Skip to contentSkip to conversation

Ethernut 5 board support

PATCH New Tim Schendekehl 5 participants 5 messages Nov 2, 2011 – Dec 8, 2011

lore
Share & tools
lore

Tim Schendekehl

author
#0 lore raw

PATCH v4 1/1 Ethernut 5 board support

Add support for the Ethernut 5 open hardware design, based on Atmel's AT91SAM9XE512 SoC.

V4
- Fix several coding style issues.
- Move machine type to config file.
- Remove use of CONFIG_ATMEL_LEGACY.

Signed-off-by Tim Schendekehl <[email protected]>
---
 MAINTAINERS                               |    4 +
 board/egnite/ethernut5/Makefile           |   48 ++++
 board/egnite/ethernut5/ethernut5.c        |  270 +++++++++++++++++++++++
 board/egnite/ethernut5/ethernut5_pwrman.c |  338 +++++++++++++++++++++++++++++
 board/egnite/ethernut5/ethernut5_pwrman.h |   68 ++++++
 boards.cfg                                |    1 +
 include/configs/ethernut5.h               |  287 ++++++++++++++++++++++++
 7 files changed, 1016 insertions(+), 0 deletions(-)
 create mode 100644 board/egnite/ethernut5/Makefile
 create mode 100644 board/egnite/ethernut5/ethernut5.c
 create mode 100644 board/egnite/ethernut5/ethernut5_pwrman.c
 create mode 100644 board/egnite/ethernut5/ethernut5_pwrman.h
 create mode 100644 include/configs/ethernut5.h
MAINTAINERS +4 -0
index 21d1fef..1870ee1 100644
@@ -142,6 +142,10 @@ Phil Edworthy <[email protected]>
 
 	rsk7264		SH7264
 
+egnite GmbH <[email protected]>
+
+	ethernut5	ARM926EJS (AT91SAM9XE SoC)
+
 Dirk Eibach <[email protected]>
 
 	devconcenter	PPC460EX
board/egnite/ethernut5/Makefile new file +48 -0

48 lines not on this page · raw message

board/egnite/ethernut5/ethernut5.c new file +270 -0

270 lines not on this page · raw message

board/egnite/ethernut5/ethernut5_pwrman.c new file +338 -0

338 lines not on this page · raw message

board/egnite/ethernut5/ethernut5_pwrman.h new file +68 -0

68 lines not on this page · raw message

boards.cfg +1 -0
index 8bd91c5..04aa3dd 100644
@@ -110,6 +110,7 @@ cpu9G20                      arm         arm926ejs   cpu9260             eukrea
 cpu9G20_nand                 arm         arm926ejs   cpu9260             eukrea         at91        cpu9260:CPU9G20,NANDBOOT
 cpu9G20_128M                 arm         arm926ejs   cpu9260             eukrea         at91        cpu9260:CPU9G20,CPU9G20_128M
 cpu9G20_nand_128M            arm         arm926ejs   cpu9260             eukrea         at91        cpu9260:CPU9G20,CPU9G20_128M,NANDBOOT
+ethernut5                    arm         arm926ejs   ethernut5           egnite         at91        ethernut5:AT91SAM9XE
 top9000eval_xe               arm         arm926ejs   top9000             emk            at91        top9000:EVAL9000
 top9000su_xe                 arm         arm926ejs   top9000             emk            at91        top9000:SU9000
 meesc                        arm         arm926ejs   meesc               esd            at91        meesc:AT91SAM9263,SYS_USE_NANDFLASH
include/configs/ethernut5.h new file +287 -0

287 lines not on this page · raw message

Signature · 1 line
1.7.1
#1 lore raw

PATCH v4 1/1 Ethernut 5 board support

Dear Maintainers,

Quoted 2 lines · Tim Schendekehl

Add support for the Ethernut 5 open hardware design, based on Atmel's AT91SAM9XE512 SoC.

Any chance to get this patch reviewed before it's becoming outdated again?

Many thanks,

Harald

#2 lore raw

PATCH v4 1/1 Ethernut 5 board support

Dear Harald,

Quoted 7 lines · On Fri, 18 Nov 2011 20:30:28 +0100 Harald Kipp <[email protected]> wrote:

Dear Maintainers,

Quoted 2 lines · Tim Schendekehl

Add support for the Ethernut 5 open hardware design, based on Atmel's AT91SAM9XE512 SoC.

Any chance to get this patch reviewed before it's becoming outdated again?

The patch looks good, it is checkpatch-clean, applies cleanly on u-boot.git/master and u-boot-arm.git/master and compiles on current top of tree. All review comments for v3 were addressed, so I think it can be queued for upcoming release. I delegated the patch in patchwork to Albert (ARM custodian, on CC).

Albert, could you look at the patch and queue it. Thanks!

Best regards,
Anatolij

#3 lore raw

PATCH v4 1/1 Ethernut 5 board support

In reply to Harald Kipp

Dear Harald Kipp,

Quoted 7 lines · In message <[email protected]> you wrote:

Dear Maintainers,

Quoted 2 lines · Tim Schendekehl

Add support for the Ethernut 5 open hardware design, based on Atmel's AT91SAM9XE512 SoC.

Any chance to get this patch reviewed before it's becoming outdated again?

It might help to put the responsible custodian on Cc:

Also, sticking to the correct patch format (like putting comments not into the commitm essage, but into the comment section, i. e. _below_ the "---" line) increases your chances.

Best regards,

Wolfgang Denk

Signature · 6 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I object to intellect without discipline;  I object to power without
constructive purpose.
	-- Spock, "The Squire of Gothos", stardate 2124.5
#4 lore raw

PATCH v4 1/1 Ethernut 5 board support

Le 05/12/2011 22:45, Wolfgang Denk a ?crit :

Quoted 9 lines

Dear Harald Kipp,

Quoted 6 lines · In message<[email protected]> you wrote:

Dear Maintainers,

Quoted 2 lines · Tim Schendekehl

Add support for the Ethernut 5 open hardware design, based on Atmel's AT91SAM9XE512 SoC.

Quoted 7 lines
Quoted 1 line

Any chance to get this patch reviewed before it's becoming outdated again?

It might help to put the responsible custodian on Cc:

Also, sticking to the correct patch format (like putting comments not into the commitm essage, but into the comment section, i. e. _below_ the "---" line) increases your chances.

For information, this patch is now in u-boot/master.

Quoted 3 lines

Best regards,

Wolfgang Denk

Amicalement,

Signature · 1 line
Albert.