Eclipse Plugin: ADT Version too old
I am trying to use the new eclipse plugin, which I have had working fine for the past couple of weeks until I switched from the master branch to edison.
I performed a fresh build using the stable edison branch, installed the new 1.1 eclipse plugin and now whenever I try to setup the Yocto eclipse environment I receive the following error:
Yocto Preferences Configuration Error!
OECORE related items are not found in envrionement setup files. The ADT version you're using is too old.
Please upgrade to our latest ADT Version!
This pops up in a message box, not the eclipse console. I have followed the ADT Setup guide to the letter and it's not playing ball - could someone confirm this as working or point me towards a reason why I may be getting this error?
Cheers,
Jack.
Quoted 11 lines · Jack Mitchell
I am trying to use the new eclipse plugin, which I have had working fine for the past couple of weeks until I switched from the master branch to edison.
I performed a fresh build using the stable edison branch, installed the new 1.1 eclipse plugin and now whenever I try to setup the Yocto eclipse environment I receive the following error:
Yocto Preferences Configuration Error!
OECORE related items are not found in envrionement setup files. The ADT version you're using is too old.
Please upgrade to our latest ADT Version!This pops up in a message box, not the eclipse console. I have followed the ADT Setup guide to the letter and it's not playing ball - could someone confirm this as working or point me towards a reason why I may be getting this error?
Quoted 8 lines
Cheers,
Jack._______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
This is a pastebin of my current environment setup file:
Quoted 23 lines · Jack Mitchell
Quoted 22 lines · Jack Mitchell
I am trying to use the new eclipse plugin, which I have had working fine for the past couple of weeks until I switched from the master branch to edison.
I performed a fresh build using the stable edison branch, installed the new 1.1 eclipse plugin and now whenever I try to setup the Yocto eclipse environment I receive the following error:
Yocto Preferences Configuration Error!
OECORE related items are not found in envrionement setup files. The ADT version you're using is too old.
Please upgrade to our latest ADT Version!This pops up in a message box, not the eclipse console. I have followed the ADT Setup guide to the letter and it's not playing ball - could someone confirm this as working or point me towards a reason why I may be getting this error?
Cheers,
Jack.
Quoted 9 lines
Quoted 4 lines
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yoctoThis is a pastebin of my current environment setup file:
I'm not ADT expert but I expect the problem is this line:
export OECORE_DISTRO_VERSION="1.1+snapshot-20111021"
By switching to the edison branch you'll now have a DISTRO_VERSION of "1.1", without the snapshot and date - hence version mismatch.
I'm not sure if you need to change the plugin or just build a new meta-ide-support, though.
Cheers,
Joshua
Signature · 3 lines
Joshua Lock
Yocto Project "Johannes factotum"
Intel Open Source Technology CentreQuoted 37 lines · Joshua Lock
Quoted 23 lines · Jack Mitchell
Quoted 22 lines · Jack Mitchell
I am trying to use the new eclipse plugin, which I have had working fine for the past couple of weeks until I switched from the master branch to edison.
I performed a fresh build using the stable edison branch, installed the new 1.1 eclipse plugin and now whenever I try to setup the Yocto eclipse environment I receive the following error:
Yocto Preferences Configuration Error!
OECORE related items are not found in envrionement setup files. The ADT version you're using is too old.
Please upgrade to our latest ADT Version!This pops up in a message box, not the eclipse console. I have followed the ADT Setup guide to the letter and it's not playing ball - could someone confirm this as working or point me towards a reason why I may be getting this error?
Cheers,
Jack.Quoted 8 lines
Quoted 4 lines
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yoctoThis is a pastebin of my current environment setup file:
I'm not ADT expert but I expect the problem is this line:
export OECORE_DISTRO_VERSION="1.1+snapshot-20111021"
Quoted 8 lines
By switching to the edison branch you'll now have a
DISTRO_VERSIONof "1.1", without the snapshot and date - hence version mismatch.I'm not sure if you need to change the plugin or just build a new meta-ide-support, though.
