Skip to contentSkip to conversation

MX25: tx25: Cleanup tx25.h config

PATCH New Fabio Estevam 2 participants 2 messages Aug 30, 2011 – Sep 2, 2011

lore
Share & tools
lore

Fabio Estevam

author
#0 lore raw

PATCH 1/1 MX25: tx25: Cleanup tx25.h config

Cleanup tx25.h by removing unnecessary defines and by removing unneeded "1"'s.

Signed-off-by Fabio Estevam <[email protected]>
---
 include/configs/tx25.h |   14 ++++++--------
 1 files changed, 6 insertions(+), 8 deletions(-)
include/configs/tx25.h +6 -8
index cb604a5..deeba8a 100644
@@ -25,9 +25,7 @@
 /*
  * KARO TX25 board - SoC Configuration
  */
-#define CONFIG_ARM926EJS			/* arm926ejs CPU core */
 #define CONFIG_MX25
-#define CONFIG_TX25
 #define CONFIG_MX25_CLK32		32000	/* OSC32K frequency */
 #define CONFIG_SYS_HZ			1000
 

@@ -56,9 +54,9 @@
 
 #define CONFIG_DISPLAY_CPUINFO
 
-#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
+#define CONFIG_CMDLINE_TAG			/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS	
+#define CONFIG_INITRD_TAG		
 
 /*
  * Memory Info

@@ -85,8 +83,8 @@
 /*
  * Serial Info
  */
-#define CONFIG_MXC_UART		1
-#define CONFIG_SYS_MX25_UART1	1
+#define CONFIG_MXC_UART		
+#define CONFIG_SYS_MX25_UART1	
 #define CONFIG_CONS_INDEX	1	/* use UART0 for console */
 #define CONFIG_BAUDRATE		115200	/* Default baud rate */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

@@ -97,7 +95,7 @@
  * Flash & Environment
  */
 /* No NOR flash present */
-#define CONFIG_SYS_NO_FLASH	1
+#define CONFIG_SYS_NO_FLASH	
 #define	CONFIG_ENV_IS_IN_NAND
 #define	CONFIG_ENV_OFFSET	CONFIG_SYS_MONITOR_LEN
 #define CONFIG_ENV_SIZE		(128 * 1024)	/* 128 kB NAND block size */
Signature · 1 line
1.6.0.4
#1 lore raw

PATCH 1/1 MX25: tx25: Cleanup tx25.h config

Quoted 7 lines · Fabio Estevam

Cleanup tx25.h by removing unnecessary defines and by removing unneeded "1"'s.

Signed-off-by Fabio Estevam <[email protected]>
---
 include/configs/tx25.h |   14 ++++++--------
 1 files changed, 6 insertions(+), 8 deletions(-)

Applied to u-boot-imx (fix), thanks.

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================