merge i.MX5 into mach-imx

Hi,

The following series merges i.MX5 support into mach-imx and makes it possible to compile i.MX5 together with i.MX3/6. I originally wanted to wait until the next merge window with this, but I think we can avoid a lot of merging trouble when we just merge it during this -rc cycle. What do you think?

Sascha

Sascha Hauer (3):
ARM i.MX5: remove unnecessary includes from board files ARM i.MX: Merge i.MX5 support into mach-imx ARM i.MX: Update defconfig

 arch/arm/Makefile                                  |    1 -
 .../configs/{mx5_defconfig => imx_v6_v7_defconfig} |   60 +++--
 arch/arm/configs/mx3_defconfig                     |  144 ------------
 arch/arm/mach-imx/Kconfig                          |  239 +++++++++++++++++++
 arch/arm/mach-imx/Makefile                         |   21 ++
 arch/arm/{mach-mx5 => mach-imx}/clock-mx51-mx53.c  |    2 +-
 arch/arm/{mach-mx5/cpu.c => mach-imx/cpu-imx5.c}   |    0
 arch/arm/{mach-mx5 => mach-imx}/cpu_op-mx51.c      |    0
 arch/arm/{mach-mx5 => mach-imx}/cpu_op-mx51.h      |    0
 .../crm_regs.h => mach-imx/crm-regs-imx5.h}        |    0
 arch/arm/{mach-mx5 => mach-imx}/devices-imx50.h    |    0
 arch/arm/{mach-mx5 => mach-imx}/devices-imx51.h    |    0
 arch/arm/{mach-mx5 => mach-imx}/devices-imx53.h    |    0
 arch/arm/{mach-mx5 => mach-imx}/efika.h            |    0
 arch/arm/{mach-mx5/ehci.c => mach-imx/ehci-imx5.c} |    0
 .../eukrea_mbimx51-baseboard.c                     |    0
 .../eukrea_mbimxsd-baseboard.c                     |    0
 arch/arm/{mach-mx5 => mach-imx}/imx51-dt.c         |    0
 arch/arm/{mach-mx5 => mach-imx}/imx53-dt.c         |    0
 .../board-cpuimx51.c => mach-imx/mach-cpuimx51.c}  |    0
 .../mach-cpuimx51sd.c}                             |    0
 .../board-mx50_rdp.c => mach-imx/mach-mx50_rdp.c}  |    0
 .../board-mx51_3ds.c => mach-imx/mach-mx51_3ds.c}  |    0
 .../mach-mx51_babbage.c}                           |    0
 .../mach-mx51_efikamx.c}                           |    0
 .../mach-mx51_efikasb.c}                           |    0
 .../board-mx53_ard.c => mach-imx/mach-mx53_ard.c}  |    1 -
 .../board-mx53_evk.c => mach-imx/mach-mx53_evk.c}  |    1 -
 .../mach-mx53_loco.c}                              |    1 -
 .../board-mx53_smd.c => mach-imx/mach-mx53_smd.c}  |    1 -
 arch/arm/{mach-mx5/mm.c => mach-imx/mm-imx5.c}     |    0
 arch/arm/{mach-mx5 => mach-imx}/mx51_efika.c       |    0
 arch/arm/{mach-mx5/system.c => mach-imx/pm-imx5.c} |   89 +++++++-
 arch/arm/mach-mx5/Kconfig                          |  244 --------------------