Cheers,
Joshua
Ah, that makes sense Joshua. However, this is a fresh build directory created after I had checked out the edison tag, so due to me checking out a git 'tag' I have the snapshot tag version listed instead of the 1.1 clean download version?
So all the things I built were built while on an edision checkout which means I shouldn't have old git versions lingering about.
Cheers,
Jack.
Jack Mitchell wrote on 2011-10-24:
Quoted 7 lines
I am trying to use the new eclipse plugin, which I have had working fine for the past couple of weeks until I switched from the master branch to edison.
I performed a fresh build using the stable edison branch, installed the new 1.1 eclipse plugin and now whenever I try to setup the Yocto eclipse environment I receive the following error:
Quoted 9 lines
Yocto Preferences Configuration Error!
OECORE related items are not found in envrionement setup files. The ADT version you're using is too old.
Please upgrade to our latest ADT Version!This pops up in a message box, not the eclipse console. I have
followed the ADT Setup guide to the letter and it's not playing ball -
could someone confirm this as working or point me towards a reason why I may be getting this error?
Hi Jack,
How did you install your ADT? You can check the ADT version by "cat" the file /opt/poky/${version}/version-xxxx, where xxxx is your target sys architecture.
-Lianhao
Quoted 19 lines · Lianhao
Jack Mitchell wrote on 2011-10-24:
Quoted 7 lines
I am trying to use the new eclipse plugin, which I have had working fine for the past couple of weeks until I switched from the master branch to edison.
I performed a fresh build using the stable edison branch, installed the new 1.1 eclipse plugin and now whenever I try to setup the Yocto eclipse environment I receive the following error:
Quoted 9 lines
Yocto Preferences Configuration Error!
OECORE related items are not found in envrionement setup files. The ADT version you're using is too old.
Please upgrade to our latest ADT Version!This pops up in a message box, not the eclipse console. I have
followed the ADT Setup guide to the letter and it's not playing ball -
could someone confirm this as working or point me towards a reason why I may be getting this error?Hi Jack,
Quoted 7 lines
How did you install your ADT? You can check the ADT version by "cat" the file
/opt/poky/${version}/version-xxxx, where xxxx is your target sys architecture.-Lianhao
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Hi Lianhao,
I am using the yocto build tree so I don't have an installed ADT in /opt but one that has been generated within my build directory, this is correct yes?
Jack.
Hi Jack,
So you mean you did "bitbake meta-ide-support" to use the build tree?
I just tried with my Edison build tree mode on my laptop and it works fine. So can you check under your build/tmp directory, there should be an environment-setup-*-poky-linux file, where * is your target arch. At the end file do you have several OECORE_* settings ? If not, you need to rerun "bitbake meta-ide-support" and ensure there're OECORE_* settings at the end.
Thanks,
Jessica
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Jack Mitchell
Sent: Monday, October 24, 2011 2:24 AM
To: [email protected]
Subject: Re: [yocto] Eclipse Plugin: ADT Version too old
Quoted 19 lines · Lianhao
Jack Mitchell wrote on 2011-10-24:
Quoted 7 lines
I am trying to use the new eclipse plugin, which I have had working fine for the past couple of weeks until I switched from the master branch to edison.
I performed a fresh build using the stable edison branch, installed the new 1.1 eclipse plugin and now whenever I try to setup the Yocto eclipse environment I receive the following error:
Quoted 9 lines
Yocto Preferences Configuration Error!
OECORE related items are not found in envrionement setup files. The ADT version you're using is too old.
Please upgrade to our latest ADT Version!This pops up in a message box, not the eclipse console. I have
followed the ADT Setup guide to the letter and it's not playing ball -
could someone confirm this as working or point me towards a reason why I may be getting this error?Hi Jack,
Quoted 7 lines
How did you install your ADT? You can check the ADT version by "cat" the file
/opt/poky/${version}/version-xxxx, where xxxx is your target sys architecture.-Lianhao
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Hi Lianhao,
I am using the yocto build tree so I don't have an installed ADT in /opt but one that has been generated within my build directory, this is correct yes?
