Add SPL malloc to devkit 8000
cover Add SPL malloc to devkit 8000
Hey all,
As part of fixing FAT support in SPL, Aneesh V added a requirement that all omap-common/spl.c using platforms (so omap3 and omap4 currently) also define malloc space. Based on how this was done for omap4 I've added in a scratch space for devkit 8000. This change is required for the devkit8000 + MMC SPL changes that are currently in u-boot-arm (which require the changes from Aneesh V for malloc with vfat).
Signature · 1 line
Tom
PATCH 1/1 devkit8000: Add malloc space for SPL
With malloc support being a new requirement for all ARM SPL implementations, define a small area for use on devkit8000.
--- include/configs/devkit8000.h | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)
include/configs/devkit8000.h +3 -0
@@ -353,4 +353,7 @@#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x200000 +#define CONFIG_SYS_SPL_MALLOC_START 0x80108000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000/* 1 MB */ +#endif /* __CONFIG_H */
Signature · 1 line
1.7.0.4
PATCH 1/1 devkit8000: Add malloc space for SPL
Hi Tom,
Le 18/10/2011 21:54, Tom Rini a ?crit :
Quoted 16 lines
With malloc support being a new requirement for all ARM SPL implementations, define a small area for use on devkit8000.
Cc Frederik Kriewitz<[email protected]>Cc Albert ARIBAUD<[email protected]>Cc Simon Schwarz<[email protected]>Signed-off-by Tom Rini<[email protected]>--- include/configs/devkit8000.h | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)include/configs/devkit8000.h +0
-0
include/configs/devkit8000.h line 359
Quoted 7 lines
include/configs/devkit8000.h +3
-0@@ -353,4 +353,7 @@#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x200000 +#define CONFIG_SYS_SPL_MALLOC_START 0x80108000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000/* 1 MB */ +#endif /* __CONFIG_H */
Hadn't you submitted this already twelve minutes before?
Amicalement,
Signature · 1 line
Albert.
PATCH 1/1 devkit8000: Add malloc space for SPL
Quoted 22 lines · Albert ARIBAUD
Hi Tom,
Le 18/10/2011 21:54, Tom Rini a ?crit :
Quoted 19 lines
With malloc support being a new requirement for all ARM SPL implementations, define a small area for use on devkit8000.
Cc Frederik Kriewitz<[email protected]>Cc Albert ARIBAUD<[email protected]>Cc Simon Schwarz<[email protected]>Signed-off-by Tom Rini<[email protected]>--- include/configs/devkit8000.h | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)include/configs/devkit8000.h +0
-0@@ -353,4 +353,7 @@#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x200000
Quoted 6 lines
include/configs/devkit8000.h line 359
Quoted 4 lines
include/configs/devkit8000.h +3
-0+#define CONFIG_SYS_SPL_MALLOC_START 0x80108000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000/* 1 MB */ +#endif /* __CONFIG_H */ Hadn't you submitted this already twelve minutes before?
Yes, but not to the ML, sorry for the duplicates to the CC'd folks.
Signature · 1 line
Tom
PATCH 1/1 devkit8000: Add malloc space for SPL
In reply to Tom RiniQuoted 16 lines · Tom Rini
With malloc support being a new requirement for all ARM SPL implementations, define a small area for use on devkit8000.
Cc Frederik Kriewitz<[email protected]>Cc Albert ARIBAUD<[email protected]>Cc Simon Schwarz<[email protected]>Signed-off-by Tom Rini<[email protected]>--- include/configs/devkit8000.h | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)include/configs/devkit8000.h +0
-0
include/configs/devkit8000.h line 359
Quoted 7 lines
include/configs/devkit8000.h +3
-0@@ -353,4 +353,7 @@#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x200000 +#define CONFIG_SYS_SPL_MALLOC_START 0x80108000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000/* 1 MB */ +#endif /* __CONFIG_H */
With NAND it works fine.
But with MMC there seems to be another problem with u-boot-arm. (is not booting at all) so:
Presumably I won't have the time to look into the MMC problem until next week - volunteers? ;)
Regards
Simon