Skip to contentSkip to conversation

mx31pdk: Remove unneeded config

PATCH New Fabio Estevam 4 participants 6 messages Sep 12, 2011 – Oct 10, 2011

lore
Share & tools
lore

Fabio Estevam

author
#0 lore raw

PATCH 1/1 mx31pdk: Remove unneeded config

Currently there are two config options for building a U-boot binary for MX31PDK:

make mx31pdk_config

or,

make mx31pdk_nand_config

mx31pdk_config was developed first when no NAND SPL support was available for MX31 and it requires that the U-boot binary is loaded into RAM via JTAG and it forces SKIP_LOWLEVEL_INIT.

mx31pdk_nand_config was added later and it allows booting from NAND Flash.

Leave just one config option called mx31pdk so that it produces a binary that can boot from NAND Flash.

Signed-off-by Fabio Estevam <[email protected]>

---

This applies on Stefano's origin/next branch.

 boards.cfg |    3 +--
 1 files changed, 1 insertions(+), 2 deletions(-)
boards.cfg +1 -2
index 446ed04..1e2ff43 100644
@@ -41,8 +41,7 @@ mx31ads                      arm         arm1136     -                   freesca
 imx31_litekit                arm         arm1136     -                   logicpd        mx31
 imx31_phycore                arm         arm1136     -                   -              mx31
 imx31_phycore_eet            arm         arm1136     imx31_phycore       -              mx31         imx31_phycore:IMX31_PHYCORE_EET
-mx31pdk_nand                 arm         arm1136     mx31pdk             freescale      mx31         mx31pdk:NAND_U_BOOT
-mx31pdk                      arm         arm1136     -                   freescale      mx31         mx31pdk:SKIP_LOWLEVEL_INIT
+mx31pdk                      arm         arm1136     -                   freescale      mx31         mx31pdk:NAND_U_BOOT
 mx35pdk                      arm         arm1136     -                   freescale      mx35
 omap2420h4                   arm         arm1136     -                   ti             omap24xx
 tnetv107x_evm                arm         arm1176     tnetv107xevm        ti             tnetv107x
Signature · 1 line
1.6.0.4
#1 lore raw

PATCH 1/1 mx31pdk: Remove unneeded config

Quoted 12 lines · Fabio Estevam

Currently there are two config options for building a U-boot binary for MX31PDK:

make mx31pdk_config

or,

make mx31pdk_nand_config

mx31pdk_config was developed first when no NAND SPL support was available for MX31 and it requires that the U-boot binary is loaded into RAM via JTAG and it forces SKIP_LOWLEVEL_INIT.

Quoted 5 lines

mx31pdk_nand_config was added later and it allows booting from NAND Flash.

Leave just one config option called mx31pdk so that it produces a binary that can boot from NAND Flash.

Signed-off-by Fabio Estevam <[email protected]>

Agree, nand is the only way to boot this board.

Acked-by Stefano Babic <[email protected]>

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================
#2 lore raw

PATCH 1/1 mx31pdk: Remove unneeded config

Hi Wolfgang,

Quoted 15 lines · Stefano Babic
Quoted 14 lines · Fabio Estevam

Currently there are two config options for building a U-boot binary for MX31PDK:

make mx31pdk_config

or,

make mx31pdk_nand_config

mx31pdk_config was developed first when no NAND SPL support was available for MX31 and it requires that the U-boot binary is loaded into RAM via JTAG and it forces SKIP_LOWLEVEL_INIT.

mx31pdk_nand_config was added later and it allows booting from NAND Flash.

Quoted 7 lines
Quoted 3 lines

Leave just one config option called mx31pdk so that it produces a binary that can boot from NAND Flash.

Signed-off-by Fabio Estevam <[email protected]>

Agree, nand is the only way to boot this board.

Acked-by Stefano Babic <[email protected]>

Ping?

Regards,

Fabio Estevam

#3 lore raw

PATCH 1/1 mx31pdk: Remove unneeded config

Quoted 20 lines · Fabio Estevam

Hi Wolfgang,

Quoted 17 lines · Stefano Babic
Quoted 16 lines · Fabio Estevam

Currently there are two config options for building a U-boot binary for MX31PDK:

make mx31pdk_config

or,

make mx31pdk_nand_config

mx31pdk_config was developed first when no NAND SPL support was available for MX31 and it requires that the U-boot binary is loaded into RAM via JTAG and it forces SKIP_LOWLEVEL_INIT.

mx31pdk_nand_config was added later and it allows booting from NAND Flash.

Leave just one config option called mx31pdk so that it produces a binary that can boot from NAND Flash.

Quoted 7 lines
Quoted 5 lines
Quoted 1 line
Signed-off-by Fabio Estevam <[email protected]>

Agree, nand is the only way to boot this board.

Acked-by Stefano Babic <[email protected]>

Ping?

Sorry, your patch is in my queue and I have not yet merged because I needed the other patches ("Makefile: remove mx31pdk exception" and "Makefile: drop imx31_phycore from general Makefile") to apply it. They are now in mainline, so I can merge it.

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================
#4 lore raw

PATCH 1/1 mx31pdk: Remove unneeded config

In reply to Fabio Estevam

Dear Fabio Estevam,

Quoted 2 lines · In message <CAOMZO5C0PE3F+4H8t7sVpsfUcjUFp_-Z27ZzQrObYnNvY5sPHw@mail.gmail.com>…

Ping?

Pong. What's up? This is i.MX, and I haven't seen any ARM (nor even i.MX) pull requests yet.

Best regards,

Wolfgang Denk

Signature · 4 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Lead me not into temptation... I can find it myself.
#5 lore raw

PATCH 1/1 mx31pdk: Remove unneeded config

In reply to Fabio Estevam
Quoted 12 lines · Fabio Estevam

Currently there are two config options for building a U-boot binary for MX31PDK:

make mx31pdk_config

or,

make mx31pdk_nand_config

mx31pdk_config was developed first when no NAND SPL support was available for MX31 and it requires that the U-boot binary is loaded into RAM via JTAG and it forces SKIP_LOWLEVEL_INIT.

Quoted 7 lines

mx31pdk_nand_config was added later and it allows booting from NAND Flash.

Leave just one config option called mx31pdk so that it produces a binary that can boot from NAND Flash.

Signed-off-by Fabio Estevam <[email protected]>

---

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================