Jack.
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Quoted 48 lines · Jessica
Hi Jack,
So you mean you did "bitbake meta-ide-support" to use the build tree?
I just tried with my Edison build tree mode on my laptop and it works fine. So can you check under your build/tmp directory, there should be an environment-setup-*-poky-linux file, where * is your target arch. At the end file do you have several OECORE_* settings ? If not, you need to rerun "bitbake meta-ide-support" and ensure there're OECORE_* settings at the end.
Thanks,
Jessica-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Jack Mitchell
Sent: Monday, October 24, 2011 2:24 AM
To: [email protected]
Subject: Re: [yocto] Eclipse Plugin: ADT Version too oldQuoted 19 lines · Lianhao
Jack Mitchell wrote on 2011-10-24:
Quoted 7 lines
I am trying to use the new eclipse plugin, which I have had working fine for the past couple of weeks until I switched from the master branch to edison.
I performed a fresh build using the stable edison branch, installed the new 1.1 eclipse plugin and now whenever I try to setup the Yocto eclipse environment I receive the following error:
Quoted 9 lines
Yocto Preferences Configuration Error!
OECORE related items are not found in envrionement setup files. The ADT version you're using is too old.
Please upgrade to our latest ADT Version!This pops up in a message box, not the eclipse console. I have
followed the ADT Setup guide to the letter and it's not playing ball -
could someone confirm this as working or point me towards a reason why I may be getting this error?Hi Jack,
Quoted 7 lines
How did you install your ADT? You can check the ADT version by "cat" the file
/opt/poky/${version}/version-xxxx, where xxxx is your target sys architecture.-Lianhao
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yoctoHi Lianhao,
I am using the yocto build tree so I don't have an installed ADT in /opt but one that has been generated within my build directory, this is correct yes?
Quoted 5 lines
Jack.
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Hi Jessica,
I posted my environment settings earlier, which are located here: http://pastebin.com/4vnWPAD2
Yes, I did use bitbake meta-ide-support to build my root.
OK missed your env post. Then this is your problem:
16.export OECORE_DISTRO_VERSION="1.1+snapshot-20111021" 17.export OECORE_SDK_VERSION="1.1+snapshot"
They need to be 1.1 instead of 1.1+snapshot. You need to update your Edison branch then do "bitbake meta-ide-support"
-----Original Message-----
From: Jack Mitchell [mailto:[email protected]]
Sent: Monday, October 24, 2011 8:44 AM
To: Zhang, Jessica
Cc: [email protected]
Subject: Re: [yocto] Eclipse Plugin: ADT Version too old
Quoted 48 lines · Jessica
Hi Jack,
So you mean you did "bitbake meta-ide-support" to use the build tree?
I just tried with my Edison build tree mode on my laptop and it works fine. So can you check under your build/tmp directory, there should be an environment-setup-*-poky-linux file, where * is your target arch. At the end file do you have several OECORE_* settings ? If not, you need to rerun "bitbake meta-ide-support" and ensure there're OECORE_* settings at the end.
Thanks,
Jessica-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Jack Mitchell
Sent: Monday, October 24, 2011 2:24 AM
To: [email protected]
Subject: Re: [yocto] Eclipse Plugin: ADT Version too oldQuoted 19 lines · Lianhao
Jack Mitchell wrote on 2011-10-24:
Quoted 7 lines
I am trying to use the new eclipse plugin, which I have had working fine for the past couple of weeks until I switched from the master branch to edison.
I performed a fresh build using the stable edison branch, installed the new 1.1 eclipse plugin and now whenever I try to setup the Yocto eclipse environment I receive the following error:
Quoted 9 lines
Yocto Preferences Configuration Error!
OECORE related items are not found in envrionement setup files. The ADT version you're using is too old.
