, just a matter of fixing up the machine .conf files for these two layers.
http://autobuilder.yoctoproject.org:8010/builders/jasperforest/builds/29/steps/shell_10/logs/stdio

There is a fix in master to clean up the TARGET_ARCH* variables on x86_64. If we could follow that through into meta-intel it should resolve much of these kinds of issues.

Quoted 4 lines

3. glibc-utils PREFERRED_PROVIDER clash:
(There's a patch merged in master for this already)
http://autobuilder.yoctoproject.org:8010/builders/nightly-
external/builds/57/steps/shell_6/logs/stdio

Fix should be in master.

Quoted 4 lines

4. manifest file missing in sdk build:
http://autobuilder.yoctoproject.org:8010/builders/nightly-external-
toolchain/builds/52/steps/shell_7/logs/stdio

Quoted 8 lines

5. libXinerama missing when building gtk+
Not sure if this is a result of previous errors?
http://autobuilder.yoctoproject.org:8010/builders/nightly-
internal/builds/50/steps/shell_21/logs/stdio

6. "perl isn't executable!":
http://autobuilder.yoctoproject.org:8010/builders/nightly-
external/builds/60/steps/shell_26/logs/stdio

I haven't looked at these three.

Quoted 5 lines

7. -live images still being built:
Beth was fixing (has fixed?) this. It did bring up an interesting issue in that -k makes the build look like it succeeded - have filed bug #1322 for this one.
http://autobuilder.yoctoproject.org:8010/builders/crownbay-
noemgd/builds/27/steps/shell_10/logs/stdio

Beth should have fixed the AB issue? The bug is a lower priority but we'll get to that. I merged the change to make atom-pc generate live images.

Quoted 4 lines

8. meta-toolchain "/bin/sh" dependency errors:
Richard thinks he knows what's wrong here but is unsure of the fix.
http://autobuilder.yoctoproject.org:8010/builders/nightly-external-
toolchain/builds/55/steps/shell_14/logs/stdio

Fix should be in master.

Quoted 4 lines

9. aclocal .m4 file issue (bug #861)
Richard has some potential suggestions, actual fix still needed though.
http://autobuilder.yoctoproject.org:8010/builders/nightly-
external/builds/60/steps/shell_14/logs/stdio

Fix should be in master.

Quoted 3 lines

10. beagleboard libzypp failure
Richard has a patch for part of it, would like Mark to look into the rest:
http://bugzilla.pokylinux.org/show_bug.cgi?id=1313

Partial fix in master, waiting on the other part from Mark.

Cheers,

Richard