 arch/arm/mach-mx5/Makefile                         |   26 --
 arch/arm/mach-mx5/pm-imx5.c                        |   83 -------
 arch/arm/plat-mxc/Kconfig                          |   15 +-
 37 files changed, 379 insertions(+), 549 deletions(-)
 rename arch/arm/configs/{mx5_defconfig => imx_v6_v7_defconfig} (80%)
 delete mode 100644 arch/arm/configs/mx3_defconfig
 rename arch/arm/{mach-mx5 => mach-imx}/clock-mx51-mx53.c (99%)
 rename arch/arm/{mach-mx5/cpu.c => mach-imx/cpu-imx5.c} (100%)
 rename arch/arm/{mach-mx5 => mach-imx}/cpu_op-mx51.c (100%)
 rename arch/arm/{mach-mx5 => mach-imx}/cpu_op-mx51.h (100%)
 rename arch/arm/{mach-mx5/crm_regs.h => mach-imx/crm-regs-imx5.h} (100%)
 rename arch/arm/{mach-mx5 => mach-imx}/devices-imx50.h (100%)
 rename arch/arm/{mach-mx5 => mach-imx}/devices-imx51.h (100%)
 rename arch/arm/{mach-mx5 => mach-imx}/devices-imx53.h (100%)
 rename arch/arm/{mach-mx5 => mach-imx}/efika.h (100%)
 rename arch/arm/{mach-mx5/ehci.c => mach-imx/ehci-imx5.c} (100%)
 rename arch/arm/{mach-mx5 => mach-imx}/eukrea_mbimx51-baseboard.c (100%)
 rename arch/arm/{mach-mx5 => mach-imx}/eukrea_mbimxsd-baseboard.c (100%)
 rename arch/arm/{mach-mx5 => mach-imx}/imx51-dt.c (100%)
 rename arch/arm/{mach-mx5 => mach-imx}/imx53-dt.c (100%)
 rename arch/arm/{mach-mx5/board-cpuimx51.c => mach-imx/mach-cpuimx51.c} (100%)
 rename arch/arm/{mach-mx5/board-cpuimx51sd.c => mach-imx/mach-cpuimx51sd.c} (100%)
 rename arch/arm/{mach-mx5/board-mx50_rdp.c => mach-imx/mach-mx50_rdp.c} (100%)
 rename arch/arm/{mach-mx5/board-mx51_3ds.c => mach-imx/mach-mx51_3ds.c} (100%)
 rename arch/arm/{mach-mx5/board-mx51_babbage.c => mach-imx/mach-mx51_babbage.c} (100%)
 rename arch/arm/{mach-mx5/board-mx51_efikamx.c => mach-imx/mach-mx51_efikamx.c} (100%)
 rename arch/arm/{mach-mx5/board-mx51_efikasb.c => mach-imx/mach-mx51_efikasb.c} (100%)
 rename arch/arm/{mach-mx5/board-mx53_ard.c => mach-imx/mach-mx53_ard.c} (99%)
 rename arch/arm/{mach-mx5/board-mx53_evk.c => mach-imx/mach-mx53_evk.c} (99%)
 rename arch/arm/{mach-mx5/board-mx53_loco.c => mach-imx/mach-mx53_loco.c} (99%)
 rename arch/arm/{mach-mx5/board-mx53_smd.c => mach-imx/mach-mx53_smd.c} (99%)
 rename arch/arm/{mach-mx5/mm.c => mach-imx/mm-imx5.c} (100%)
 rename arch/arm/{mach-mx5 => mach-imx}/mx51_efika.c (100%)
 rename arch/arm/{mach-mx5/system.c => mach-imx/pm-imx5.c} (58%)
 delete mode 100644 arch/arm/mach-mx5/Kconfig
 delete mode 100644 arch/arm/mach-mx5/Makefile
 delete mode 100644 arch/arm/mach-mx5/pm-imx5.c

