Qt program with GUI issue
I'm trying to get my program integrated into BR. So far I managed to successfully build and install it, but as soon as I run it (with -qws option) I get trouble:
GUI will be shown, but at the same time background/wallpaper goes green (I made nothing to make this happen). When I move my mouse, the pointer seems to draw over GUI, so that real gray background will show up at the places where mouse pointer went through.
Is there any simple QT based project I could try to integrate as a reference? I tried CuteCom, but it is fully Qt4 compatible.
Another issue if I don't supply -qws param, I get following error messages:
QWSSocket::connectToLocalFile could not connect:: No such file or directory
My system:
ARM Cortex-A8
WindowsManager: Fluxbox
Yegor
Am 26.10.2011 14:59, schrieb Yegor Yefremov:
Quoted 6 lines
I'm trying to get my program integrated into BR. So far I managed to successfully build and install it, but as soon as I run it (with -qws option) I get trouble:
GUI will be shown, but at the same time background/wallpaper goes green (I made nothing to make this happen). When I move my mouse, the pointer seems to draw over GUI, so that real gray background will show up at the places where mouse pointer went through.
Is there any simple QT based project I could try to integrate as a reference? I tried CuteCom, but it is fully Qt4 compatible.
Quoted 7 lines
Another issue if I don't supply -qws param, I get following error messages:
QWSSocket::connectToLocalFilecould not connect:: No such file or directoryMy system:
ARM Cortex-A8
WindowsManager: Fluxbox
I managed to get RenameX (http://dev.creabox.biz/RenameX/index.php) compiled, but when started I get the same result.
So I think it has something to do with an interface between Qt and X11. Can someone, who managed to create/use a Qt based graphical application, share his/her experience/.config?
Regards,
Yegor
Quoted 15 lines · Yegor Yefremov
Am 26.10.2011 14:59, schrieb Yegor Yefremov:
Quoted 13 lines
I'm trying to get my program integrated into BR. So far I managed to successfully build and install it, but as soon as I run it (with -qws option) I get trouble:
GUI will be shown, but at the same time background/wallpaper goes green (I made nothing to make this happen). When I move my mouse, the pointer seems to draw over GUI, so that real gray background will show up at the places where mouse pointer went through.
Is there any simple QT based project I could try to integrate as a reference? I tried CuteCom, but it is fully Qt4 compatible.
Another issue if I don't supply -qws param, I get following error messages:
QWSSocket::connectToLocalFilecould not connect:: No such file or directoryMy system:
ARM Cortex-A8
WindowsManager: Fluxbox
Hi Yegor,
It sounds like you are trying to run a Qt embedded app with the X window system. This is not possible, Qt embedded works without X using the frame buffer directly. The reason you have to use -qws when running your app is that specifies that the process should act as a window server. It is this window server that is filling the screen green (This is the qws default) and the mouse draw error will be it interfering with X.
You either should remove X from your target or you need to build the X11 version of Qt. Although cross compiling Qt for X11 is not officially supported (in both Qt and buildroot) I have got it working (for x86 at least) and submitted a patch a few weeks back. Got some feedback on it that suggested it need changes for others archs but it should be a good starting point. If you need more help getting the X11 cross compile working I'll try to help.
Will
Signature · 5 lines
------------------------------------------------------------------------ Will Wagner will_wagner at carallon.com Development Manager Office Tel: +44 (0)20 7371 2032 Carallon Ltd, Studio G20, Shepherds Building, Rockley Rd, London W14 0DA ------------------------------------------------------------------------
Am 26.10.2011 17:19, schrieb Will Wagner:
Quoted 17 lines · Yegor Yefremov
Quoted 15 lines
Am 26.10.2011 14:59, schrieb Yegor Yefremov:
Quoted 13 lines
I'm trying to get my program integrated into BR. So far I managed to successfully build and install it, but as soon as I run it (with -qws option) I get trouble:
GUI will be shown, but at the same time background/wallpaper goes green (I made nothing to make this happen). When I move my mouse, the pointer seems to draw over GUI, so that real gray background will show up at the places where mouse pointer went through.
Is there any simple QT based project I could try to integrate as a reference? I tried CuteCom, but it is fully Qt4 compatible.
Another issue if I don't supply -qws param, I get following error messages:
QWSSocket::connectToLocalFilecould not connect:: No such file or directoryMy system:
ARM Cortex-A8
WindowsManager: Fluxbox
Quoted 5 lines
Hi Yegor,
It sounds like you are trying to run a Qt embedded app with the X window system. This is not possible, Qt embedded works without X using the frame buffer directly. The reason you have to use -qws when running your app is that specifies that the process should act as a window server. It is this window server that is filling the screen green (This is the qws default) and the mouse draw error will be it interfering with X.
You either should remove X from your target or you need to build the X11 version of Qt. Although cross compiling Qt for X11 is not officially supported (in both Qt and buildroot) I have got it working (for x86 at least) and submitted a patch a few weeks back. Got some feedback on it that suggested it need changes for others archs but it should be a good starting point. If you need more help getting the X11 cross compile working I'll try to help.
Thank you for explanations. Now I see the difference. So I got it running in Qt Embedded mode.
As to X11, I tried your patch, but it produces compiler errors for ARM so it really have to be reworked to properly support other platforms. As for now I'll try to finish my testing app first and then we could fix the patch.
Yegor
Hi Yegor,
Le 26/10/2011 14:59, Yegor Yefremov a ?crit :
Quoted 12 lines
I'm trying to get my program integrated into BR. So far I managed to successfully build and install it, but as soon as I run it (with -qws option) I get trouble:
GUI will be shown, but at the same time background/wallpaper goes green (I made nothing to make this happen). When I move my mouse, the pointer seems to draw over GUI, so that real gray background will show up at the places where mouse pointer went through.
Is there any simple QT based project I could try to integrate as a reference? I tried CuteCom, but it is fully Qt4 compatible.
Quoted 8 lines
Another issue if I don't supply -qws param, I get following error messages:
QWSSocket::connectToLocalFilecould not connect:: No such file or directoryMy system: ARM Cortex-A8 WindowsManager: Fluxbox
you are trying to run a qtembedded project (with its own graphic server) in a windows manager running under X : this means both write to the framebuffer leading to your problem (qt draws the interface and the green background and when you move the mouse X refresh the area with it's content (and thus fluxbox's one)).
The solution is :
- either to kill X and run your application with qws then that will work (you may need to add some parameters in the environment variable QWS_MOUSE_PROTO for the input devices)
- either to compile your application with qt for X and run it under X (but I think buildroot doesn't support QT for X so you are on your own here)
Eric