BeagleBoard: turn off clocks in ehci_stop

1/3

---
 board/ti/beagle/beagle.c |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)
index 7768901..a958545 100644
@@ -356,6 +356,12 @@ int ehci_hcd_stop(void)
 	pr_debug("Resetting OMAP3 EHCI\n");
 	omap_set_gpio_dataout(GPIO_PHY_RESET, 0);
 	writel(OMAP_UHH_SYSCONFIG_SOFTRESET, OMAP3_UHH_BASE + OMAP_UHH_SYSCONFIG);
+	/* disable USB clocks */
+	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+	sr32(&prcm_base->iclken_usbhost, 0, 1, 0);
+	sr32(&prcm_base->fclken_usbhost, 0, 2, 0);
+	sr32(&prcm_base->iclken3_core, 2, 1, 0);
+	sr32(&prcm_base->fclken3_core, 2, 1, 0);
 	return 0;
 }
 

1.7.1
---
 board/ti/beagle/beagle.c       |   56 ++++++++++++++++++++++++++++++++++++++++
 include/configs/omap3_beagle.h |    7 ++++-
 2 files changed, 62 insertions(+), 1 deletions(-)
index a958545..8dc8dfa 100644
@@ -50,6 +50,7 @@ extern struct ehci_hccr *hccr;
 extern volatile struct ehci_hcor *hcor;
 #endif
 #include "beagle.h"
+#include <command.h>
 
 #define pr_debug(fmt, args...) debug(fmt, ##args)
 

@@ -446,3 +447,58 @@ int ehci_hcd_init(void)
 }
 
 #endif /* CONFIG_USB_EHCI */
+
+/*
+ * This command returns the status of the user button on beagle xM
+ * Input - none
+ * Returns - 	1 if button is held down
+ *		0 if button is not held down
+ */
+int do_userbutton (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int     button = 0;
+	int	gpio;
+
+	/*
+	 * pass address parameter as argv[0] (aka command name),
+	 * and all remaining args
+	 */
+	switch (get_board_revision()) {
+	case REVISION_AXBX:
+	case REVISION_CX:
+	case REVISION_C4:
+		gpio = 7;
+		break;
+	case REVISION_XM_A:
+	case REVISION_XM_B:
+	case REVISION_XM_C:
+	default:
+		gpio = 4;
+		break;
+	}
+	omap_request_gpio(gpio);
+	omap_set_gpio_direction(gpio, 1);
+	printf("The user button is currently ");
+	if(omap_get_gpio_datain(gpio))
+	{
+		button = 1;
+		printf("PRESSED.\n");
+	}
+	else
+	{
+		button = 0;
+		printf("NOT pressed.\n");
+	}
+
+	omap_free_gpio(gpio);
+
+	return !button;
+}
+
+/* -------------------------------------------------------------------- */
+
+U_BOOT_CMD(
+	userbutton, CONFIG_SYS_MAXARGS, 1,	do_userbutton,
+	"Return the status of the BeagleBoard USER button",
+	""
+);

index c41d48e..a494f99 100644
@@ -227,7 +227,8 @@
 		"omapdss.def_disp=${defaultdisplay} " \
 		"root=${nandroot} " \
 		"rootfstype=${nandrootfstype}\0" \
-	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
+	"bootenv=uEnv.txt\0" \
+	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
 	"importbootenv=echo Importing environment from mmc ...; " \
 		"env import -t $loadaddr $filesize\0" \
 	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \

@@ -241,8 +242,12 @@
 
 #define CONFIG_BOOTCOMMAND \
 	"if mmc rescan ${mmcdev}; then " \
+		"if userbutton; then " \
+			"setenv bootenv user.txt;" \
+		"fi;" \
 		"echo SD/MMC found on device ${mmcdev};" \
 		"if run loadbootenv; then " \
+			"echo Loaded environment from ${bootenv};" \
 			"run importbootenv;" \
 		"fi;" \
 		"if test -n $uenvcmd; then " \

1.7.1
Albert.
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The average woman would rather have beauty than brains,  because  the
average man can see better than he can think.
Albert.
Albert.
---
 board/ti/beagle/beagle.c |   24 +++++++++++++
 board/ti/beagle/beagle.h |   86 ++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 110 insertions(+), 0 deletions(-)
index 8dc8dfa..13fe39b 100644
@@ -165,6 +165,28 @@ unsigned int get_expansion_id(void)
 }
 
 /*
+ * Configure DSS to display background color on DVID
+ * Configure VENC to display color bar on S-Video
+ */
+void beagle_display_init(void)
+{
+	omap3_dss_venc_config(&venc_config_std_tv, VENC_HEIGHT, VENC_WIDTH);
+	switch (get_board_revision()) {
+	case REVISION_AXBX:
+	case REVISION_CX:
+	case REVISION_C4:
+		omap3_dss_panel_config(&dvid_cfg);
+		break;
+	case REVISION_XM_A:
+	case REVISION_XM_B:
+	case REVISION_XM_C:
+	default:
+		omap3_dss_panel_config(&dvid_cfg_xm);
+		break;
+	}
+}
+
+/*
  * Routine: misc_init_r
  * Description: Configure board specific parts
  */

@@ -324,6 +346,8 @@ int misc_init_r(void)
 		GPIO15 | GPIO14 | GPIO13 | GPIO12), &gpio5_base->oe);
 
 	dieid_num_r();
+	beagle_display_init();
+	omap3_dss_enable();
 
 	return 0;
 }

1.7.1

BeagleBoard: turn off clocks in ehci_stop

Joel A Fernandes

Joel A Fernandes

Albert ARIBAUD

Wolfgang Denk

Joel A Fernandes

Albert ARIBAUD

Kridner

Joel A Fernandes

Joel A Fernandes

Jason Kridner

Joel A Fernandes

Joel A Fernandes

Joel A Fernandes

Joel A Fernandes