---
 arch/arm/mach-mx5/board-mx53_ard.c  |    1 -
 arch/arm/mach-mx5/board-mx53_evk.c  |    1 -
 arch/arm/mach-mx5/board-mx53_loco.c |    1 -
 arch/arm/mach-mx5/board-mx53_smd.c  |    1 -
 4 files changed, 0 insertions(+), 4 deletions(-)

index 0d7f0ff..b88a2bc 100644
@@ -32,7 +32,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
-#include "crm_regs.h"
 #include "devices-imx53.h"
 
 #define ARD_ETHERNET_INT_B	IMX_GPIO_NR(2, 31)

index 6bea31a..c69413d 100644
@@ -37,7 +37,6 @@
 #define EVK_ECSPI1_CS1		IMX_GPIO_NR(3, 19)
 #define MX53EVK_LED		IMX_GPIO_NR(7, 7)
 
-#include "crm_regs.h"
 #include "devices-imx53.h"
 
 static iomux_v3_cfg_t mx53_evk_pads[] = {

index 7678f77..e64a8f7 100644
@@ -32,7 +32,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
-#include "crm_regs.h"
 #include "devices-imx53.h"
 
 #define MX53_LOCO_POWER			IMX_GPIO_NR(1, 8)

index 59c0845..d498573 100644
@@ -31,7 +31,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
-#include "crm_regs.h"
 #include "devices-imx53.h"
 
 #define SMD_FEC_PHY_RST		IMX_GPIO_NR(7, 6)

1.7.7.1

This patch moves the contents of arch/arm/mach-mx5 to arch/arm/mach-imx and adjusts the Makefile/Kconfig entries in a way that it's possible to compile i.MX5 together with i.MX3/6.

