linux-next: Tree for Sept 20

Hi all,

The linux-next tree is now available from
git://github.com/sfrothwell/linux-next.git as a temporary measure while the kernel.org servers are unavailable.

The powerpc allyesconfig build still fails today.

Changes since 20110919:

The s5p tree lost a merge fixup patch.

The input tree still has its build failure for which I reverted a commit.

The wireless tree gained conflicts against Linus' tree.

The mfd tree lost its build failure.

The regmap tree gained a conflict against the mfd tree.

The staging tree gained a conflict against Linus' tree.

----------------------------------------------------------------------------

I have created today's linux-next tree at
git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
(patches at http://www.kernel.org/pub/linux/kernel/v2.6/next/ ). If you are tracking the linux-next tree using git, you should not use "git pull" to do so as that will try to merge the new linux-next release with the old one. You should use "git fetch" as mentioned in the FAQ on the wiki (see below).

You can see which trees have been included by looking in the Next/Trees file in the source. There are also quilt-import.log and merge.log files in the Next directory. Between each merge, the tree was built with a ppc64_defconfig for powerpc and an allmodconfig for x86_64. After the final fixups (if any), it is also built with powerpc allnoconfig (32 and 64 bit), ppc44x_defconfig and allyesconfig (minus CONFIG_PROFILE_ALL_BRANCHES - this fails its final link) and i386, sparc and sparc64 defconfig. These builds also have CONFIG_ENABLE_WARN_DEPRECATED, CONFIG_ENABLE_MUST_CHECK and CONFIG_DEBUG_INFO disabled when necessary.

Below is a summary of the state of the merge.

We are up to 200 trees (counting Linus' and 27 trees of patches pending for Linus' tree), more are welcome (even if they are currently empty). Thanks to those who have contributed, and to those who haven't, please do.

Status of my local build tests will be at
http://kisskb.ellerman.id.au/linux-next . If maintainers want to give advice about cross compilers/configs that work, we are always open to add more builds.

Thanks to Randy Dunlap for doing many randconfig builds.

There is a wiki covering stuff to do with linux-next at
http://linux.f-seidel.de/linux-next/pmwiki/ . Thanks to Frank Seidel.

Cheers,
Stephen Rothwell                    [email protected]

