i2c: i2c-riic: add support for Renesas RIIC
Subsystems (3)
PATCH v3 1/2 i2c: i2c-riic: add support for Renesas RIIC
This driver supports the RIIC module. The SH7757 has it. The driver doesn't use any IRQ handler. This is because the module has errata in an interrupt. So, we cannot use the interrupt for transfer.
Signed-off-by Yoshihiro Shimoda <[email protected]>
---
about v3
- add clk framework
- adjust for the latest kernel (fix compile error)
drivers/i2c/busses/Kconfig | 9 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-riic.c | 620 +++++++++++++++++++++++++++++++++++++++++ include/linux/i2c/riic.h | 29 ++ 4 files changed, 659 insertions(+), 0 deletions(-) create mode 100644 drivers/i2c/busses/i2c-riic.c create mode 100644 include/linux/i2c/riic.h
drivers/i2c/busses/Kconfig +9 -0
@@ -687,6 +687,15 @@ config I2C_EG20T ML7213/ML7223 is companion chip for Intel Atom E6xx series. ML7213/ML7223 is completely compatible for Intel EG20T PCH. +config I2C_RIIC + tristate "Renesas RIIC controller" + depends on SUPERH + help + This driver supports the RIIC module of the Renesas SH7757. + + This driver can also be built as a module. If so, the module + will be called i2c-riic. + comment "External I2C/SMBus adapter drivers" config I2C_DIOLAN_U2C
drivers/i2c/busses/Makefile +1 -0
@@ -55,6 +55,7 @@ obj-$(CONFIG_I2C_PNX) += i2c-pnx.o obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o obj-$(CONFIG_I2C_PXA) += i2c-pxa.o obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o +obj-$(CONFIG_I2C_RIIC) += i2c-riic.o obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o obj-$(CONFIG_I2C_S6000) += i2c-s6000.o obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o
drivers/i2c/busses/i2c-riic.c new file +620 -0
620 lines not on this page · raw message
include/linux/i2c/riic.h new file +29 -0
@@ -0,0 +1,29 @@ +/* +* RIIC bus driver +* +* Copyright (C) 2011 Renesas Solutions Corp. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; version 2 of the License. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +* +*/ + +#ifndef _RIIC_H_ +#define _RIIC_H_ + +struct riic_platform_data { +int clock;/* i2c clock (kHZ) */ +}; + +#endif +
Signature · 1 line
1.7.1
Quoted 4 lines · Yoshihiro Shimoda
This driver supports the RIIC module. The SH7757 has it. The driver doesn't use any IRQ handler. This is because the module has errata in an interrupt. So, we cannot use the interrupt for transfer.
anyone care to comment on this driver? will add to next -next release.
Signature · 1 line
Ben