ARM: dig297: Define MACH_TYPE_OMAP3_CPS for DIG297 board
PATCH 1/1 ARM: dig297: Define MACH_TYPE_OMAP3_CPS for DIG297 board
This was dropped in the latest mach-types sync (47af6f61bcd9) because it is not mainlined in Linux.
--- include/configs/dig297.h | 7 +++++++ 1 files changed, 7 insertions(+), 0 deletions(-)
include/configs/dig297.h +7 -0
@@ -32,6 +32,13 @@#ifndef __CONFIG_H#define __CONFIG_H +#include <asm/mach-types.h> +#ifdef MACH_TYPE_OMAP3_CPS +#error "MACH_TYPE_OMAP3_CPS has been defined properly, please remove this." +#else +#define MACH_TYPE_OMAP3_CPS 2751 +#endif +/* * High Level Configuration Options */
Signature · 1 line
1.7.5.4
PATCH 2/2 ARM: dig297: define CONFIG_MACH_TYPE
--- board/comelit/dig297/dig297.c | 2 -- include/configs/dig297.h | 1 + 2 files changed, 1 insertions(+), 2 deletions(-)
board/comelit/dig297/dig297.c +0 -2
@@ -91,8 +91,6 @@ static const u32 gpmc_lan_config[] = {int board_init (void ) {gpmc_init ();/* in SRAM or SDRAM, finish GPMC */ -/* board id for Linux */ - gd->bd->bi_arch_number =MACH_TYPE_OMAP3_CPS ;/* boot param addr */ gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 +0x100 );
include/configs/dig297.h +1 -0
@@ -38,6 +38,7 @@#else #define MACH_TYPE_OMAP3_CPS 2751#endif +#define CONFIG_MACH_TYPE MACH_TYPE_OMAP3_CPS/* * High Level Configuration Options
Signature · 1 line
1.7.5.4
PATCH 1/1 ARM: dig297: Define MACH_TYPE_OMAP3_CPS for DIG297 board
In reply to Luca CeresoliHi Luca,
Quoted 16 lines · Luca Ceresoli
This was dropped in the latest mach-types sync (
47af6f61bcd9) because it is not mainlined in Linux.Signed-off-by Luca Ceresoli <[email protected]>Cc Sandeep Paulraj <[email protected]>Cc Albert Aribaud <[email protected]>Cc Wolfgang Denk <[email protected]>--- include/configs/dig297.h | 7 +++++++ 1 files changed, 7 insertions(+), 0 deletions(-)include/configs/dig297.h +0
-0
include/configs/dig297.h line 40
Quoted 9 lines
include/configs/dig297.h +6
-0@@ -32,6 +32,13 @@#ifndef __CONFIG_H#define __CONFIG_H +#include <asm/mach-types.h> +#ifdef MACH_TYPE_OMAP3_CPS +#error "MACH_TYPE_OMAP3_CPS has been defined properly, please remove this." +#else +#define MACH_TYPE_OMAP3_CPS 2751 +#endif
It will be a good thing to use CONFIG_MACH_TYPE, while you are at this.
Signature · 2 lines
Regards, Igor.
PATCH v2 1/1 ARM: dig297: Define MACH_TYPE_OMAP3_CPS and CONFIG_MACH_TYPE
In reply to Luca CeresoliMACH_TYPE_OMAP3_CPS was dropped in the latest mach-types sync (47af6f61bcd9) because it is not mainlined in Linux.
---
Changed in v2: squashed the two previously separated patches as requested by Tom Rini.
board/comelit/dig297/dig297.c | 2 -- include/configs/dig297.h | 8 ++++++++ 2 files changed, 8 insertions(+), 2 deletions(-)
board/comelit/dig297/dig297.c +0 -2
@@ -91,8 +91,6 @@ static const u32 gpmc_lan_config[] = {int board_init (void ) {gpmc_init ();/* in SRAM or SDRAM, finish GPMC */ -/* board id for Linux */ - gd->bd->bi_arch_number =MACH_TYPE_OMAP3_CPS ;/* boot param addr */ gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 +0x100 );
include/configs/dig297.h +8 -0
@@ -32,6 +32,14 @@#ifndef __CONFIG_H#define __CONFIG_H +#include <asm/mach-types.h> +#ifdef MACH_TYPE_OMAP3_CPS +#error "MACH_TYPE_OMAP3_CPS has been defined properly, please remove this." +#else +#define MACH_TYPE_OMAP3_CPS 2751 +#endif +#define CONFIG_MACH_TYPE MACH_TYPE_OMAP3_CPS +/* * High Level Configuration Options */
Signature · 1 line
1.7.5.4