arm: jadecpu: Readd MACH_TYPE_JADECPU
PATCH 1/1 arm: jadecpu: Readd MACH_TYPE_JADECPU
MACH_TYPE_JADECPU was removed from mach-types.h. Add it to board config file.
--- board/syteco/jadecpu/jadecpu.c | 1 - include/configs/jadecpu.h | 6 ++++++ 2 files changed, 6 insertions(+), 1 deletions(-)
board/syteco/jadecpu/jadecpu.c +0 -1
@@ -40,7 +40,6 @@ int board_init(void)writel (0x00000010 , &ccnt->cmux_md); gd->flags =0 ; - gd->bd->bi_arch_number =MACH_TYPE_JADECPU ; gd->bd->bi_boot_params =PHYS_SDRAM +PHYS_SDRAM_SIZE -0x10000 ;icache_enable ();
include/configs/jadecpu.h +6 -0
@@ -37,6 +37,12 @@#define CONFIG_USE_ARCH_MEMCPY #define CONFIG_USE_ARCH_MEMSET +#ifndef MACH_TYPE_JADECPU +#define MACH_TYPE_JADECPU 2636 +#endif + +#define CONFIG_MACH_TYPE MACH_TYPE_JADECPU +/* * Environment settings */
Signature · 1 line
1.7.4.1
PATCH 1/1 arm: jadecpu: Readd MACH_TYPE_JADECPU
Quoted 4 lines · Matthias Weisser
MACH_TYPE_JADECPUwas removed frommach-types.h. Add it to board config file.Signed-off-by Matthias Weisser <[email protected]>
Quoted 34 lines
--- board/syteco/jadecpu/jadecpu.c | 1 - include/configs/jadecpu.h | 6 ++++++ 2 files changed, 6 insertions(+), 1 deletions(-)board/syteco/jadecpu/jadecpu.c +0
-1@@ -40,7 +40,6 @@ int board_init(void)writel (0x00000010 , &ccnt->cmux_md); gd->flags =0 ; - gd->bd->bi_arch_number =MACH_TYPE_JADECPU ; gd->bd->bi_boot_params =PHYS_SDRAM +PHYS_SDRAM_SIZE -0x10000 ;icache_enable ();include/configs/jadecpu.h +6
-0@@ -37,6 +37,12 @@#define CONFIG_USE_ARCH_MEMCPY #define CONFIG_USE_ARCH_MEMSET +#ifndef MACH_TYPE_JADECPU +#define MACH_TYPE_JADECPU 2636 +#endif + +#define CONFIG_MACH_TYPE MACH_TYPE_JADECPU +/* * Environment settings */
Signature · 2 lines
Regards, Igor.
Albert ARIBAUD
NAKPATCH 1/1 arm: jadecpu: Readd MACH_TYPE_JADECPU
In reply to Matthias WeisserHi Matthias,
Le 31/10/2011 08:26, Matthias Weisser a ?crit :
Quoted 26 lines
MACH_TYPE_JADECPUwas removed frommach-types.h. Add it to board config file.Signed-off-by Matthias Weisser<[email protected]>--- board/syteco/jadecpu/jadecpu.c | 1 - include/configs/jadecpu.h | 6 ++++++ 2 files changed, 6 insertions(+), 1 deletions(-)board/syteco/jadecpu/jadecpu.c +0
-1@@ -40,7 +40,6 @@ int board_init(void)writel (0x00000010 ,&ccnt->cmux_md); gd->flags =0 ; - gd->bd->bi_arch_number =MACH_TYPE_JADECPU ; gd->bd->bi_boot_params =PHYS_SDRAM +PHYS_SDRAM_SIZE -0x10000 ;icache_enable ();include/configs/jadecpu.h +0
-0
include/configs/jadecpu.h line 42
Quoted 6 lines
include/configs/jadecpu.h +3
-0@@ -37,6 +37,12 @@#define CONFIG_USE_ARCH_MEMCPY #define CONFIG_USE_ARCH_MEMSET +#ifndef MACH_TYPE_JADECPU +#define MACH_TYPE_JADECPU 2636 +#endif
NAK -- remove ifndef/endif around definition. This way, if/when mach type reappears in official mach-type.h, we will get a warning about your mach-type being defined twice.
include/configs/jadecpu.h line 48
Quoted 5 lines
include/configs/jadecpu.h +2
-0+#define CONFIG_MACH_TYPE MACH_TYPE_JADECPU +/* * Environment settings */
Amicalement,
Signature · 1 line
Albert.
PATCH 1/1 arm: jadecpu: Readd MACH_TYPE_JADECPU
Dear Albert ARIBAUD,
Quoted 8 lines · In message <[email protected]> you wrote:
include/configs/jadecpu.h line 42
Quoted 4 lines
include/configs/jadecpu.h +3
-0+#ifndef MACH_TYPE_JADECPU +#define MACH_TYPE_JADECPU 2636 +#endif NAK -- remove ifndef/endif around definition. This way, if/when mach type reappears in official
mach-type.h, we will get a warning about your mach-type being defined twice.
Note that you will only get a warning if a _different_ value get's defined (``warning: "VAR" redefined''). If both values are the same, no warning will be raised.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
If the facts don't fit the theory, change the facts.
-- Albert EinsteinPATCH 1/1 arm: jadecpu: Readd MACH_TYPE_JADECPU
Le 05/11/2011 14:26, Wolfgang Denk a ?crit :
Quoted 12 lines
Dear Albert ARIBAUD,
Quoted 8 lines · In message<[email protected]> you wrote:
include/configs/jadecpu.h line 42
Quoted 4 lines
include/configs/jadecpu.h +3
-0+#ifndef MACH_TYPE_JADECPU +#define MACH_TYPE_JADECPU 2636 +#endif NAK -- remove ifndef/endif around definition. This way, if/when mach type reappears in official
mach-type.h, we will get a warning about your mach-type being defined twice.
