Pull request: u-boot-imx

Hi Albert,

please pull from u-boot-imx:

The following changes since commit 5557e86bb0793012057d5462976c2a902bc629ac:

omap4: increase SRAM budget to fix build error (2011-08-21 10:14:51 +0200)

are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master

David Jander (1):
ARM: MX51: PLL errata workaround

Fabio Estevam (1):
mx53: ddr3: Update DD3 initialization

Stefano Babic (20):
MX35: MX35PDK: support additional RAM on CSD1
MX: MX35 / MX5: uniform clock command with powerpc
IMX: uniform GPIO interface using GPIO framework
MX25: make use of GPIO framework for MX25 processor
MX31: make use of GPIO framework for MX31 processor
MX5: make use of GPIO framework for MX5 processor
MX35: make use of GPIO framework for MX35 processor
MX31: QONG: make use of GPIO framework
MX5: efikamx: make use of GPIO framework
MX25: zmx25: make use of GPIO framework
MX5: mx53ard: make use of GPIO framework
MX5: mx53smd: make use of GPIO framework
MX5: vision2: make use of GPIO framework
MX5: mx53evk: make use of GPIO framework
MX5: mx53loco: make use of GPIO framework
MX35: mx35pdk: make use of GPIO framework
MX5: mx51evk: make use of GPIO framework
MX31: mx31ads: make use of GPIO framework
MX31: imx31_litekit: make use of GPIO framework
IMX: scb9328: drop warnings

 arch/arm/cpu/arm1136/mx35/generic.c                |    4 +-
 arch/arm/cpu/armv7/mx5/clock.c                     |    4 +-
 arch/arm/cpu/armv7/mx5/lowlevel_init.S             |   38 +++++++++++
 .../arm/include/asm/arch-mx25/gpio.h               |   42 ++++--------
 arch/arm/include/asm/arch-mx25/imx-regs.h          |   12 ---
 arch/arm/include/asm/arch-mx31/gpio.h              |   35 ++++++++++
 arch/arm/include/asm/arch-mx31/imx-regs.h          |    7 --
 arch/arm/include/asm/arch-mx35/gpio.h              |   40 +++++++++++
 arch/arm/include/asm/arch-mx5/gpio.h               |   35 ++++++++++
 arch/arm/include/asm/arch-mx5/imx-regs.h           |   12 ++--
 board/davedenx/qong/fpga.c                         |   10 ++--
 board/davedenx/qong/qong.c                         |   36 +++++-----
 board/efikamx/efikamx.c                            |   62
+++++++-----------
 board/freescale/mx35pdk/lowlevel_init.S            |    9 ++-
 board/freescale/mx35pdk/mx35pdk.c                  |   22 +++++--
 board/freescale/mx51evk/mx51evk.c                  |   18 ++----
 board/freescale/mx53ard/imximage_dd3.cfg           |    6 +-
 board/freescale/mx53ard/mx53ard.c                  |    8 +-
 board/freescale/mx53evk/mx53evk.c                  |    6 +-
 board/freescale/mx53loco/imximage.cfg              |    6 +-
 board/freescale/mx53loco/mx53loco.c                |    6 +-
 board/freescale/mx53smd/imximage.cfg               |    6 +-
 board/freescale/mx53smd/mx53smd.c                  |    4 +-
 board/scb9328/scb9328.c                            |    2 +-
 board/syteco/zmx25/zmx25.c                         |   35 ++++------
 board/ttcontrol/vision2/vision2.c                  |   71
++++++++------------
 doc/README.imx5                                    |   17 +++++
 drivers/gpio/mxc_gpio.c                            |   51 +++++++++++++-
 drivers/spi/mxc_spi.c                              |    8 +-
 include/configs/imx31_litekit.h                    |    1 +
 include/configs/mx31ads.h                          |    1 +
 include/configs/mx35pdk.h                          |    7 +-
 include/configs/mx51evk.h                          |    1 +
 33 files changed, 383 insertions(+), 239 deletions(-)
 rename include/mxc_gpio.h => arch/arm/include/asm/arch-mx25/gpio.h (59%)
 create mode 100644 arch/arm/include/asm/arch-mx31/gpio.h
 create mode 100644 arch/arm/include/asm/arch-mx35/gpio.h
 create mode 100644 arch/arm/include/asm/arch-mx5/gpio.h
 create mode 100644 doc/README.imx5

Thanks,
Stefano

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================

Hi Stefano,

Le 26/08/2011 16:23, Stefano Babic a ?crit :

Applied (after rebasing) to u-boot-arm/master, thanks !

Amicalement,

Albert.