$ git checkout master
$ git reset --hard stable
Merging origin/master
Merging fixes/fixes
Merging kbuild-current/rc-fixes
Merging arm-current/master
Merging m68k-current/for-linus
Merging powerpc-merge/merge
Merging 52xx-and-virtex-current/powerpc/merge
Merging sparc-current/master
Merging scsi-rc-fixes/master
Merging net-current/master
Merging sound-current/for-linus
Merging pci-current/for-linus
Merging wireless-current/master
Merging driver-core.current/driver-core-linus
Merging tty.current/tty-linus
Merging usb.current/usb-linus
Merging staging.current/staging-linus
Merging cpufreq-current/fixes
Merging input-current/for-linus
Merging md-current/for-linus
Merging audit-current/for-linus
Merging crypto-current/master
Merging ide-curent/master
Merging dwmw2/master
Merging sh-current/sh-fixes-for-linus
Merging rmobile-current/rmobile-fixes-for-linus
Merging devicetree-current/devicetree/merge
Merging spi-current/spi/merge
Merging arm/for-next
Merging arm-lpae/for-next
CONFLICT (content): Merge conflict in arch/arm/include/asm/page.h
CONFLICT (content): Merge conflict in arch/arm/include/asm/pgalloc.h
CONFLICT (content): Merge conflict in arch/arm/include/asm/pgtable-hwdef.h
CONFLICT (content): Merge conflict in arch/arm/include/asm/pgtable.h
CONFLICT (content): Merge conflict in arch/arm/include/asm/tlb.h
CONFLICT (content): Merge conflict in arch/arm/kernel/head.S
CONFLICT (content): Merge conflict in arch/arm/kernel/sleep.S
CONFLICT (content): Merge conflict in arch/arm/mm/dma-mapping.c
CONFLICT (content): Merge conflict in arch/arm/mm/mmu.c
Merging arm-soc/for-next
CONFLICT (add/add): Merge conflict in Documentation/devicetree/bindings/arm/l2cc.txt
CONFLICT (content): Merge conflict in arch/arm/include/asm/hardware/cache-l2x0.h
CONFLICT (delete/modify): arch/arm/mach-at91/board-usb-a9260.c deleted in arm-soc/for-next and modified in HEAD. Version HEAD of arch/arm/mach-at91/board-usb-a9260.c left in tree.
CONFLICT (content): Merge conflict in arch/arm/mach-msm/board-msm8x60.c
CONFLICT (content): Merge conflict in arch/arm/mach-mxs/include/mach/gpio.h
CONFLICT (content): Merge conflict in arch/arm/mach-u300/Makefile.boot
CONFLICT (content): Merge conflict in arch/arm/mm/cache-l2x0.c
CONFLICT (content): Merge conflict in arch/arm/plat-mxc/include/mach/gpio.h
$ git rm -f arch/arm/mach-at91/board-usb-a9260.c
Applying: arm-soc: merge fixup for fixup/reserve being added to MACHINE descriptions
Merging at91/at91-next
Merging davinci/davinci-next
Merging i.MX/for-next
CONFLICT (content): Merge conflict in arch/arm/mach-imx/Makefile
Merging linux-spec/for-next
Merging omap/for-next
Merging pxa/for-next
Merging samsung/next-samsung
Merging s5p/for-next
CONFLICT (delete/modify): arch/arm/mach-exynos4/mach-smdkc210.c deleted in s5p/for-next and modified in HEAD. Version HEAD of arch/arm/mach-exynos4/mach-smdkc210.c left in tree.
$ git rm -f arch/arm/mach-exynos4/mach-smdkc210.c
Merging tegra/for-next
Merging ux500-core/ux500-core
Merging xilinx/arm-next
Merging blackfin/for-linus
Merging cris/for-next
Merging quilt/hexagon
Merging ia64/test
Merging m68k/for-next
Merging m68knommu/for-next
Merging microblaze/next
Merging mips/mips-for-linux-next
Merging openrisc/for-upstream
Merging parisc/for-next
Merging powerpc/next
Merging 4xx/next
Merging 52xx-and-virtex/powerpc/next
Merging galak/next
Merging s390/features
Merging sh/sh-latest
Merging rmobile/rmobile-latest
Merging sparc/master
Merging tile/master
Merging unicore32/unicore32
Merging xtensa/master
Merging ceph/for-next
Merging cifs/master
Merging configfs/linux-next
Merging ecryptfs/next
Merging ext3/for_next
Merging ext4/dev
Merging fatfs/master
Merging fuse/for-next
Merging gfs2/master
Merging hfsplus/for-next
Merging jfs/next
Merging logfs/master
Merging nfs/linux-next
Merging nfsd/nfsd-next
Merging nilfs2/for-next
Merging ocfs2/linux-next
Merging omfs/for-next
Merging squashfs/master
Merging udf/for_next
Merging v9fs/for-next
CONFLICT (content): Merge conflict in net/9p/trans_virtio.c
Merging ubifs/linux-next
Merging xfs/master
CONFLICT (content): Merge conflict in fs/xfs/xfs_aops.c
CONFLICT (content): Merge conflict in fs/xfs/xfs_super.c
Merging vfs/for-next
Merging vfs-scale/vfs-scale-working
Merging pci/linux-next
Merging hid/for-next
Merging quilt/i2c
Merging bjdooks-i2c/next-i2c
Merging quilt/jdelvare-hwmon
Merging hwmon-staging/hwmon-next
Merging quilt/kernel-doc
Merging docs/docs-move
Merging v4l-dvb/master
Merging kbuild/for-next
Merging kconfig/for-next
Merging ide/master
Merging libata/NEXT
Merging infiniband/for-next
Merging acpi/test
Merging idle-test/idle-test
Merging powertools/tools-test
Merging cpupowerutils/master
Merging ieee1394/for-next
Merging ubi/linux-next
Merging dlm/next
Merging swiotlb/master
Merging ibft/master
Merging scsi/master
Merging iscsi-target/for-next
Merging slave-dma/next
Merging async_tx/next
Merging net/master
CONFLICT (content): Merge conflict in MAINTAINERS
CONFLICT (delete/modify): arch/powerpc/configs/40x/hcu4_defconfig deleted in HEAD and modified in net/master. Version net/master of arch/powerpc/configs/40x/hcu4_defconfig left in tree.
CONFLICT (content): Merge conflict in drivers/net/Kconfig
CONFLICT (content): Merge conflict in drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
CONFLICT (content): Merge conflict in drivers/net/wireless/iwlwifi/iwl-pci.c
CONFLICT (content): Merge conflict in drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c
CONFLICT (content): Merge conflict in drivers/s390/cio/qdio_main.c
$ git rm -f arch/powerpc/configs/40x/hcu4_defconfig
Merging wireless/master
CONFLICT (content): Merge conflict in drivers/net/wireless/iwlwifi/iwl-pci.c
CONFLICT (content): Merge conflict in drivers/net/wireless/rt2x00/rt2800usb.c
CONFLICT (content): Merge conflict in drivers/net/wireless/wl12xx/main.c
Merging bluetooth/master
Merging mtd/master
Merging l2-mtd/master
CONFLICT (delete/modify): arch/arm/mach-at91/board-usb-a9260.c deleted in HEAD and modified in l2-mtd/master. Version l2-mtd/master of arch/arm/mach-at91/board-usb-a9260.c left in tree.
$ git rm -f arch/arm/mach-at91/board-usb-a9260.c
Merging crypto/master
Merging sound/for-next
CONFLICT (content): Merge conflict in arch/mips/alchemy/devboards/db1x00/platform.c
CONFLICT (content): Merge conflict in sound/mips/Kconfig
Merging sound-asoc/for-next
Merging cpufreq/next
Merging quilt/rr
Merging input/next
[master 248d74a] Revert "Input: gpio_keys - use of_property_read_u32()"
Merging input-mt/next
Merging lsm/for-next
Merging block/for-next
Merging quilt/device-mapper
Merging embedded/master
Merging firmware/master
Merging pcmcia/master
Merging battery/master
Merging leds/for-mm
CONFLICT (content): Merge conflict in drivers/leds/Kconfig
