Skip to contentSkip to conversation

Anyone used KDB single-stepping on ARM

DISCUSSION Tim Bird 2 participants 3 messages Oct 12, 2011 – Dec 13, 2011

lore
Share & tools
lore

Tim Bird

author
#0 lore raw

I've tried to use single-stepping ('ss' command) on ARM from KDB, without success.

Has anyone done this - is it currently supported on ARM?
-- Tim

=============================
Tim Bird
Architecture Group Chair, CE Workgroup of the Linux Foundation Senior Staff Engineer, Sony Network Entertainment
=============================

#1 lore raw
Quoted 4 lines · Tim Bird

I've tried to use single-stepping ('ss' command) on ARM from KDB, without success.

Has anyone done this - is it currently supported on ARM?

It is only supported via patches that are not in the mainline kernel the same is also true of the MIPS architecture.

The last consideration I had taken a look at was to consider using the kprobes for single stepping, assuming kprobes work ok on ARM, vs using emulation of single stepping with breakpoints.

The other possibility for newer arm hardward (v7 and up) is to use the hw_breakpoint API and plumb it into kdb/kgdb via the arch/arm/kernel/kgdb.c. It is probably time to take another look at this now since it was merged to the mainline in the last year.

Jason.

author
#2 lore raw
Quoted 11 lines · Jason Wessel
Quoted 4 lines · Tim Bird

I've tried to use single-stepping ('ss' command) on ARM from KDB, without success.

Has anyone done this - is it currently supported on ARM?

It is only supported via patches that are not in the mainline kernel the same is also true of the MIPS architecture.

The last consideration I had taken a look at was to consider using the kprobes for single stepping, assuming kprobes work ok on ARM, vs using emulation of single stepping with breakpoints.

The other possibility for newer arm hardward (v7 and up) is to use the hw_breakpoint API and plumb it into kdb/kgdb via the arch/arm/kernel/kgdb.c. It is probably time to take another look at this now since it was merged to the mainline in the last year.

OK. Thanks very much for the response. I started looking at it myself, and it looked too complicated for me to tackle without a lot more research. My understanding is that older ARM hardware (pre-V7) doesn't have single-step support, which appears
to match what you're saying above.

If you or someone else works on this, let me know. I'd be a willing tester. But I probably don't have enough cycles (or experience with kdb/kgdb) to actually implement this myself.
-- Tim

=============================
Tim Bird
Architecture Group Chair, CE Workgroup of the Linux Foundation Senior Staff Engineer, Sony Network Entertainment
=============================