Please upgrade to our latest ADT Version!This pops up in a message box, not the eclipse console. I have
followed the ADT Setup guide to the letter and it's not playing ball -
could someone confirm this as working or point me towards a reason why I may be getting this error?Hi Jack,
Quoted 7 lines
How did you install your ADT? You can check the ADT version by "cat" the file
/opt/poky/${version}/version-xxxx, where xxxx is your target sys architecture.-Lianhao
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yoctoHi Lianhao,
I am using the yocto build tree so I don't have an installed ADT in /opt but one that has been generated within my build directory, this is correct yes?
Quoted 5 lines
Jack.
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Hi Jessica,
I posted my environment settings earlier, which are located here:
http://pastebin.com/4vnWPAD2
Yes, I did use bitbake meta-ide-support to build my root.
Quoted 68 lines · Jessica
OK missed your env post. Then this is your problem:
16.export OECORE_DISTRO_VERSION="1.1+snapshot-20111021" 17.export OECORE_SDK_VERSION="1.1+snapshot"
They need to be 1.1 instead of 1.1+snapshot. You need to update your Edison branch then do "bitbake meta-ide-support"
-----Original Message-----
From: Jack Mitchell [mailto:[email protected]]
Sent: Monday, October 24, 2011 8:44 AM
To: Zhang, Jessica
Cc: [email protected]
Subject: Re: [yocto] Eclipse Plugin: ADT Version too oldQuoted 48 lines · Jessica
Hi Jack,
So you mean you did "bitbake meta-ide-support" to use the build tree?
I just tried with my Edison build tree mode on my laptop and it works fine. So can you check under your build/tmp directory, there should be an environment-setup-*-poky-linux file, where * is your target arch. At the end file do you have several OECORE_* settings ? If not, you need to rerun "bitbake meta-ide-support" and ensure there're OECORE_* settings at the end.
Thanks,
Jessica-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Jack Mitchell
Sent: Monday, October 24, 2011 2:24 AM
To: [email protected]
Subject: Re: [yocto] Eclipse Plugin: ADT Version too oldQuoted 19 lines · Lianhao
Jack Mitchell wrote on 2011-10-24:
Quoted 7 lines
I am trying to use the new eclipse plugin, which I have had working fine for the past couple of weeks until I switched from the master branch to edison.
I performed a fresh build using the stable edison branch, installed the new 1.1 eclipse plugin and now whenever I try to setup the Yocto eclipse environment I receive the following error:
Quoted 9 lines
Yocto Preferences Configuration Error!
OECORE related items are not found in envrionement setup files. The ADT version you're using is too old.
Please upgrade to our latest ADT Version!This pops up in a message box, not the eclipse console. I have
followed the ADT Setup guide to the letter and it's not playing ball -
could someone confirm this as working or point me towards a reason why I may be getting this error?Hi Jack,
Quoted 7 lines
How did you install your ADT? You can check the ADT version by "cat" the file
/opt/poky/${version}/version-xxxx, where xxxx is your target sys architecture.-Lianhao
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yoctoHi Lianhao,
I am using the yocto build tree so I don't have an installed ADT in /opt but one that has been generated within my build directory, this is correct yes?
Quoted 5 lines
Jack.
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Quoted 6 lines
Hi Jessica,
I posted my environment settings earlier, which are located here:
http://pastebin.com/4vnWPAD2Yes, I did use bitbake meta-ide-support to build my roo
Hi Jessica,
I just did a full fresh re-build from scratch and now my environment variables are as follows:
My current git status is:
# On branch edision
# Untracked files:
# (use "git add <file>..." to include in what will be committed)
#
# ../bitbake/lib/bb/pysh/pyshtables.py # ../conf/ # ./ # ../qemuarm-toolchain/
nothing added to commit but untracked files present (use "git add" to track)
The environment variables are still wrong, can I manually change them, I understand this is bad practice but I can't develop until I fix this.
Quoted 1 line
t.
Quoted 17 lines · Jack Mitchell
Hi Jessica,
I just did a full fresh re-build from scratch and now my environment variables are as follows:
My current git status is:
# On branch edision
# Untracked files:
# (use "git add <file>..." to include in what will be committed)
## ../bitbake/lib/bb/pysh/pyshtables.py # ../conf/ # ./ # ../qemuarm-toolchain/
Quoted 5 lines
nothing added to commit but untracked files present (use "git add" to track)
The environment variables are still wrong, can I manually change them, I understand this is bad practice but I can't develop until I fix this.