Merging backlight/for-mm
Merging mmc/mmc-next
Merging kgdb/kgdb-next
Merging slab/for-next
Merging uclinux/for-next
Merging md/for-next
Merging mfd/for-next
CONFLICT (content): Merge conflict in drivers/mfd/max8997.c
CONFLICT (content): Merge conflict in drivers/rtc/rtc-twl.c
Merging hdlc/hdlc-next
Merging drm/drm-next
Merging fbdev/fbdev-next
CONFLICT (content): Merge conflict in drivers/video/Kconfig
Merging viafb/viafb-next
Merging omap_dss2/for-next
Merging voltage/for-next
Merging security/next
CONFLICT (content): Merge conflict in fs/ocfs2/xattr.c
Merging selinux/master
Merging lblnet/master
Merging agp/agp-next
Merging watchdog/master
Merging bdev/master
Merging dwmw2-iommu/master
Merging iommu/next
Merging cputime/cputime
Merging osd/linux-next
Merging jc_docs/docs-next
Merging nommu/master
Merging trivial/for-next
CONFLICT (content): Merge conflict in Documentation/PCI/pci.txt
CONFLICT (content): Merge conflict in drivers/net/Kconfig
Merging audit/for-next
Merging pm/linux-next
CONFLICT (content): Merge conflict in arch/arm/mach-shmobile/board-ap4evb.c
Merging apm/for-next
Merging fsnotify/for-next
Merging irda/for-next
Merging i7core_edac/linux_next
Merging i7300_edac/linux_next
CONFLICT (content): Merge conflict in arch/x86/kernel/cpu/mcheck/mce.c
Merging devicetree/devicetree/next
CONFLICT (content): Merge conflict in drivers/of/base.c
Merging spi/spi/next
Merging gpio/gpio/next
Merging tip/auto-latest
Merging rcu/rcu/next
Merging kvm/linux-next
Merging oprofile/for-next
Merging ptrace/ptrace
Merging xen/upstream/xen
Merging xen-two/linux-next
Merging xen-pvhvm/linux-next
Merging edac-amd/for-next
Merging percpu/for-next
Merging workqueues/for-next
Merging sfi/sfi-test
Merging asm-generic/next
Merging drivers-x86/linux-next
Merging hwpoison/hwpoison
Merging sysctl/master
Merging namespace/master
Merging regmap/for-next
CONFLICT (content): Merge conflict in drivers/mfd/wm831x-spi.c
Merging driver-core/driver-core-next
CONFLICT (content): Merge conflict in arch/arm/plat-mxc/devices.c
Merging tty/tty-next
Merging usb/usb-next
Merging staging/staging-next
CONFLICT (content): Merge conflict in drivers/staging/comedi/drivers/ni_labpc.c
CONFLICT (delete/modify): drivers/staging/rtl8192e/r8192E_core.c deleted in staging/staging-next and modified in HEAD. Version HEAD of drivers/staging/rtl8192e/r8192E_core.c left in tree.
CONFLICT (content): Merge conflict in drivers/staging/xgifb/XGI_main_26.c
$ git rm -f drivers/staging/rtl8192e/r8192E_core.c
Merging bkl-config/config
Merging tmem/linux-next
Merging writeback/next
Merging arm-dt/devicetree/arm-next
Merging moduleh/module.h-split
CONFLICT (content): Merge conflict in arch/arm/mach-bcmring/mm.c
CONFLICT (content): Merge conflict in drivers/s390/char/vmur.c
CONFLICT (content): Merge conflict in drivers/scsi/libfc/fc_lport.c
CONFLICT (content): Merge conflict in include/linux/dmaengine.h
Applying: dm: use export.h instead of module.h where possible
Applying: block: bsg-lib.c needs export.h not module.h
Applying: PM: EXPORT_SYMBOL needs export.h
Merging kvmtool/master
CONFLICT (content): Merge conflict in include/net/9p/9p.h
Merging scsi-post-merge/merge-base:master
$ git checkout akpm
Applying: When no floppy is found the module code can be released while a timer
Applying: Fix kconfig unmet dependency warning.  BACKLIGHT_CLASS_DEVICE depends on
Applying: The parameter's origin type is long.  On an i386 architecture, it can
Applying: Since the commit below which added O_PATH support to the *at() calls, the
Applying: Add support for Aspire 1410 BIOS v1.3314.  Fixes the following error:
Applying: This makes the iris driver use the platform API, so it is properly exposed
Applying: On x86_32 casting the unsigned int result of get_random_int() to long may
Applying: This new driver replaces the old PCEngines Alix 2/3 LED driver with a new
Applying: Cc: Ed Wildgoose <[email protected]>
Applying: Replace the bubble sort in sanitize_e820_map() with a call to the generic
Applying: The x86 timer interrupt handler is the only handler not traced in the
Applying: The current interrupt traces from irq_handler_entry and irq_handler_exit
Applying: Don't allow everybody to use a modem.
Applying: The address limit is already set in flush_old_exec() so this
Applying: A call to va_copy() should always be followed by a call to va_end() in the
Applying: Don't dereference em if it's NULL or an error pointer.
Applying: Some messing with error codes to return 0 on out id's and match
Applying: kbuf is a buffer that is local to this function, so all of the error paths
Applying: fb_set_suspend() must be called with the console semaphore held, which
Applying: hwmon was using an idr with a NULL pointer, so convert to an
Applying: A straightforward looking use of idr for a device id.
Applying: The address limit is already set in flush_old_exec() so this
Applying: The address limit is already set in flush_old_exec() so this
Applying: Add new check (assert_init) to make sure objects are initialized and
Applying: del_timer_sync() calls debug_object_assert_init() to assert that a timer
Applying: ext4_{set,clear}_bit() is defined as __test_and_{set,clear}_bit_le() for
Applying: The dqc_bitmap field of struct ocfs2_local_disk_chunk is 32-bit aligned,
Applying: The address limit is already set in flush_old_exec() so those calls to
Applying: When do pci remove/rescan on system that have more iommus, got
Applying: The current implementation of dmi_name_in_vendors() is an invitation to
Applying: For headers that get exported to userland and make use of u32 style
Applying: Fix sparse warnings of right shift bigger than source value size:
Applying: We leak in drivers/scsi/aacraid/commctrl.c::aac_send_raw_srb() :
Applying: Some mangling of errors was necessary to maintain current interface.
Applying: This does involve additional use of the spin lock in idr.c.  Is this an
Applying: Instead of open coding this function use kstrtoul_from_user() directly.
Applying: brd_make_request() always returns 0, which doesn't make much sense.
Applying: The address limit is already set in flush_old_exec() so this assignment of
Applying: Unbreak the alpha build.
Applying: Unbreak alpha build.
Applying: Unbreak alpha build.
Applying: When we get corruption reports, it's useful to see if the kernel was
Applying: When we get corruption reports, it's useful to see if the kernel was
Applying: The basic idea behind cross memory attach is to allow MPI programs doing
Applying: - Add x86_64 specific wire up
Applying: > You might get some speed benefit by optimising for the small copies
Applying: acct_isolated of compaction uses page_lru_base_type which returns only
