Screen corruption regression from 3.0 to 3.1rc4
In the free game simutrans, in fullscreen mode I see the following problem:
The lower about 2 cm of the screen don't update. They are black or carry the image from the game startup screen. They flicker once in a while, but otherwise the image stays the same.
lspci output:
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c)
glxinfo:
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) 965GM
OpenGL version string: 2.1 Mesa 7.11
Any ideas what I can do about this problem? Is it a known issue?
Philipp
Am 31.08.2011 08:43, schrieb Philipp Klaus Krause:
Quoted 11 lines
In the free game simutrans, in fullscreen mode I see the following problem:
The lower about 2 cm of the screen don't update. They are black or carry the image from the game startup screen. They flicker once in a while, but otherwise the image stays the same.lspci output:
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c)
Quoted 8 lines
glxinfo:
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) 965GM
OpenGL version string: 2.1 Mesa 7.11Any ideas what I can do about this problem? Is it a known issue?
Philipp
This regression was introduced between 3.0 and 3.1rc1.
Philipp
Quoted 18 lines · Philipp Klaus Krause
Am 31.08.2011 08:43, schrieb Philipp Klaus Krause:
Quoted 17 lines
In the free game simutrans, in fullscreen mode I see the following problem:
The lower about 2 cm of the screen don't update. They are black or carry the image from the game startup screen. They flicker once in a while, but otherwise the image stays the same.lspci output:
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c)glxinfo:
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) 965GM
OpenGL version string: 2.1 Mesa 7.11Any ideas what I can do about this problem? Is it a known issue?
Lately there seem to be a few reports of "my screen doesn't update anymore". One thing that seems to (temporary) fix the problem is to switch to the kernel console and back to X. Does that help in your case?
Quoted 1 line
This regression was introduced between 3.0 and 3.1rc1.
If it's a kernel regression, can you please try to bisect it?
Thanks a lot,
Daniel
Signature · 2 lines
Daniel Vetter [email protected] - +41 (0) 79 364 57 48 - http://blog.ffwll.ch
Am 03.09.2011 12:43, schrieb Daniel Vetter:
Quoted 5 lines
Lately there seem to be a few reports of "my screen doesn't update anymore". One thing that seems to (temporary) fix the problem is to switch to the kernel console and back to X. Does that help in your case?
Yes. Temporary: For a few seconds, then the lower part of the screen freezes again. Taking a screenshot using import has the same effect.
Philipp
Quoted 4 lines
Quoted 1 line
This regression was introduced between 3.0 and 3.1rc1.
If it's a kernel regression, can you please try to bisect it?
I might have a look at it when I find the time to do so.
Philipp
Quoted 6 lines · Philipp Klaus Krause
Quoted 4 lines
Quoted 1 line
This regression was introduced between 3.0 and 3.1rc1.
If it's a kernel regression, can you please try to bisect it?
I might have a look at it when I find the time to do so.
That would be very useful. Your description sounds like damage isn't properly flushed somewhere in the X server. This being caused by a kernel changes is rather strange, so more information about the actual culprit is certainly useful.
Thanks, Daniel
Signature · 2 lines
Daniel Vetter [email protected] - +41 (0) 79 364 57 48 - http://blog.ffwll.ch
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Am 03.09.2011 12:52, schrieb Philipp Klaus Krause:
Quoted 14 lines
Am 03.09.2011 12:43, schrieb Daniel Vetter:
Quoted 5 lines
Lately there seem to be a few reports of "my screen doesn't update anymore". One thing that seems to (temporary) fix the problem is to switch to the kernel console and back to X. Does that help in your case?
Yes. Temporary: For a few seconds, then the lower part of the screen freezes again. Taking a screenshot using import has the same effect.
Philipp
Quoted 8 lines
Quoted 4 lines
Quoted 1 line
This regression was introduced between 3.0 and 3.1rc1.
If it's a kernel regression, can you please try to bisect it?
I might have a look at it when I find the time to do so.
Philipp
Here's the output from git-bisect:
d74362c9e45689d8d7e3d4bcf6681c4358ef4f2e is the first bad commit commit d74362c9e45689d8d7e3d4bcf6681c4358ef4f2e
Author: Keith Packard <[email protected]> Date: Thu Jul 28 14:47:14 2011 -0700
drm/i915: Flush other plane register writes
Writes to the plane control register are buffered in the chip until a write to the DSPADDR (pre-965) or DSPSURF (post-965) register occurs.