Jack,
I think Jessica is travelling to Prague for ELC-E so I say change the environment variables manually and get on with your development. :-)
If you could file a bug against the ADT on bugzilla.yoctoproject.org I'm sure someone will look into this.
Looks like there may be some out of sync metadata somewhere that we need to track down.
Regards,
Joshua
Signature · 3 lines
Joshua Lock
Yocto Project "Johannes factotum"
Intel Open Source Technology CentreJack,
One other thing to check, did you do git update of your Edison branch before running a fresh build?
From: [email protected] [mailto:[email protected]] On Behalf Of Jack Mitchell
Sent: Tuesday, October 25, 2011 7:45 AM
Cc: [email protected]
Subject: Re: [yocto] Eclipse Plugin: ADT Version too old
On 24/10/2011 16:55, Zhang, Jessica wrote:
OK missed your env post. Then this is your problem:
16.export OECORE_DISTRO_VERSION="1.1+snapshot-20111021" 17.export OECORE_SDK_VERSION="1.1+snapshot"
They need to be 1.1 instead of 1.1+snapshot. You need to update your Edison branch then do "bitbake meta-ide-support"
-----Original Message-----
From: Jack Mitchell [mailto:[email protected]]
Sent: Monday, October 24, 2011 8:44 AM
To: Zhang, Jessica
Cc: [email protected]<mailto:[email protected]>
Subject: Re: [yocto] Eclipse Plugin: ADT Version too old
On 24/10/2011 16:42, Zhang, Jessica wrote:
Hi Jack,
So you mean you did "bitbake meta-ide-support" to use the build tree?
I just tried with my Edison build tree mode on my laptop and it works fine. So can you check under your build/tmp directory, there should be an environment-setup-*-poky-linux file, where * is your target arch. At the end file do you have several OECORE_* settings ? If not, you need to rerun "bitbake meta-ide-support" and ensure there're OECORE_* settings at the end.
Thanks,
Jessica
-----Original Message-----
From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Jack Mitchell
Sent: Monday, October 24, 2011 2:24 AM
To: [email protected]<mailto:[email protected]>
Subject: Re: [yocto] Eclipse Plugin: ADT Version too old
On 24/10/2011 10:18, Lu, Lianhao wrote:
Jack Mitchell wrote on 2011-10-24:
I am trying to use the new eclipse plugin, which I have had working fine for the past couple of weeks until I switched from the master branch to edison.
I performed a fresh build using the stable edison branch, installed the new 1.1 eclipse plugin and now whenever I try to setup the Yocto eclipse environment I receive the following error:
Yocto Preferences Configuration Error!
OECORE related items are not found in envrionement setup files. The ADT version you're using is too old.
Please upgrade to our latest ADT Version!
This pops up in a message box, not the eclipse console. I have
followed the ADT Setup guide to the letter and it's not playing ball -
could someone confirm this as working or point me towards a reason why I may be getting this error?
Hi Jack,
How did you install your ADT? You can check the ADT version by "cat" the file /opt/poky/${version}/version-xxxx, where xxxx is your target sys architecture.
-Lianhao
_______________________________________________
yocto mailing list [email protected]<mailto:[email protected]>
https://lists.yoctoproject.org/listinfo/yocto
Hi Lianhao,
I am using the yocto build tree so I don't have an installed ADT in /opt but one that has been generated within my build directory, this is correct yes?
Jack.
_______________________________________________
yocto mailing list [email protected]<mailto:[email protected]>
https://lists.yoctoproject.org/listinfo/yocto
Hi Jessica,
I posted my environment settings earlier, which are located here:
http://pastebin.com/4vnWPAD2
Yes, I did use bitbake meta-ide-support to build my roo
Hi Jessica,
I just did a full fresh re-build from scratch and now my environment variables are as follows:
My current git status is:
# On branch edision
# Untracked files:
# (use "git add <file>..." to include in what will be committed)
#
# ../bitbake/lib/bb/pysh/pyshtables.py # ../conf/ # ./ # ../qemuarm-toolchain/
nothing added to commit but untracked files present (use "git add" to track)
The environment variables are still wrong, can I manually change them, I understand this is bad practice but I can't develop until I fix this.
t.