Quoted 3 lines
Note that you will only get a warning if a _different_ value get's defined (``warning: "VAR" redefined''). If both values are the same, no warning will be raised.
Hmm, correct. In order to catch the mach-type creeping back in mach-types.h, we'd need to define something like
#define MACH_TYPE_JADECPU (2636)
I'll post an ARM-global patch for this, but as it will obviously not be a bugfix, it'll wait until next merge window.
Quoted 3 lines
Best regards,
Wolfgang Denk
Amicalement,
Signature · 1 line
Albert.
PATCH 1/1 arm: jadecpu: Readd MACH_TYPE_JADECPU
Dear Albert ARIBAUD,
Quoted 5 lines · In message <[email protected]> you wrote:
Quoted 4 lines
Note that you will only get a warning if a _different_ value get's defined (``warning: "VAR" redefined''). If both values are the same, no warning will be raised.
Quoted 7 lines
Hmm, correct. In order to catch the mach-type creeping back in
mach-types.h, we'd need to define something like#define MACH_TYPE_JADECPU (2636)I'll post an ARM-global patch for this, but as it will obviously not be a bugfix, it'll wait until next merge window.
Please save the effort. Waht would it be good for? As long as the values are the same, it's OK anyway. And if they should be different, we get a bunch of warnings.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de I am pleased to see that we have differences. May we together become greater than the sum of both of us. -- Surak of Vulcan, "The Savage Curtain", stardate 5906.4
PATCH 1/1 arm: jadecpu: Readd MACH_TYPE_JADECPU
Le 05/11/2011 15:56, Wolfgang Denk a ?crit :
Quoted 11 lines
Dear Albert ARIBAUD,
Quoted 8 lines · In message<[email protected]> you wrote:
Quoted 4 lines
Note that you will only get a warning if a _different_ value get's defined (``warning: "VAR" redefined''). If both values are the same, no warning will be raised.
Hmm, correct. In order to catch the mach-type creeping back in
mach-types.h, we'd need to define something like
Quoted 8 lines
Quoted 4 lines
#define MACH_TYPE_JADECPU (2636)I'll post an ARM-global patch for this, but as it will obviously not be a bugfix, it'll wait until next merge window.
Please save the effort. Waht would it be good for? As long as the values are the same, it's OK anyway. And if they should be different, we get a bunch of warnings.
Just wanted to make sure we know when the temporary MACH_TYPE addition in the config header becomes obsolete. But then, I can also run a grep on include/configs/*.h whenever mach-types.h is updated.
Quoted 3 lines
Best regards,
Wolfgang Denk
Amicalement,
Signature · 1 line
Albert.
PATCH v2 1/1 arm: jadecpu: Readd MACH_TYPE_JADECPU
In reply to Matthias WeisserMACH_TYPE_JADECPU was removed from mach-types.h. Add it to board config file.
---
Changes in V2:
Removed ifdef around MACH_TYPE
board/syteco/jadecpu/jadecpu.c | 1 - include/configs/jadecpu.h | 6 ++++++ 2 files changed, 6 insertions(+), 1 deletions(-)
board/syteco/jadecpu/jadecpu.c +0 -1
@@ -40,7 +40,6 @@ int board_init(void)writel (0x00000010 , &ccnt->cmux_md); gd->flags =0 ; - gd->bd->bi_arch_number =MACH_TYPE_JADECPU ; gd->bd->bi_boot_params =PHYS_SDRAM +PHYS_SDRAM_SIZE -0x10000 ;icache_enable ();
include/configs/jadecpu.h +4 -0
@@ -37,6 +37,10 @@#define CONFIG_USE_ARCH_MEMCPY #define CONFIG_USE_ARCH_MEMSET +#define MACH_TYPE_JADECPU 2636 + +#define CONFIG_MACH_TYPE MACH_TYPE_JADECPU +/* * Environment settings */
Signature · 1 line
1.7.4.1
PATCH v2 1/1 arm: jadecpu: Readd MACH_TYPE_JADECPU
Hi Matthias,
Le 05/11/2011 13:15, Matthias Weisser a ?crit :
Quoted 29 lines
MACH_TYPE_JADECPUwas removed frommach-types.h. Add it to board config file.Signed-off-by Matthias Weisser<[email protected]>---
Changes in V2:
Removed ifdef aroundMACH_TYPEboard/syteco/jadecpu/jadecpu.c | 1 - include/configs/jadecpu.h | 6 ++++++ 2 files changed, 6 insertions(+), 1 deletions(-)board/syteco/jadecpu/jadecpu.c +0
-1@@ -40,7 +40,6 @@ int board_init(void)writel (0x00000010 ,&ccnt->cmux_md); gd->flags =0 ; - gd->bd->bi_arch_number =MACH_TYPE_JADECPU ; gd->bd->bi_boot_params =PHYS_SDRAM +PHYS_SDRAM_SIZE -0x10000 ;icache_enable ();include/configs/jadecpu.h +0
-0
include/configs/jadecpu.h line 46
Quoted 10 lines
include/configs/jadecpu.h +4
-0@@ -37,6 +37,10 @@#define CONFIG_USE_ARCH_MEMCPY #define CONFIG_USE_ARCH_MEMSET +#define MACH_TYPE_JADECPU 2636 + +#define CONFIG_MACH_TYPE MACH_TYPE_JADECPU +/* * Environment settings */
Applied to u-boot-arm/master, thanks!
Amicalement,
Signature · 1 line
Albert.