Applying: Change ISOLATE_XXX macro with bitwise isolate_mode_t type.  Normally,
Applying: In async mode, compaction doesn't migrate dirty or writeback pages.  So,
Applying: In __zone_reclaim case, we don't want to shrink mapped page.  Nonetheless,
Applying: unmap_and_move() is one a big messy function.  Clean it up.
Applying: radix_tree_tag_get()'s BUG (when it sees a tag after saw_unset_tag) was
Applying: per-task block plug can reduce block queue lock contention and increase
Applying: The tracing ring-buffer used this function briefly, but not anymore.
Applying: After selecting a task to kill, the oom killer iterates all processes and
Applying: Add the leading word "tmpfs" to the Kconfig string to make it blindingly
Applying: When we get a bad_page bug report, it's useful to see what modules the
Applying: The nr_force_scan[] tuple holds the effective scan numbers for anon and
Applying: Some kernel components pin user space memory (infiniband and perf) (by
Applying: Add comments to explain the page statistics field in the mm_struct.
Applying: add missing ;
Applying: Testing from the XFS folk revealed that there is still too much I/O from
Applying: Lumpy reclaim worked with two passes - the first which queued pages for IO
Applying: Direct reclaim should never writeback pages.  For now, handle the
Applying: Direct reclaim should never writeback pages.  Warn if an attempt is made.
Applying: It is preferable that no dirty pages are dispatched for cleaning from the
Applying: Workloads that are allocating frequently and writing files place a large
Applying: When direct reclaim encounters a dirty page, it gets recycled around the
Applying: It's possible a zone watermark is ok when entering the balance_pgdat()
Applying: printk_ratelimit() should not be used, because it shares ratelimiting
Applying: memchr_inv() is mainly used to check whether the whole buffer is filled
Applying: Use newly introduced memchr_inv() for page verification.
Applying: A shrinker function can return -1, means that it cannot do anything
Applying: Use atomic-long operations instead of looping around cmpxchg().
Applying: massage atomic.h inclusions
Applying: The /proc/vmallocinfo shows information about vmalloc allocations in
Applying: Commit 645747462435 ("vmscan: detect mapped file pages used only once")
Applying: Logic added in commit 8cab4754d24a0 ("vmscan: make mapped executable pages
Applying: SPARC32 require access to the start address.  Add a new helper
Applying: With the NO_BOOTMEM symbol added architectures may now use the following
Applying: Using "- 1" relies on the old_end to be page aligned and PAGE_SIZE > 1,
Applying: This replaces ptep_clear_flush() with ptep_get_and_clear() and a single
Applying: This adds THP support to mremap (decreases the number of split_huge_page()
Applying: coding-style nitpicking
Applying: Cc: Andrea Arcangeli <[email protected]>
Applying: Signed-off-by: Andrew Morton <[email protected]>
Applying: vmstat_text is only available when PROC_FS or SYSFS is enabled.  This
Applying: reduce ifdeffery
Applying: Signed-off-by: Andy Shevchenko <[email protected]>
Applying: Make the security_inode_init_security() initxattrs arg const, to match the
Applying: The current implementation of the /dev/hpet driver couples opening the
Applying: smp_call_function() only lets all other CPUs execute a specific function,
Applying: auto_demotion_disable is called only for online CPUs.  For hotplugged
Applying: Enabling DEBUG_STRICT_USER_COPY_CHECKS causes the following warning:
Applying: Strict user copy checks are only really supported on x86_32 even though
Applying: The help text for this config is duplicated across the x86, parisc, and
Applying: s/lib-/obj-/ for usercopy.o
Applying: After an "unexpected" reboot, I found this Oops in my logs:
Applying: In the move of the lis3 driver, the hp_accel.c file got dropped from the
Applying: Add axis correction for HP EliteBook 2730p.
Applying: Add axis correction for HP EliteBook 8540w.
Applying: Add axis correction for HP ProBook 6555b.
Applying: Signed-off-by: Ilkka Koskinen <[email protected]>
Applying: Signed-off-by: Ilkka Koskinen <[email protected]>
Applying: Change exported functions to use the device given as parameter
Applying: Signed-off-by: Ilkka Koskinen <[email protected]>
Applying: We are enabling some power features on medfield.  To test suspend-2-RAM
Applying: We are enabling some power features on medfield.  To test suspend-2-RAM
Applying: We are enabling some power features on medfield.  To test suspend-2-RAM
Applying: Cc: Al Viro <[email protected]>
Applying: Add V2 of the LED driver for a single timer channel for the TPU hardware
Applying: include linux/module.h
Applying: The memory for struct led_trigger should be kfreed in the
Applying: Currently termination logic (\0 or \n\0) is hardcoded in _kstrtoull(),
Applying: Add support for slice by 8 to existing crc32 algorithm.  Also modify
Applying: don't include asm/msr.h
Applying: epoll can acquire recursively acquire ep->mtx on multiple "struct
Applying: Currently in oprofilefs, files that use ulong_fops mis-handle writes of
Applying: This is the one use of an ida that doesn't retry on receiving -EAGAIN.
Applying: One can get this information from minix/inode.c, but adding the
Applying: The memcg code sometimes uses "struct mem_cgroup *mem" and sometimes uses
Applying: Before calling schedule_timeout(), task state should be changed.
Applying: While back-porting Johannes Weiner's patch "mm: memcg-aware global
Applying: If somebody is touching data too early, it might be easier to diagnose a
Applying: Both mem_cgroup_charge_statistics() and mem_cgroup_move_account() were
Applying: On reading sysctl dirs we should return -EISDIR instead of -EINVAL.
Applying: Force this on for -next/mm testing purposes.
Applying: Expand root=PARTUUID=UUID syntax to support selecting a root partition by
Applying: After merging the akpm tree, today's linux-next build (lost of them)
Applying: The discovered bit in PGCCSR register indicates if the device has been
Applying: Add RapidIO mport driver for IDT TSI721 PCI Express-to-SRIO bridge device.
Applying: When I tried to send a patch to remove it, Andi told me we still need to
Applying: A default echo function has been provided so it is no longer an error when
Applying: This client driver allows you to use a GPIO pin as a source for PPS
Applying: remove unneeded cast of void*
Applying: Straightforward.  As an aside, the ida_init calls are not needed as far as
Applying: Simply creates one point to call the w1 interface.
Applying: Adds a nolock function to the w1 interface to avoid locking the
Applying: Fixes the deadlock when inserting and removing the ds2780.
Merging akpm

