Skip to contentSkip to conversation

gpiolib: output basic details and consolidate gpio device drivers

PATCH In review Hartmut Knaack 1 participant 1 message Nov 5, 2011

Subsystems (6)
GPIO Arm/Zynq architecture Device tree Arm/nomadik/Ux500 architectures +2 more subsystems
lore
Share & tools
lore

Hartmut Knaack

author
#0 lore raw

PATCH 2/2 gpiolib: output basic details and consolidate gpio device drivers

This patch removes duplicate kernel messages, which are now output by gpiolib from the following drivers:
* gpio-adp5588
* gpio-bt8xx
* gpio-cs5535
* gpio-janz-ttl
* gpio-nomadik
* gpio-pcf857x
* gpio-xilinx
* drivers/of/gpio.c (I hope that is OK with you)

Signed-off-by Hartmut Knaack <[email protected]>

-------------------------------------------------------------

drivers/gpio/gpio-adp5588.c +2 -3
index 3525ad9..9ad1703 100644
@@ -418,9 +418,8 @@ static int __devinit adp5588_gpio_probe(struct i2c_client *client,
 	if (ret)
 		goto err_irq;
 
-	dev_info(&client->dev, "gpios %d..%d (IRQ Base %d) on a %s Rev. %d\n",
-			gc->base, gc->base + gc->ngpio - 1,
-			pdata->irq_base, client->name, revid);
+	dev_info(&client->dev, "IRQ Base: %d Rev.: %d\n",
+			pdata->irq_base, revid);
 
 	if (pdata->setup) {
 		ret = pdata->setup(client, gc->base, gc->ngpio, pdata->context);
drivers/gpio/gpio-bt8xx.c +0 -3
index ec57936..5ca4098 100644
@@ -223,9 +223,6 @@ static int bt8xxgpio_probe(struct pci_dev *dev,
 		goto err_release_mem;
 	}
 
-	printk(KERN_INFO "bt8xxgpio: Abusing BT8xx card for GPIOs %d to %d\n",
-	       bg->gpio.base, bg->gpio.base + BT8XXGPIO_NR_GPIOS - 1);
-
 	return 0;
 
 err_release_mem:
drivers/gpio/gpio-cs5535.c +0 -1
index 6e16cba..693a81b 100644
@@ -347,7 +347,6 @@ static int __devinit cs5535_gpio_probe(struct platform_device *pdev)
 	if (err)
 		goto release_region;
 
-	dev_info(&pdev->dev, "GPIO support successfully loaded.\n");
 	return 0;
 
 release_region:
drivers/gpio/gpio-janz-ttl.c +0 -2
index 813ac07..6f7fda0 100644
@@ -201,8 +201,6 @@ static int __devinit ttl_probe(struct platform_device *pdev)
 		goto out_iounmap_regs;
 	}
 
-	dev_info(&pdev->dev, "module %d: registered GPIO device\n",
-			     pdata->modno);
 	return 0;
 
 out_iounmap_regs:
drivers/gpio/gpio-nomadik.c +2 -2
index 1ebedfb..839624f 100644
@@ -1150,8 +1150,8 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev)
 
 	nmk_gpio_init_irq(nmk_chip);
 
-	dev_info(&dev->dev, "Bits %i-%i at address %p\n",
-		 nmk_chip->chip.base, nmk_chip->chip.base+31, nmk_chip->addr);
+	dev_info(&dev->dev, "at address %p\n",
+		 nmk_chip->addr);
 	return 0;
 
 out_free:
drivers/gpio/gpio-pcf857x.c +1 -4
index 7369fdd..083bede 100644
@@ -289,10 +289,7 @@ static int pcf857x_probe(struct i2c_client *client,
 	 * methods can't be called from sleeping contexts.
 	 */
 
-	dev_info(&client->dev, "gpios %d..%d on a %s%s\n",
-			gpio->chip.base,
-			gpio->chip.base + gpio->chip.ngpio - 1,
-			client->name,
+	dev_info(&client->dev, "%s\n",
 			client->irq ? " (irq ignored)" : "");
 
 	/* Let platform code set up the GPIOs and their users.
drivers/gpio/gpio-xilinx.c +0 -1
index 846fbd5..0a22418 100644
@@ -205,7 +205,6 @@ static int __devinit xgpio_of_probe(struct device_node *np)
 		       np->full_name, status);
 		return status;
 	}
-	pr_info("XGpio: %s: registered\n", np->full_name);
 	return 0;
 }
drivers/of/gpio.c +0 -2
index ef0105f..ea4f2fa 100644
@@ -198,8 +198,6 @@ int of_mm_gpiochip_add(struct device_node *np,
 	if (ret)
 		goto err2;
 
-	pr_debug("%s: registered as generic GPIO chip, base is %d\n",
-		 np->full_name, gc->base);
 	return 0;
 err2:
 	iounmap(mm_gc->regs);