M28EVK: Enable USB HOST support

PATCH New Marek Vasut 2 participants 7 messages Nov 12, 2011 – Nov 17, 2011 2 messages not in the archive

lore

Share & tools

lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

Marek Vasut

author

2011-11-12 16:08 UTC #1 lore raw

PATCH 20/20 M28EVK: Enable USB HOST support

Quoted 10 lines

Hi Marek,
u-boot-v2011.09 doesn't support for imx28. I need complete support patch for mx28. where can i get those patches?
for which version of u-boot this patches supports..?
Regards,
Manoj

Can you please learn to Cc mailing list when asking something ?

Here is the latest version:
http://git.denx.de/?p=u-boot/u-boot-imx.git;a=summary

A message that is not in the archive (sent off-list or not yet received): [email protected]

Manojkumar

2011-11-14 07:59 UTC #3 lore raw

PATCH 20/20 M28EVK: Enable USB HOST support

Quoted 8 lines · Marek Vasut

Quoted 8 lines
Hi Marek,
u-boot-v2011.09 doesn't support for imx28. I need complete support patch for mx28. where can i get those patches?
for which version of u-boot this patches supports..?

Quoted 9 lines

Quoted 3 lines
Regards,
Manoj
http://git.denx.de/?p=u-boot/u-boot-imx.git;a=summary
M

Thanks Marek,
Patches applied..
on usb start command i'm getting "scanning bus for devices... New Device 0" then its freezes after getting the debug message "enabling power on all ports
usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length 0x0"
can u help me on this further?

Regards,
Manoj

Marek Vasut

author

2011-11-14 10:48 UTC #4 lore raw

PATCH 20/20 M28EVK: Enable USB HOST support

Quoted 25 lines

Quoted 8 lines · Marek Vasut
Quoted 8 lines
Hi Marek,
u-boot-v2011.09 doesn't support for imx28. I need complete support patch for mx28. where can i get those patches?
for which version of u-boot this patches supports..?
Quoted 6 lines
Quoted 2 lines
Regards,
Manoj
http://git.denx.de/?p=u-boot/u-boot-imx.git;a=summary
M
Thanks Marek,
Patches applied..
on usb start command i'm getting "scanning bus for devices... New Device 0" then its freezes after getting the debug message "enabling power on all ports
usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length 0x0"
can u help me on this further?

Quoted 2 lines

Regards,
Manoj

There is a mail with subject "[U-Boot] [PATCH] GCC4.6: Fix common/usb.c on xscale" in uboot ML ... apply the patch and retry. What GCC do you use?

Manojkumar

2011-11-14 13:17 UTC #5 lore raw

PATCH 20/20 M28EVK: Enable USB HOST support

Quoted 26 lines · Marek Vasut

Quoted 26 lines
Quoted 8 lines · Marek Vasut
Quoted 8 lines
Hi Marek,
u-boot-v2011.09 doesn't support for imx28. I need complete support patch for mx28. where can i get those patches?
for which version of u-boot this patches supports..?
Quoted 7 lines
Quoted 3 lines
Regards,
Manoj
http://git.denx.de/?p=u-boot/u-boot-imx.git;a=summary
M
Thanks Marek,
Patches applied..
on usb start command i'm getting "scanning bus for devices... New Device 0" then its freezes after getting the debug message "enabling power on all ports
usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length 0x0"
can u help me on this further?

Quoted 10 lines

Quoted 3 lines
Regards,
Manoj
There is a mail with subject "[U-Boot] [PATCH] GCC4.6: Fix common/usb.c on xscale" in uboot ML ... apply the patch and retry. What GCC do you use?
M

Hello Marek,

I'm using
u-boot version : u-boot-imx

gcc version:4.3.3

When i try to add this Patch "[U-Boot] [PATCH] GCC4.6: Fix common/usb.c on xscale"
I'm getting:
patching file usb.c
Hunk #1 FAILED at 263.
Hunk #2 FAILED at 313.
2 out of 2 hunks FAILED -- saving rejects to file usb.c.rej

then i made some changes for common/usb.c as per the patch,even it gets freezes after printing the debug msg.
"enabling power on all ports
usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length 0x0"