From: Randy Dunlap <[email protected]>

bcma/driver_chipcommon_pmu.c needs to include <linux/export.h>, so add it to the headers that are included by bcma_private.h.

Fixes these warnings:

drivers/bcma/driver_chipcommon_pmu.c:27:1: warning: data definition has no type or storage class drivers/bcma/driver_chipcommon_pmu.c:27:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' drivers/bcma/driver_chipcommon_pmu.c:27:1: warning: parameter names (without types) in function declaration drivers/bcma/driver_chipcommon_pmu.c:36:1: warning: data definition has no type or storage class drivers/bcma/driver_chipcommon_pmu.c:36:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' drivers/bcma/driver_chipcommon_pmu.c:36:1: warning: parameter names (without types) in function declaration drivers/bcma/driver_chipcommon_pmu.c:45:1: warning: data definition has no type or storage class drivers/bcma/driver_chipcommon_pmu.c:45:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' drivers/bcma/driver_chipcommon_pmu.c:45:1: warning: parameter names (without types) in function declaration drivers/bcma/driver_chipcommon_pmu.c:54:1: warning: data definition has no type or storage class drivers/bcma/driver_chipcommon_pmu.c:54:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' drivers/bcma/driver_chipcommon_pmu.c:54:1: warning: parameter names (without types) in function declaration

---
 drivers/bcma/bcma_private.h |    1 +
 1 file changed, 1 insertion(+)

@@ -7,6 +7,7 @@
 
 #include <linux/bcma/bcma.h>
 #include <linux/delay.h>
+#include <linux/export.h>
 
 #define BCMA_CORE_SIZE		0x1000
 

2011/9/20 Randy Dunlap <[email protected]>:

Please take a look at discussion in:
[PATCH -next] bcma: main.c needs to include <linux/slab.h> thread (by Andrew).

I believe that according to the discussion, such a includes should be done in .c files.

Andrew: can you comment? Am I right?

Rafał

Sure, I'll resubmit the patch.

Is there already a patch to remove <linux/delay.h> from bcma_private.h ?

bcma_private.h uses __init & __exit, so it should #include <linux/init.h> ...

~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***

From: Randy Dunlap <[email protected]>

bcma/driver_chipcommon_pmu.c needs to include <linux/export.h> to fix these warnings:

drivers/bcma/driver_chipcommon_pmu.c:27:1: warning: data definition has no type or storage class drivers/bcma/driver_chipcommon_pmu.c:27:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' drivers/bcma/driver_chipcommon_pmu.c:27:1: warning: parameter names (without types) in function declaration drivers/bcma/driver_chipcommon_pmu.c:36:1: warning: data definition has no type or storage class drivers/bcma/driver_chipcommon_pmu.c:36:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' drivers/bcma/driver_chipcommon_pmu.c:36:1: warning: parameter names (without types) in function declaration drivers/bcma/driver_chipcommon_pmu.c:45:1: warning: data definition has no type or storage class drivers/bcma/driver_chipcommon_pmu.c:45:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' drivers/bcma/driver_chipcommon_pmu.c:45:1: warning: parameter names (without types) in function declaration drivers/bcma/driver_chipcommon_pmu.c:54:1: warning: data definition has no type or storage class drivers/bcma/driver_chipcommon_pmu.c:54:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' drivers/bcma/driver_chipcommon_pmu.c:54:1: warning: parameter names (without types) in function declaration

---
 drivers/bcma/driver_chipcommon_pmu.c |    1 +
 1 file changed, 1 insertion(+)

@@ -9,6 +9,7 @@
  */
 
 #include "bcma_private.h"
+#include <linux/export.h>
 #include <linux/bcma/bcma.h>
 
 static u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset)

Hi Randy,

I have added this to my collection of merge fixups for the moduleh tree (since linux/export.h doesn't exist in Linus' tree, yet).

Cheers,
Stephen Rothwell                    [email protected]
http://www.canb.auug.org.au/~sfr/

W dniu 20 września 2011 22:51 użytkownik Randy Dunlap

Don't you get the same warning for core.c? Weird...

Rafał

No, I don't. Stranger things have happened, I'm sure.

Feel free to add export.h to other files, or do you want me to do that?

~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***

W dniu 21 września 2011 17:52 użytkownik Randy Dunlap

Please do that while you're hacking that include anyway.

Rafał

From: Randy Dunlap <[email protected]>

main.c and driver_mips.c use EXPORT_SYMBOL() etc.
so they should include <linux/export.h>.

---
 drivers/bcma/driver_mips.c |    1 +
 drivers/bcma/main.c        |    1 +
 2 files changed, 2 insertions(+)

@@ -14,6 +14,7 @@
 
 #include <linux/bcma/bcma.h>
 
+#include <linux/export.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
 #include <linux/serial_reg.h>

@@ -7,6 +7,7 @@
 
 #include "bcma_private.h"
 #include <linux/module.h>
+#include <linux/export.h>
 #include <linux/bcma/bcma.h>
 #include <linux/slab.h>
 

From this commit message, it appears that every routine that uses EXPORT_SYMBOL() will need to include this header. I looked at modifying rtlwifi and friends to include this header, but found that include/linux/export.h does not exist in any of my source trees. From that I assume that the change will happen in 3.2.