Quoted 17 lines · Jack Mitchell
Hi Jessica,
I posted my environment settings earlier, which are located here:
http://pastebin.com/4vnWPAD2Yes, I did use bitbake meta-ide-support to build my roo
Hi Jessica,
I just did a full fresh re-build from scratch and now my environment variables are as follows:
My current git status is:
Quoted 9 lines
# On branch edision
# Untracked files:
# (use "git add <file>..." to include in what will be committed) #
#../bitbake/lib/bb/pysh/pyshtables.py
# ../conf/
# ./
# ../qemuarm-toolchain/
nothing added to commit but untracked files present (use "git add" to track)
Jack,
I just checked out a clean edison and ran bitbake meta-ide-support. My env is showing export OECORE_DISTRO_VERSION="1.1". My guess is that, since you are not in master, then you have a TMPDIR from a master build, or perhaps are using something left over from one, as the only place DISTRO_VERSION = "1.1+snapshot-${DATE}" would be there. Prior to c88b991 on edison, DISTRO_VERSION = "1.0+snapshot-${DATE}". So you're picking that up from some prior master build. It's not an older version of edison as if it was an older version of edison it would be 1.0+snapshot-${DATE
-b
Signature · 3 lines
Elizabeth Flanagan Yocto Project Build and Release
Quoted 38 lines · Elizabeth
Quoted 20 lines · Jack Mitchell
Hi Jessica,
I posted my environment settings earlier, which are located here:
http://pastebin.com/4vnWPAD2Yes, I did use bitbake meta-ide-support to build my roo
Hi Jessica,
I just did a full fresh re-build from scratch and now my environment variables are as follows:
My current git status is:
# On branch edision
# Untracked files:
# (use "git add<file>..." to include in what will be committed)
#Quoted 5 lines
# ../bitbake/lib/bb/pysh/pyshtables.py # ../conf/ # ./ # ../qemuarm-toolchain/nothing added to commit but untracked files present (use "git add" to track)
Jack,
I just checked out a clean edison and ran bitbake meta-ide-support. My env is showing export OECORE_DISTRO_VERSION="1.1". My guess is that, since you are not in master, then you have a TMPDIR from a master build, or perhaps are using something left over from one, as the only place
DISTRO_VERSION= "1.1+snapshot-${DATE}" would be there. Prior to c88b991 on edison,DISTRO_VERSION= "1.0+snapshot-${DATE}". So you're picking that up from some prior master build. It's not an older version of edison as if it was an older version of edison it would be 1.0+snapshot-${DATE
Quoted 2 lines
-b
Ok, this is some more debug info:
OE Build Configuration:
BB_VERSION = "1.13.3" TARGET_ARCH = "arm" TARGET_OS = "linux-gnueabi" MACHINE = "qemuarm" DISTRO = "poky" DISTRO_VERSION = "1.1+snapshot-20111026" TUNE_FEATURES = "armv5 dsp thumb arm926ejs" TARGET_FPU = "soft"
meta
meta-yocto
meta-db-generic = "edision:b4757833c3548b5ee3a1cce58e2f059b3f63cb09"
Could it be that because I have my own layer present it's skewing the git? Should the eclipse plug-in not match 1.1*?
Could you check your file of meta-yocto/conf/distro/poky.conf for the variable DISTRO_VERSION, it should be "1.1'.
It does indeed state 1.1.
Jack,
I push out a support in Eclipse for post 1.1 (1.1+snapshort*), you can update your eclipse plug-in against latest eclipse-poky master following the steps in the ADT manual. But it seems you still have some strange thing going on with your Edison build, it shouldn't contain "1.1+snapshot*" as version for both distro and adt.