---
 arch/arm/Makefile                                  |    1 -
 arch/arm/mach-imx/Kconfig                          |  239 +++++++++++++++++++
 arch/arm/mach-imx/Makefile                         |   21 ++
 arch/arm/{mach-mx5 => mach-imx}/clock-mx51-mx53.c  |    2 +-
 arch/arm/{mach-mx5/cpu.c => mach-imx/cpu-imx5.c}   |    0
 arch/arm/{mach-mx5 => mach-imx}/cpu_op-mx51.c      |    0
 arch/arm/{mach-mx5 => mach-imx}/cpu_op-mx51.h      |    0
 .../crm_regs.h => mach-imx/crm-regs-imx5.h}        |    0
 arch/arm/{mach-mx5 => mach-imx}/devices-imx50.h    |    0
 arch/arm/{mach-mx5 => mach-imx}/devices-imx51.h    |    0
 arch/arm/{mach-mx5 => mach-imx}/devices-imx53.h    |    0
 arch/arm/{mach-mx5 => mach-imx}/efika.h            |    0
 arch/arm/{mach-mx5/ehci.c => mach-imx/ehci-imx5.c} |    0
 .../eukrea_mbimx51-baseboard.c                     |    0
 .../eukrea_mbimxsd-baseboard.c                     |    0
 arch/arm/{mach-mx5 => mach-imx}/imx51-dt.c         |    0
 arch/arm/{mach-mx5 => mach-imx}/imx53-dt.c         |    0
 .../board-cpuimx51.c => mach-imx/mach-cpuimx51.c}  |    0
 .../mach-cpuimx51sd.c}                             |    0
 .../board-mx50_rdp.c => mach-imx/mach-mx50_rdp.c}  |    0
 .../board-mx51_3ds.c => mach-imx/mach-mx51_3ds.c}  |    0
 .../mach-mx51_babbage.c}                           |    0
 .../mach-mx51_efikamx.c}                           |    0
 .../mach-mx51_efikasb.c}                           |    0
 .../board-mx53_ard.c => mach-imx/mach-mx53_ard.c}  |    0
 .../board-mx53_evk.c => mach-imx/mach-mx53_evk.c}  |    0
 .../mach-mx53_loco.c}                              |    0
 .../board-mx53_smd.c => mach-imx/mach-mx53_smd.c}  |    0
 arch/arm/{mach-mx5/mm.c => mach-imx/mm-imx5.c}     |    0
 arch/arm/{mach-mx5 => mach-imx}/mx51_efika.c       |    0
 arch/arm/{mach-mx5/system.c => mach-imx/pm-imx5.c} |   89 +++++++-
 arch/arm/mach-mx5/Kconfig                          |  244 --------------------
 arch/arm/mach-mx5/Makefile                         |   26 --
 arch/arm/mach-mx5/pm-imx5.c                        |   83 -------
 arch/arm/plat-mxc/Kconfig                          |   15 +-
 35 files changed, 344 insertions(+), 376 deletions(-)
 rename arch/arm/{mach-mx5 => mach-imx}/clock-mx51-mx53.c (99%)
 rename arch/arm/{mach-mx5/cpu.c => mach-imx/cpu-imx5.c} (100%)
 rename arch/arm/{mach-mx5 => mach-imx}/cpu_op-mx51.c (100%)
 rename arch/arm/{mach-mx5 => mach-imx}/cpu_op-mx51.h (100%)
 rename arch/arm/{mach-mx5/crm_regs.h => mach-imx/crm-regs-imx5.h} (100%)
 rename arch/arm/{mach-mx5 => mach-imx}/devices-imx50.h (100%)
 rename arch/arm/{mach-mx5 => mach-imx}/devices-imx51.h (100%)
 rename arch/arm/{mach-mx5 => mach-imx}/devices-imx53.h (100%)
 rename arch/arm/{mach-mx5 => mach-imx}/efika.h (100%)
 rename arch/arm/{mach-mx5/ehci.c => mach-imx/ehci-imx5.c} (100%)
 rename arch/arm/{mach-mx5 => mach-imx}/eukrea_mbimx51-baseboard.c (100%)
 rename arch/arm/{mach-mx5 => mach-imx}/eukrea_mbimxsd-baseboard.c (100%)
 rename arch/arm/{mach-mx5 => mach-imx}/imx51-dt.c (100%)
 rename arch/arm/{mach-mx5 => mach-imx}/imx53-dt.c (100%)
 rename arch/arm/{mach-mx5/board-cpuimx51.c => mach-imx/mach-cpuimx51.c} (100%)
 rename arch/arm/{mach-mx5/board-cpuimx51sd.c => mach-imx/mach-cpuimx51sd.c} (100%)
 rename arch/arm/{mach-mx5/board-mx50_rdp.c => mach-imx/mach-mx50_rdp.c} (100%)
 rename arch/arm/{mach-mx5/board-mx51_3ds.c => mach-imx/mach-mx51_3ds.c} (100%)
 rename arch/arm/{mach-mx5/board-mx51_babbage.c => mach-imx/mach-mx51_babbage.c} (100%)
 rename arch/arm/{mach-mx5/board-mx51_efikamx.c => mach-imx/mach-mx51_efikamx.c} (100%)
 rename arch/arm/{mach-mx5/board-mx51_efikasb.c => mach-imx/mach-mx51_efikasb.c} (100%)
 rename arch/arm/{mach-mx5/board-mx53_ard.c => mach-imx/mach-mx53_ard.c} (100%)
 rename arch/arm/{mach-mx5/board-mx53_evk.c => mach-imx/mach-mx53_evk.c} (100%)
 rename arch/arm/{mach-mx5/board-mx53_loco.c => mach-imx/mach-mx53_loco.c} (100%)
 rename arch/arm/{mach-mx5/board-mx53_smd.c => mach-imx/mach-mx53_smd.c} (100%)
 rename arch/arm/{mach-mx5/mm.c => mach-imx/mm-imx5.c} (100%)
 rename arch/arm/{mach-mx5 => mach-imx}/mx51_efika.c (100%)
 rename arch/arm/{mach-mx5/system.c => mach-imx/pm-imx5.c} (58%)
 delete mode 100644 arch/arm/mach-mx5/Kconfig
 delete mode 100644 arch/arm/mach-mx5/Makefile
 delete mode 100644 arch/arm/mach-mx5/pm-imx5.c

index dfcf3b0..cf7d467 100644
@@ -160,7 +160,6 @@ machine-$(CONFIG_ARCH_MSM)		:= msm
 machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0
 machine-$(CONFIG_ARCH_IMX_V4_V5)	:= imx
 machine-$(CONFIG_ARCH_IMX_V6_V7)	:= imx
-machine-$(CONFIG_ARCH_MX5)		:= mx5
 machine-$(CONFIG_ARCH_MXS)		:= mxs
 machine-$(CONFIG_ARCH_NETX)		:= netx
 machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik

index aba7321..9cf630a 100644
@@ -11,6 +11,8 @@ obj-$(CONFIG_SOC_IMX27) += clock-imx27.o mm-imx27.o ehci-imx27.o
 obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o
 obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o
 