I have prepared a patch, but cannot use it at the moment. Is there somewhere that I should send it?

Larry

Hi Larry,

linux/export.h is only in linux-next. I think that you should just prepare a linux-next patch for rtlwifi and then push it after Paul Gortmaker's module.h-split git tree has been merged (it splits module.h into module.h and export.h), or maybe you could ask Paul to merge your patch into his tree.

[I added Paul to the cc: list.]

~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***

Ordinarily, yes, it is preferable to include the needed .h files from within the .c files. However quite a mumber of kernel subsystems do take the #include "everything.h" approach.

However, drivers/bcma is a bit odd in that it has bcma_private.h which includes delay.h (the everything.h approach) but most .c files explicitly include other things, including export.h.

There's no real pattern here and yes, I agree that the minimal and more typical approach is better.

@@ -10,6 +10,7 @@
 
 #include "bcma_private.h"
 #include <linux/bcma/bcma.h>
+#include <linux/export.h>
 
 static u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset)
 {

_

net/built-in.o: In function `unregister_8022_client':
(.text+0x24494): undefined reference to llc_sap_close' net/built-in.o: In function register_8022_client':
(.text+0x244f3): undefined reference to llc_sap_open' net/built-in.o: In function p8022_request':
p8022.c:(.text+0x24522): undefined reference to llc_build_and_send_ui_pkt' net/built-in.o: In function snap_request':
psnap.c:(.text+0x24846): undefined reference to llc_build_and_send_ui_pkt' net/built-in.o: In function snap_init':
psnap.c:(.init.text+0x98f): undefined reference to llc_sap_open' net/built-in.o: In function snap_exit':
psnap.c:(.exit.text+0x17): undefined reference to `llc_sap_close'

Full kernel randconfig file is attached.

~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 3.1.0-rc6 Kernel Configuration
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
# CONFIG_ZONE_DMA is not set
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" # CONFIG_KTIME_SCALAR is not set
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y

#
# General setup
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
CONFIG_KERNEL_BZIP2=y
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_FHANDLE is not set
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
# CONFIG_TASK_XACCT is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
# CONFIG_SPARSE_IRQ is not set

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_TRACE=y
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
CONFIG_TREE_RCU_TRACE=y
CONFIG_IKCONFIG=m
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CPUSETS is not set
CONFIG_CGROUP_CPUACCT=y
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_SCHED_AUTOGROUP=y
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EXPERT=y
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
# CONFIG_PRINTK is not set
# CONFIG_BUG is not set
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
CONFIG_AIO=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
CONFIG_OPTPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y

#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
# CONFIG_GCOV_PROFILE_ALL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_STOP_MACHINE=y
# CONFIG_BLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set # CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set # CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set # CONFIG_INLINE_READ_UNLOCK_IRQ is not set # CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set # CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set # CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set # CONFIG_MUTEX_SPIN_ON_OWNER is not set CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y CONFIG_SMP=y
CONFIG_X86_MPPARSE=y CONFIG_X86_EXTENDED_PLATFORM=y CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y CONFIG_X86_INTERNODE_CACHE_SHIFT=6 CONFIG_X86_CMPXCHG=y
CONFIG_CMPXCHG_LOCAL=y
CONFIG_CMPXCHG_DOUBLE=y CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
# CONFIG_SCHED_MC is not set CONFIG_IRQ_TIME_ACCOUNTING=y CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
# CONFIG_X86_MCE is not set
CONFIG_I8K=m
CONFIG_MICROCODE=m
# CONFIG_MICROCODE_INTEL is not set
# CONFIG_MICROCODE_AMD is not set CONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_ARCH_DMA_ADDR_T_64BIT=y CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_PROC_KCORE_TEXT=y CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y CONFIG_SPARSEMEM_VMEMMAP=y CONFIG_HAVE_MEMBLOCK=y
# CONFIG_MEMORY_HOTPLUG is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_COMPACTION is not set CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_TRANSPARENT_HUGEPAGE is not set
# CONFIG_CLEANCACHE is not set CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set CONFIG_X86_RESERVE_LOW=64
# CONFIG_MTRR is not set
# CONFIG_ARCH_RANDOM is not set
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y CONFIG_PHYSICAL_START=0x1000000 CONFIG_RELOCATABLE=y CONFIG_PHYSICAL_ALIGN=0x1000000 CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
CONFIG_CMDLINE_OVERRIDE=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_RUNTIME is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
CONFIG_CAN_PM_TRACE=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_SFI=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_ONDEMAND=m CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#

# x86 CPU frequency scaling drivers
#
# CONFIG_X86_P4_CLOCKMOD is not set

#

# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_INTEL_IDLE is not set

#
# Memory power savings
#

#
# Bus options (PCI etc.)
#
# CONFIG_PCI is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_PCCARD=m
CONFIG_PCMCIA=m

#
# PC-card bridges
#

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=m
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_KEYS_COMPAT=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y