This patch adds flushes in:
intel_enable_plane
gen6_init_clock_gating
ivybridge_init_clock_gating
:040000 040000 68666ff438ff2b9890a72914905b4aadf53e23ef101e78df34814a3661c87e9e44d10761d0676d7a M drivers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAk5mG+0ACgkQbtUV+xsoLpqAegCfYBHlmYhMr048fEY6MXZcn9tn VEAAn0KYFNL8xiFpSoJnrF4G7zNoEMF2
=Lkwf
-----END PGP SIGNATURE-----
Quoted 4 lines · Philipp Klaus Krause
Here's the output from git-bisect:
d74362c9e45689d8d7e3d4bcf6681c4358ef4f2eis the first bad commit commitd74362c9e45689d8d7e3d4bcf6681c4358ef4f2e
Quoted 8 lines
Author: Keith Packard <[email protected]> Date: Thu Jul 28 14:47:14 2011 -0700drm/i915: Flush other plane register writes
Writes to the plane control register are buffered in the chip until a write to the DSPADDR (pre-965) or DSPSURF (post-965) register occurs.
Makes me wonder if this is some interaction between page flipping and frame buffer compression. Could you try turning it off with the following kernel command line parameter?
i915.i915_enable_fbc=0
Signature · 1 line
[email protected]
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Am 06.09.2011 17:53, schrieb Keith Packard:
Quoted 15 lines · Philipp Klaus Krause
Quoted 5 lines
Here's the output from git-bisect:
d74362c9e45689d8d7e3d4bcf6681c4358ef4f2eis the first bad commit commitd74362c9e45689d8d7e3d4bcf6681c4358ef4f2eQuoted 8 lines
Author: Keith Packard <[email protected]> Date: Thu Jul 28 14:47:14 2011 -0700drm/i915: Flush other plane register writes
Writes to the plane control register are buffered in the chip until a write to the DSPADDR (pre-965) or DSPSURF (post-965) register occurs.
Quoted 6 lines
Makes me wonder if this is some interaction between page flipping and frame buffer compression. Could you try turning it off with the following kernel command line parameter?
i915.i915_enable_fbc=0
The problem goes away with i915.i915_enable_fbc=0. I'll probably use that workaround until the issue is fixed.
Philipp
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAk5npvkACgkQbtUV+xsoLpoRPACguEnn/k9CBlIxXBNVhD1cO1/B tfEAn0udhnXMKnop2i1cEY8SztLN6RZT
=TjEO
-----END PGP SIGNATURE-----
Quoted 25 lines · Philipp Klaus Krause
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1Am 06.09.2011 17:53, schrieb Keith Packard:
Quoted 1 line
On Tue, 06 Sep 2011 15:11:12 +0200, Philipp Klaus Krause <[email protected]>
Quoted 11 lines · wrote:
Quoted 11 lines
Here's the output from git-bisect:
d74362c9e45689d8d7e3d4bcf6681c4358ef4f2eis the first bad commit commitd74362c9e45689d8d7e3d4bcf6681c4358ef4f2eAuthor: Keith Packard <[email protected]> Date: Thu Jul 28 14:47:14 2011 -0700drm/i915: Flush other plane register writes
Writes to the plane control register are buffered in the chip until
a
Quoted 7 lines
Quoted 2 lines
write to the DSPADDR (pre-965) or DSPSURF (post-965) register occurs.
Makes me wonder if this is some interaction between page flipping and frame buffer compression. Could you try turning it off with the following kernel command line parameter?
Quoted 6 lines
Quoted 2 lines
i915.i915_enable_fbc=0The problem goes away with i915.i915_enable_fbc=0. I'll probably use that workaround until the issue is fixed.
Hi,
just to help me keep track of this, is there a bug on bugzilla about it?
Signature · 2 lines
Eugeni Dodonov <http://eugeni.dodonov.net/>
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Am 08.09.2011 15:43, schrieb Eugeni Dodonov:
Quoted 4 lines
Hi,
just to help me keep track of this, is there a bug on bugzilla about it?
I only reported it on the intel-gfx list. Maybe someone reported the issue at bugzilla before, but I don't know.
Philipp