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clock-mx51-mx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o
+
 # Support for CMOS sensor interface
 obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
 

@@ -71,3 +73,22 @@ obj-$(CONFIG_SMP) += platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
 obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
 obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o pm-imx6q.o
+
+# i.MX5 based machines
+obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o
+obj-$(CONFIG_MACH_MX51_3DS) += mach-mx51_3ds.o
+obj-$(CONFIG_MACH_MX53_EVK) += mach-mx53_evk.o
+obj-$(CONFIG_MACH_MX53_SMD) += mach-mx53_smd.o
+obj-$(CONFIG_MACH_MX53_LOCO) += mach-mx53_loco.o
+obj-$(CONFIG_MACH_MX53_ARD) += mach-mx53_ard.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += mach-cpuimx51.o
+obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o
+obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o
+obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o
+obj-$(CONFIG_MACH_MX51_EFIKAMX) += mach-mx51_efikamx.o
+obj-$(CONFIG_MACH_MX51_EFIKASB) += mach-mx51_efikasb.o
+obj-$(CONFIG_MACH_MX50_RDP) += mach-mx50_rdp.o
+
+obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
+obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o

similarity index 99%
rename from arch/arm/mach-mx5/clock-mx51-mx53.c
rename to arch/arm/mach-imx/clock-mx51-mx53.c
index 2aacf41..a2c654d 100644
@@ -23,7 +23,7 @@
 #include <mach/common.h>
 #include <mach/clock.h>
 
-#include "crm_regs.h"
+#include "crm-regs-imx5.h"
 
 /* External clock values passed-in by the board code */
 static unsigned long external_high_reference, external_low_reference;

similarity index 100%
rename from arch/arm/mach-mx5/cpu.c
rename to arch/arm/mach-imx/cpu-imx5.c

similarity index 100%
rename from arch/arm/mach-mx5/cpu_op-mx51.c
rename to arch/arm/mach-imx/cpu_op-mx51.c

similarity index 100%
rename from arch/arm/mach-mx5/cpu_op-mx51.h
rename to arch/arm/mach-imx/cpu_op-mx51.h

similarity index 100%
rename from arch/arm/mach-mx5/crm_regs.h
rename to arch/arm/mach-imx/crm-regs-imx5.h

similarity index 100%
rename from arch/arm/mach-mx5/devices-imx50.h
rename to arch/arm/mach-imx/devices-imx50.h

similarity index 100%
rename from arch/arm/mach-mx5/devices-imx51.h
rename to arch/arm/mach-imx/devices-imx51.h

similarity index 100%
rename from arch/arm/mach-mx5/devices-imx53.h
rename to arch/arm/mach-imx/devices-imx53.h

similarity index 100%
rename from arch/arm/mach-mx5/efika.h
rename to arch/arm/mach-imx/efika.h

similarity index 100%
rename from arch/arm/mach-mx5/ehci.c
rename to arch/arm/mach-imx/ehci-imx5.c

similarity index 100%
rename from arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
rename to arch/arm/mach-imx/eukrea_mbimx51-baseboard.c

similarity index 100%
rename from arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
rename to arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c

similarity index 100%
rename from arch/arm/mach-mx5/imx51-dt.c
rename to arch/arm/mach-imx/imx51-dt.c

similarity index 100%
rename from arch/arm/mach-mx5/imx53-dt.c
rename to arch/arm/mach-imx/imx53-dt.c

similarity index 100%
rename from arch/arm/mach-mx5/board-cpuimx51.c
rename to arch/arm/mach-imx/mach-cpuimx51.c

similarity index 100%
rename from arch/arm/mach-mx5/board-cpuimx51sd.c
rename to arch/arm/mach-imx/mach-cpuimx51sd.c

similarity index 100%
rename from arch/arm/mach-mx5/board-mx50_rdp.c
rename to arch/arm/mach-imx/mach-mx50_rdp.c

similarity index 100%
rename from arch/arm/mach-mx5/board-mx51_3ds.c
rename to arch/arm/mach-imx/mach-mx51_3ds.c