#
# Networking options
#
# CONFIG_PACKET is not set
# CONFIG_UNIX is not set
# CONFIG_NET_KEY is not set
# CONFIG_INET is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_NETFILTER_XTABLES=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
# CONFIG_BRIDGE_EBT_T_FILTER is not set
CONFIG_BRIDGE_EBT_T_NAT=m
# CONFIG_BRIDGE_EBT_802_3 is not set
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
# CONFIG_BRIDGE_EBT_PKTTYPE is not set
# CONFIG_BRIDGE_EBT_STP is not set
CONFIG_BRIDGE_EBT_VLAN=m
# CONFIG_BRIDGE_EBT_DNAT is not set
# CONFIG_BRIDGE_EBT_MARK_T is not set
# CONFIG_BRIDGE_EBT_REDIRECT is not set
# CONFIG_BRIDGE_EBT_SNAT is not set
# CONFIG_BRIDGE_EBT_LOG is not set
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_ATM=m
# CONFIG_ATM_LANE is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
CONFIG_LLC2=m
# CONFIG_IPX is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
# CONFIG_IPDDP is not set
CONFIG_PHONET=m
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=m
CONFIG_BATMAN_ADV=m
# CONFIG_BATMAN_ADV_DEBUG is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_HAVE_BPF_JIT=y
# CONFIG_BPF_JIT is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=m
# CONFIG_AX25_DAMA_SLAVE is not set
# CONFIG_NETROM is not set
CONFIG_ROSE=m

#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
CONFIG_6PACK=m
# CONFIG_BPQETHER is not set
# CONFIG_BAYCOM_SER_FDX is not set
# CONFIG_BAYCOM_SER_HDX is not set
CONFIG_YAM=m
CONFIG_CAN=m
# CONFIG_CAN_RAW is not set
# CONFIG_CAN_BCM is not set
# CONFIG_CAN_GW is not set

#
# CAN Device Drivers
#
# CONFIG_CAN_VCAN is not set
# CONFIG_CAN_SLCAN is not set
# CONFIG_CAN_DEV is not set
CONFIG_CAN_DEBUG_DEVICES=y
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
# CONFIG_BT_BNEP_MC_FILTER is not set
# CONFIG_BT_BNEP_PROTO_FILTER is not set

#
# Bluetooth device drivers
#
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIDTL1 is not set
CONFIG_BT_HCIBT3C=m
# CONFIG_BT_HCIBLUECARD is not set
CONFIG_BT_HCIBTUART=m
# CONFIG_BT_HCIVHCI is not set
# CONFIG_BT_MRVL is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
CONFIG_RFKILL_REGULATOR=m
# CONFIG_NET_9P is not set
CONFIG_CAIF=m
# CONFIG_CAIF_DEBUG is not set
# CONFIG_CAIF_NETDEV is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_SENSORS_LIS3LV02D=m
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_APDS9802ALS is not set
CONFIG_ISL29003=m
CONFIG_ISL29020=m
# CONFIG_SENSORS_TSL2550 is not set
CONFIG_SENSORS_BH1780=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
CONFIG_HMC6352=m
CONFIG_VMWARE_BALLOON=m
CONFIG_BMP085=m
# CONFIG_USB_SWITCH_FSA9480 is not set

#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_93CX6 is not set

#
# Texas Instruments shared transport line discipline #
CONFIG_SENSORS_LIS3_I2C=m
CONFIG_HAVE_IDE=y

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
CONFIG_MII=m
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_ARCNET=y
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
# CONFIG_ARCNET_RAW is not set
# CONFIG_ARCNET_CAP is not set
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
# CONFIG_ARCNET_RIM_I is not set
CONFIG_ARCNET_COM20020=m
# CONFIG_ARCNET_COM20020_CS is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set

#
# CAIF transport drivers
#
CONFIG_CAIF_TTY=m
# CONFIG_CAIF_SPI_SLAVE is not set
CONFIG_CAIF_HSI=m
CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_AMD is not set
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=m
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_FUJITSU is not set
CONFIG_NET_VENDOR_MICREL=y
CONFIG_KS8842=m
CONFIG_KS8851_MLL=m
CONFIG_ETHOC=m
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_XIRCOM is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
# CONFIG_DAVICOM_PHY is not set
CONFIG_QSEMI_PHY=m
# CONFIG_LXT_PHY is not set
CONFIG_CICADA_PHY=m
# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=m
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_MICREL_PHY=m
CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
# CONFIG_PPPOATM is not set
# CONFIG_PPP_ASYNC is not set
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
CONFIG_TR=y
CONFIG_PCMCIA_IBMTR=m
# CONFIG_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers #
# CONFIG_WAN is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m

#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_AB8500_PONKEY=m
CONFIG_INPUT_AD714X=m
# CONFIG_INPUT_AD714X_I2C is not set
CONFIG_INPUT_BMA150=m
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_MMA8450=m
# CONFIG_INPUT_MPU3050 is not set
CONFIG_INPUT_APANEL=m
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_ADXL34X is not set
CONFIG_INPUT_CMA3000=m
CONFIG_INPUT_CMA3000_I2C=m

#
# Hardware I/O ports
#
CONFIG_SERIO=m
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_CT82C710 is not set
CONFIG_SERIO_LIBPS2=m
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
CONFIG_SERIO_PS2MULT=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
# CONFIG_VT_CONSOLE is not set
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_N_HDLC is not set
# CONFIG_TRACE_ROUTER is not set
CONFIG_TRACE_SINK=m
# CONFIG_DEVKMEM is not set
CONFIG_STALDRV=y

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
CONFIG_FIX_EARLYCON_MEM=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
CONFIG_SERIAL_TIMBERDALE=m
CONFIG_SERIAL_ALTERA_JTAGUART=m
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_SERIAL_XILINX_PS_UART=m
# CONFIG_TTY_PRINTK is not set
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=m
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
CONFIG_R3964=m

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_RAMOOPS=m
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# I2C system bus drivers (mostly embedded / system-on-chip) #
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT_LIGHT=m

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_DEBUG_CORE=y
# CONFIG_I2C_DEBUG_ALGO is not set
CONFIG_I2C_DEBUG_BUS=y
# CONFIG_SPI is not set

#
# PPS support
#

#
# PPS generators support
#

#
# PTP clock support
#

#
# Enable Device Drivers -> PPS to see the PTP clock options. #
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
CONFIG_W1=m
# CONFIG_W1_CON is not set