Cheers,
Jessica
From: [email protected] [mailto:[email protected]] On Behalf Of Jack Mitchell
Sent: Wednesday, October 26, 2011 1:20 AM
Cc: [email protected]
Subject: Re: [yocto] Eclipse Plugin: ADT Version too old
On 25/10/2011 22:40, Flanagan, Elizabeth wrote:
On Tue, Oct 25, 2011 at 7:45 AM, Jack Mitchell <[email protected]><mailto:[email protected]> wrote:
Hi Jessica,
I posted my environment settings earlier, which are located here:
http://pastebin.com/4vnWPAD2
Yes, I did use bitbake meta-ide-support to build my roo
Hi Jessica,
I just did a full fresh re-build from scratch and now my environment variables are as follows:
My current git status is:
# On branch edision
# Untracked files:
# (use "git add <file>..." to include in what will be committed)
#
# ../bitbake/lib/bb/pysh/pyshtables.py # ../conf/ # ./ # ../qemuarm-toolchain/
nothing added to commit but untracked files present (use "git add" to track)
Jack,
I just checked out a clean edison and ran bitbake meta-ide-support. My env is showing export OECORE_DISTRO_VERSION="1.1". My guess is that, since you are not in master, then you have a TMPDIR from a master build, or perhaps are using something left over from one, as the only place DISTRO_VERSION = "1.1+snapshot-${DATE}" would be there. Prior to c88b991 on edison, DISTRO_VERSION = "1.0+snapshot-${DATE}". So you're picking that up from some prior master build. It's not an older version of edison as if it was an older version of edison it would be 1.0+snapshot-${DATE
-b
Ok, this is some more debug info:
OE Build Configuration:
BB_VERSION = "1.13.3" TARGET_ARCH = "arm" TARGET_OS = "linux-gnueabi" MACHINE = "qemuarm" DISTRO = "poky" DISTRO_VERSION = "1.1+snapshot-20111026" TUNE_FEATURES = "armv5 dsp thumb arm926ejs" TARGET_FPU = "soft"
meta
meta-yocto
meta-db-generic = "edision:b4757833c3548b5ee3a1cce58e2f059b3f63cb09"
Could it be that because I have my own layer present it's skewing the git? Should the eclipse plug-in not match 1.1*?
Could you check your file of meta-yocto/conf/distro/poky.conf for the variable DISTRO_VERSION, it should be "1.1'.
It does indeed state 1.1.
Jack Mitchell wrote on 2011-10-25:
Quoted 10 lines
Hi Jessica,
I just did a full fresh re-build from scratch and now my environment variables are as follows:
My current git status is:
Quoted 9 lines
# On branch edision # Untracked files: # (use "git add <file>..." to
include in what will be committed) # #../bitbake/lib/bb/pysh/pyshtables.py# ../conf/ # ./ #
../qemuarm-toolchain/ nothing added to commit but untracked files present (use "git add" to track)The environment variables are still wrong, can I manually change them, I understand this is bad practice but I can't develop until I fix this.
Jack,
You may manually change them, but I doubt this suggesting that there might be some mismatch in your local git branch. The "bitbake meta-ide-support" of Edison branch on my machine could generate the right OECORE_DISTRO_VERSION and OECORE_SDK_VERSION, with the value of "1.1", not "1.1+snapshot".
Could you check your file of meta-yocto/conf/distro/poky.conf for the variable DISTRO_VERSION, it should be "1.1'.
b.t.w. When you "bitbake meta-ide-support", there will be some configuration information on the console which might help you identify the version and configurations, e.g.
OE Build Configuration:
BB_VERSION = "1.13.3" TARGET_ARCH = "arm" TARGET_OS = "linux-gnueabi" MACHINE = "qemuarm" DISTRO = "poky" DISTRO_VERSION = "1.1" TUNE_FEATURES = "armv5 dsp thumb arm926ejs" TARGET_FPU = "soft"
meta
meta-yocto = "(nobranch):1924f52cc894d4dd6b9d9c1a2248b32fc0a24c8c"
Best Regards,
Lianhao