similarity index 100%
rename from arch/arm/mach-mx5/board-mx51_babbage.c
rename to arch/arm/mach-imx/mach-mx51_babbage.c

similarity index 100%
rename from arch/arm/mach-mx5/board-mx51_efikamx.c
rename to arch/arm/mach-imx/mach-mx51_efikamx.c

similarity index 100%
rename from arch/arm/mach-mx5/board-mx51_efikasb.c
rename to arch/arm/mach-imx/mach-mx51_efikasb.c

similarity index 100%
rename from arch/arm/mach-mx5/board-mx53_ard.c
rename to arch/arm/mach-imx/mach-mx53_ard.c

similarity index 100%
rename from arch/arm/mach-mx5/board-mx53_evk.c
rename to arch/arm/mach-imx/mach-mx53_evk.c

similarity index 100%
rename from arch/arm/mach-mx5/board-mx53_loco.c
rename to arch/arm/mach-imx/mach-mx53_loco.c

similarity index 100%
rename from arch/arm/mach-mx5/board-mx53_smd.c
rename to arch/arm/mach-imx/mach-mx53_smd.c

similarity index 100%
rename from arch/arm/mach-mx5/mm.c
rename to arch/arm/mach-imx/mm-imx5.c

similarity index 100%
rename from arch/arm/mach-mx5/mx51_efika.c
rename to arch/arm/mach-imx/mx51_efika.c

deleted file mode 100644
index 0fc6080..0000000
@@ -1,26 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-obj-y   := cpu.o mm.o clock-mx51-mx53.o ehci.o system.o
-
-obj-$(CONFIG_PM) += pm-imx5.o
-obj-$(CONFIG_CPU_FREQ_IMX)    += cpu_op-mx51.o
-obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
-obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
-obj-$(CONFIG_MACH_MX53_EVK) += board-mx53_evk.o
-obj-$(CONFIG_MACH_MX53_SMD) += board-mx53_smd.o
-obj-$(CONFIG_MACH_MX53_LOCO) += board-mx53_loco.o
-obj-$(CONFIG_MACH_MX53_ARD) += board-mx53_ard.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o
-obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o
-obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o
-obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o
-obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o
-obj-$(CONFIG_MACH_MX51_EFIKASB) += board-mx51_efikasb.o
-obj-$(CONFIG_MACH_MX50_RDP) += board-mx50_rdp.o
-
-obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
-obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o

index a08a951..fdde4d1 100644
@@ -17,25 +17,16 @@ config ARCH_IMX_V4_V5
 	  and ARMv5 SoCs
 
 config ARCH_IMX_V6_V7
-	bool "i.MX3, i.MX6"
+	bool "i.MX3, i.MX5, i.MX6"
 	select AUTO_ZRELADDR if !ZBOOT_ROM
 	select ARM_PATCH_PHYS_VIRT
 	help
-	  This enables support for systems based on the Freescale i.MX3 and i.MX6
-	  family.
-
-config ARCH_MX5
-	bool "i.MX50, i.MX51, i.MX53"
-	select AUTO_ZRELADDR
-	select ARM_PATCH_PHYS_VIRT
-	help
-	  This enables support for machines using Freescale's i.MX50 and i.MX53
-	  processors.
+	  This enables support for systems based on the Freescale i.MX3, i.MX5
+	  and i.MX6 family.
 
 endchoice
 
 source "arch/arm/mach-imx/Kconfig"
-source "arch/arm/mach-mx5/Kconfig"
 
 endmenu
 

1.7.7.1

Forgot to handle Makefile.boot. Will update.

Sascha

Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

This updates the defconfig for i.MX3, i.MX5 and i.MX6.

- all these can be compiled together now, so remove mx3_defconfig and mx5_defconfig and introduce a imx_v6_v7_defconfig instead.

