Documentation: thinkpad-acpi grammo fixes
Subsystems (3)
A message that is not in the archive (sent off-list or not yet received): [email protected]
PATCH 2/8 Documentation: thinkpad-acpi grammo fixes
From: Kumar Appaiah <[email protected]>
This commit adds minor grammatical fixes to the description of the keys in the thinkpad-acpi documentation.
--- Documentation/laptops/thinkpad-acpi.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
Documentation/laptops/thinkpad-acpi.txt +2 -2
@@ -411,9 +411,9 @@ event code Key Notes 0x1004 0x03 FN+F4 Sleep button (ACPI sleep button semantics, i.e. sleep-to-RAM). - It is always generate some kind + It always generates some kind of event, either the hot key - event or a ACPI sleep button + event or an ACPI sleep button event. The firmware may refuse to generate further FN+F4 key presses until a S3 or S4 ACPI
PATCH 3/8 Documentation: fix inotify source file paths
In reply to a message not in the archiveFrom: Marcos Paulo de Souza <[email protected]>
Fixes the path to find the source files of the inotify subsystem.
--- Documentation/filesystems/inotify.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
Documentation/filesystems/inotify.txt +2 -1
@@ -194,7 +194,8 @@ associated with the inotify_handle, and Each watch is associated with an inotify_watch structure. Watches are chained off of each associated inotify_handle and each associated inode. -See fs/inotify.c and fs/inotify_user.c for the locking and lifetime rules. +See fs/notify/inotify/inotify_fsnotify.c and fs/notify/inotify/inotify_user.c +for the locking and lifetime rules. (vi) Rationale
PATCH 4/8 Documentation: update CodingStyle use of braces
In reply to a message not in the archiveFrom: Antonio Ospite <[email protected]>
After commit 38829dc highlight that if _only_one_ branch of a conditional statement is a single statement, then braces are to be used on both branches.
--- Documentation/CodingStyle | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
Documentation/CodingStyle +2 -2
@@ -166,8 +166,8 @@ if (condition) else do_that(); -This does not apply if one branch of a conditional statement is a single -statement. Use braces in both branches. +This does not apply if only one branch of a conditional statement is a single +statement; in the latter case use braces in both branches: if (condition) { do_this();
PATCH 5/8 Documentation: HFS is orphaned
In reply to a message not in the archiveFrom: Marcos Paulo de Souza <[email protected]>
Removed the reference of Roman Zippel, last maintainer, of orphaned HFS filesystem.
--- Documentation/filesystems/hfs.txt | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
Documentation/filesystems/hfs.txt +4 -5
@@ -1,3 +1,4 @@ +Note: This filesystem doesn't have a maintainer. Macintosh HFS Filesystem for Linux ==================================
@@ -76,8 +77,6 @@ hformat that can be used to create HFS f Credits ======= -The HFS drivers was written by Paul H. Hargrovea ([email protected]) -and is now maintained by Roman Zippel ([email protected]) at Ardis -Technologies. -Roman rewrote large parts of the code and brought in btree routines derived -from Brad Boyer's hfsplus driver (also maintained by Roman now). +The HFS drivers was written by Paul H. Hargrovea ([email protected]). +Roman Zippel ([email protected]) rewrote large parts of the code and brought +in btree routines derived from Brad Boyer's hfsplus driver.
PATCH 6/8 Documentation: Computone ip2 is orphaned
In reply to a message not in the archiveFrom: Marcos Paulo Souza <[email protected]>
Removed the email for support and fixes for orphaned ip2 driver.
--- Documentation/serial/computone.txt | 2 -- 1 file changed, 2 deletions(-)
Documentation/serial/computone.txt +0 -2
@@ -20,8 +20,6 @@ Version: 1.2.14 Date: 11/01/2001 Historical Author: Andrew Manison <[email protected]> Primary Author: Doug McNash -Support: [email protected] -Fixes and Updates: Mike Warfield <[email protected]> This file assumes that you are using the Computone drivers which are integrated into the kernel sources. For updating the drivers or installing
PATCH 7/8 Documentation: fix leds-class.txt duplicated word
In reply to a message not in the archiveFrom: Bryan Wu <[email protected]>
Fix a typo (duplicated word) in Documentation/leds/leds-class.txt
--- Documentation/leds/leds-class.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
Documentation/leds/leds-class.txt +2 -2
@@ -61,8 +61,8 @@ Hardware accelerated blink of LEDs Some LEDs can be programmed to blink without any CPU interaction. To support this feature, a LED driver can optionally implement the blink_set() function (see <linux/leds.h>). To set an LED to blinking, -however, it is better to use use the API function led_blink_set(), -as it will check and implement software fallback if necessary. +however, it is better to use the API function led_blink_set(), as it +will check and implement software fallback if necessary. To turn off blinking again, use the API function led_brightness_set() as that will not just set the LED brightness but also stop any software
PATCH 8/8 Documentation: drop as block elevator reference in switching-sched.txt
In reply to a message not in the archiveFrom: Wang Sheng-Hui <[email protected]>
Remove 'as' for as is no longer supported.
The patch is against 3.1-rc3.
as is no longer supported and we can not use 'elevator=as' any
more.
---
Documentation/block/switching-sched.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
Documentation/block/switching-sched.txt +2 -2
@@ -1,6 +1,6 @@ To choose IO schedulers at boot time, use the argument 'elevator=deadline'. -'noop', 'as' and 'cfq' (the default) are also available. IO schedulers are -assigned globally at boot time only presently. +'noop' and 'cfq' (the default) are also available. IO schedulers are assigned +globally at boot time only presently. Each io queue has a set of io scheduler tunables associated with it. These tunables control how the io scheduler works. You can find these entries