Skip to contentSkip to conversation

MX31: Improve readability for reset cause

PATCH New Fabio Estevam 2 participants 2 messages Sep 16, 2011 – Sep 19, 2011 Arm (32-bit)

lore
Share & tools
lore

Fabio Estevam

author
#0 lore raw

PATCH 1/1 MX31: Improve readability for reset cause

Currently the reset cause is printed like:
CPU: Freescale i.MX31 rev 2.0 at 531 MHz.Reset cause: POR

Improve readability by adding a new line like it is done on other i.MX boards.

Signed-off-by Fabio Estevam <[email protected]>
---
 arch/arm/cpu/arm1136/mx31/generic.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
arch/arm/cpu/arm1136/mx31/generic.c +1 -1
index e3a4d1b..c6def5d 100644
@@ -180,7 +180,7 @@ int print_cpuinfo (void)
 {
 	u32 srev = get_cpu_rev();
 
-	printf("CPU:   Freescale i.MX31 rev %d.%d%s at %d MHz.",
+	printf("CPU:   Freescale i.MX31 rev %d.%d%s at %d MHz.\n",
 			(srev & 0xF0) >> 4, (srev & 0x0F),
 			((srev & 0x8000) ? " unknown" : ""),
 			mx31_get_mcu_main_clk() / 1000000);
Signature · 1 line
1.6.0.4
#1 lore raw

PATCH 1/1 MX31: Improve readability for reset cause

Quoted 15 lines · Fabio Estevam

Currently the reset cause is printed like:
CPU: Freescale i.MX31 rev 2.0 at 531 MHz.Reset cause: POR

Improve readability by adding a new line like it is done on other i.MX boards.

Signed-off-by Fabio Estevam <[email protected]>
---
 arch/arm/cpu/arm1136/mx31/generic.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
arch/arm/cpu/arm1136/mx31/generic.c +0 -0
index e3a4d1b..c6def5d 100644

arch/arm/cpu/arm1136/mx31/generic.c int print_cpuinfo (void) · line 186

Quoted 8 lines
arch/arm/cpu/arm1136/mx31/generic.c +1 -1
@@ -180,7 +180,7 @@ int print_cpuinfo (void)
 {
 	u32 srev = get_cpu_rev();
 
-	printf("CPU:   Freescale i.MX31 rev %d.%d%s at %d MHz.",
+	printf("CPU:   Freescale i.MX31 rev %d.%d%s at %d MHz.\n",
 			(srev & 0xF0) >> 4, (srev & 0x0F),
 			((srev & 0x8000) ? " unknown" : ""),
 			mx31_get_mcu_main_clk() / 1000000);

Applied to u-boot-imx, next branch, thanks.

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================