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_DS1WM is not set

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
# CONFIG_W1_SLAVE_DS2408 is not set
# CONFIG_W1_SLAVE_DS2423 is not set
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
# CONFIG_W1_SLAVE_DS2760 is not set
# CONFIG_W1_SLAVE_DS2780 is not set
CONFIG_W1_SLAVE_BQ27000=m
CONFIG_POWER_SUPPLY=m
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=m
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2782 is not set
CONFIG_BATTERY_BQ20Z75=m
CONFIG_BATTERY_BQ27x00=m
CONFIG_BATTERY_BQ27X00_I2C=y
CONFIG_BATTERY_BQ27X00_PLATFORM=y
CONFIG_BATTERY_MAX17040=m
# CONFIG_BATTERY_MAX17042 is not set
CONFIG_CHARGER_MAX8903=m
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
CONFIG_SENSORS_ADM1021=m
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
CONFIG_SENSORS_F71805F=m
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LM95241=m
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=m
# CONFIG_SENSORS_PCF8591 is not set
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC6W201=m
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
CONFIG_SENSORS_ADS1015=m
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_W83781D=m
# CONFIG_SENSORS_W83791D is not set
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_APPLESMC=m
CONFIG_THERMAL=m
CONFIG_THERMAL_HWMON=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
CONFIG_SSB_SILENT=y
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_PCF50633 is not set
CONFIG_ABX500_CORE=y
CONFIG_AB8500_CORE=y
# CONFIG_AB8500_DEBUG is not set
# CONFIG_MFD_WL1273_CORE is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_DUMMY=y
CONFIG_REGULATOR_FIXED_VOLTAGE=m
CONFIG_REGULATOR_VIRTUAL_CONSUMER=m
CONFIG_REGULATOR_USERSPACE_CONSUMER=m
CONFIG_REGULATOR_BQ24022=m
# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_MAX8649=m
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8952 is not set
CONFIG_REGULATOR_LP3971=m
CONFIG_REGULATOR_LP3972=m
# CONFIG_REGULATOR_TPS65023 is not set
CONFIG_REGULATOR_TPS6507X=m
CONFIG_REGULATOR_ISL6271A=m
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_AB8500 is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_DRM=m
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
# CONFIG_BACKLIGHT_CLASS_DEVICE is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
CONFIG_MEMSTICK=m
CONFIG_MEMSTICK_DEBUG=y

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set

#
# MemoryStick Host Controller Drivers
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_PCA955X=m
CONFIG_LEDS_REGULATOR=m
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_TRIGGERS=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=m
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#

# iptables trigger is under Netfilter config (LED target)
#
CONFIG_ACCESSIBILITY=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
# CONFIG_DMADEVICES_VDEBUG is not set

#
# DMA Devices
#
CONFIG_TIMB_DMA=m
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
CONFIG_NET_DMA=y
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
CONFIG_VIRTIO=m
CONFIG_VIRTIO_RING=m

#
# Virtio drivers
#
CONFIG_VIRTIO_BALLOON=m
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_SENSORS_HDAPS is not set
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_IOMMU_SUPPORT is not set
# CONFIG_VIRT_DRIVERS is not set

#
# Firmware Drivers
#
CONFIG_EDD=m
CONFIG_EDD_OFF=y
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_DELL_RBU=m
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=m
CONFIG_ISCSI_IBFT_FIND=y
# CONFIG_SIGMA is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# File systems
#
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_FILE_LOCKING is not set
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=m
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
# CONFIG_CUSE is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_PROC_VMCORE is not set
CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_SYSFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
CONFIG_PSTORE=y
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_SLUB_STATS=y
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_PROVE_RCU=y
CONFIG_PROVE_RCU_REPEATEDLY=y
CONFIG_SPARSE_RCU_POINTER=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_KOBJECT=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_WRITECOUNT=y
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_DEBUG_LIST=y
CONFIG_TEST_LIST_SORT=y
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_RCU_TORTURE_TEST=m
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_KPROBES_SANITY_TEST=y
CONFIG_BACKTRACE_SELF_TEST=m
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
# CONFIG_FAULT_INJECTION_DEBUG_FS is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
CONFIG_SAMPLES=y
CONFIG_SAMPLE_KOBJECT=m
# CONFIG_SAMPLE_KPROBES is not set
# CONFIG_SAMPLE_HW_BREAKPOINT is not set
# CONFIG_SAMPLE_KFIFO is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_TEST_KSTRTOX is not set
CONFIG_STRICT_DEVMEM=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
# CONFIG_EARLY_PRINTK is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_X86_PTDUMP=y
CONFIG_DEBUG_RODATA=y
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_SET_MODULE_RONX is not set
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_IOMMU_STRESS=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_X86_DECODER_SELFTEST=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
# CONFIG_DEBUG_BOOT_PARAMS is not set
CONFIG_CPA_DEBUG=y
CONFIG_OPTIMIZE_INLINING=y

#
# Security options
#
CONFIG_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_PATH=y
# CONFIG_SECURITY_TOMOYO is not set
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
CONFIG_INTEGRITY=y
# CONFIG_IMA is not set
CONFIG_EVM=y
CONFIG_DEFAULT_SECURITY_APPARMOR=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="apparmor"
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=m
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_PCBC is not set

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=m
# CONFIG_CRYPTO_AES_NI_INTEL is not set
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
# CONFIG_CRYPTO_CAST5 is not set
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=m

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_USER_API=m
# CONFIG_CRYPTO_USER_API_HASH is not set
CONFIG_CRYPTO_USER_API_SKCIPHER=m
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=m
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=m
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
# CONFIG_CRC8 is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_NLATTR=y
# CONFIG_AVERAGE is not set
# CONFIG_CORDIC is not set