---
 .../configs/{mx5_defconfig => imx_v6_v7_defconfig} |   60 +++++----
 arch/arm/configs/mx3_defconfig                     |  144 --------------------
 2 files changed, 35 insertions(+), 169 deletions(-)
 rename arch/arm/configs/{mx5_defconfig => imx_v6_v7_defconfig} (80%)
 delete mode 100644 arch/arm/configs/mx3_defconfig

similarity index 80%
rename from arch/arm/configs/mx5_defconfig
rename to arch/arm/configs/imx_v6_v7_defconfig
index d0d8dfe..2fbcaef 100644
@@ -3,6 +3,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_KERNEL_LZO=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=18
+CONFIG_CGROUPS=y
 CONFIG_RELAY=y
 CONFIG_EXPERT=y
 # CONFIG_SLUB_DEBUG is not set

@@ -14,20 +15,31 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MX5=y
-CONFIG_MACH_MX51_BABBAGE=y
+CONFIG_MACH_MX31LILLY=y
+CONFIG_MACH_MX31LITE=y
+CONFIG_MACH_PCM037=y
+CONFIG_MACH_PCM037_EET=y
+CONFIG_MACH_MX31_3DS=y
+CONFIG_MACH_MX31MOBOARD=y
+CONFIG_MACH_QONG=y
+CONFIG_MACH_ARMADILLO5X0=y
+CONFIG_MACH_KZM_ARM11_01=y
+CONFIG_MACH_PCM043=y
+CONFIG_MACH_MX35_3DS=y
+CONFIG_MACH_EUKREA_CPUIMX35=y
+CONFIG_MACH_VPR200=y
+CONFIG_MACH_IMX51_DT=y
 CONFIG_MACH_MX51_3DS=y
 CONFIG_MACH_EUKREA_CPUIMX51=y
 CONFIG_MACH_EUKREA_CPUIMX51SD=y
 CONFIG_MACH_MX51_EFIKAMX=y
 CONFIG_MACH_MX51_EFIKASB=y
-CONFIG_MACH_MX53_EVK=y
-CONFIG_MACH_MX53_SMD=y
-CONFIG_MACH_MX53_LOCO=y
-CONFIG_MACH_MX53_ARD=y
+CONFIG_MACH_IMX53_DT=y
+CONFIG_SOC_IMX6Q=y
 CONFIG_MXC_PWM=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_SMP=y
 CONFIG_VMSPLIT_2G=y
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_AEABI=y

@@ -49,7 +61,7 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
+CONFIG_IPV6=y
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y

@@ -68,24 +80,20 @@ CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_ATA=y
 CONFIG_PATA_IMX=y
 CONFIG_NETDEVICES=y
-CONFIG_MII=m
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_ICPLUS_PHY=y
-CONFIG_REALTEK_PHY=y
-CONFIG_NATIONAL_PHY=y
-CONFIG_STE10XP=y
-CONFIG_LSI_ET1011C_PHY=y
-CONFIG_MICREL_PHY=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+CONFIG_FEC=y
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+CONFIG_SMC91X=y
+CONFIG_SMC911X=y
+CONFIG_SMSC911X=y
+# CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y

@@ -133,6 +141,8 @@ CONFIG_LEDS_CLASS=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
 CONFIG_RTC_MXC=y
+CONFIG_DMADEVICES=y
+CONFIG_IMX_SDMA=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y

1.7.7.1

Hi Sascha,

Can you amend the following change to imx_v6_v7_defconfig? With this change, CONFIG_MMC_BLOCK will become built-in and I can boot the kernel with Linaro rootfs on SD/MMC, which is a pretty nice thing for some people.

Regards,
Shawn

index 2fbcaef..3a4fb2e 100644
@@ -132,7 +132,6 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_MXC=y
 CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
-CONFIG_MMC_BLOCK=m
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_ESDHC_IMX=y

Ok, no problem.

Sascha

Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Nice stuff.

I definitely would like to have it as early as possible.

Regards,
Shawn

Hi,

Very nice consolidation.

Merging during -rc sounds reasonable to me, but I'll leave final decision to Arnd when he's back.

-Olof

Using your mx5-merge branch, on imx6q, imx51 and imx53:

Regards,
Shawn

On imx6q (with Shawn's CONFIG_MMC_BLOCK change):

Thanks

Dirk