Regards,
Manoj

Marek Vasut

author

2011-11-14 14:21 UTC #6 lore raw

PATCH 20/20 M28EVK: Enable USB HOST support

Quoted 50 lines

Quoted 25 lines · Marek Vasut
Quoted 25 lines
Quoted 8 lines · Marek Vasut
Quoted 8 lines
Hi Marek,
u-boot-v2011.09 doesn't support for imx28. I need complete support patch for mx28. where can i get those patches?
for which version of u-boot this patches supports..?
Quoted 6 lines
Quoted 2 lines
Regards,
Manoj
http://git.denx.de/?p=u-boot/u-boot-imx.git;a=summary
M
Thanks Marek,
Patches applied..
on usb start command i'm getting "scanning bus for devices... New Device 0" then its freezes after getting the debug message "enabling power on all ports
usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length 0x0"
can u help me on this further?
Quoted 8 lines
Quoted 2 lines
Regards,
Manoj
There is a mail with subject "[U-Boot] [PATCH] GCC4.6: Fix common/usb.c on xscale" in uboot ML ... apply the patch and retry. What GCC do you use?
M
Hello Marek,
I'm using
u-boot version : u-boot-imx
gcc version:4.3.3
When i try to add this Patch "[U-Boot] [PATCH] GCC4.6: Fix common/usb.c on xscale"
I'm getting:
patching file usb.c
Hunk #1 FAILED at 263.
Hunk #2 FAILED at 313.
2 out of 2 hunks FAILED -- saving rejects to file usb.c.rej

Quoted 8 lines

then i made some changes for common/usb.c as per the patch,even it gets freezes after printing the debug msg.
"enabling power on all ports
usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length 0x0"
Regards,
Manoj

Are you using top-of-the-tree u-boot-imx/master? You shouldn't need to apply any patches. That'd explain why you're getting errors applying the last USB patch I suggested.

Also, please try ELDK5.0 toolchain.

Manojkumar

2011-11-17 09:07 UTC #7 lore raw

PATCH 20/20 M28EVK: Enable USB HOST support

Quoted 62 lines · Marek Vasut

Quoted 52 lines
Quoted 26 lines · Marek Vasut
Quoted 26 lines
Quoted 8 lines · Marek Vasut
Quoted 8 lines
Hi Marek,
u-boot-v2011.09 doesn't support for imx28. I need complete support patch for mx28. where can i get those patches?
for which version of u-boot this patches supports..?
Quoted 7 lines
Quoted 3 lines
Regards,
Manoj
http://git.denx.de/?p=u-boot/u-boot-imx.git;a=summary
M
Thanks Marek,
Patches applied..
on usb start command i'm getting "scanning bus for devices... New Device 0" then its freezes after getting the debug message "enabling power on all ports
usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length 0x0"
can u help me on this further?
Quoted 9 lines
Quoted 3 lines
Regards,
Manoj
There is a mail with subject "[U-Boot] [PATCH] GCC4.6: Fix common/usb.c on xscale" in uboot ML ... apply the patch and retry. What GCC do you use?
M
Hello Marek,
I'm using
u-boot version : u-boot-imx
gcc version:4.3.3
When i try to add this Patch "[U-Boot] [PATCH] GCC4.6: Fix common/usb.c on xscale"
I'm getting:
patching file usb.c
Hunk #1 FAILED at 263.
Hunk #2 FAILED at 313.
2 out of 2 hunks FAILED -- saving rejects to file usb.c.rej
Quoted 9 lines
then i made some changes for common/usb.c as per the patch,even it gets freezes after printing the debug msg.
"enabling power on all ports
usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length 0x0"
Regards,
Manoj

Quoted 9 lines

Are you using top-of-the-tree u-boot-imx/master? You shouldn't need to apply any patches. That'd explain why you're getting errors applying the last USB patch I suggested.
Also, please try ELDK5.0 toolchain.
M

Marek,

ya i'm using master code and now its working fine..

Regards,
Manoj

Marek Vasut

author

2011-11-17 18:04 UTC #8 lore raw

PATCH 20/20 M28EVK: Enable USB HOST support

Quoted 64 lines

Quoted 63 lines · Marek Vasut
Quoted 50 lines
Quoted 25 lines · Marek Vasut
Quoted 25 lines
Quoted 8 lines · Marek Vasut
Quoted 8 lines
Hi Marek,
u-boot-v2011.09 doesn't support for imx28. I need complete support patch for mx28. where can i get those patches?
for which version of u-boot this patches supports..?
Quoted 6 lines
Quoted 2 lines
Regards,
Manoj
http://git.denx.de/?p=u-boot/u-boot-imx.git;a=summary
M
Thanks Marek,
Patches applied..
on usb start command i'm getting "scanning bus for devices... New Device 0" then its freezes after getting the debug message "enabling power on all ports
usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length 0x0"
can u help me on this further?
Quoted 8 lines
Quoted 2 lines
Regards,
Manoj
There is a mail with subject "[U-Boot] [PATCH] GCC4.6: Fix common/usb.c on xscale" in uboot ML ... apply the patch and retry. What GCC do you use?
M
Hello Marek,
I'm using
u-boot version : u-boot-imx
gcc version:4.3.3
When i try to add this Patch "[U-Boot] [PATCH] GCC4.6: Fix common/usb.c on xscale"
I'm getting:
patching file usb.c
Hunk #1 FAILED at 263.
Hunk #2 FAILED at 313.
2 out of 2 hunks FAILED -- saving rejects to file usb.c.rej
Quoted 8 lines
then i made some changes for common/usb.c as per the patch,even it gets freezes after printing the debug msg.
"enabling power on all ports
usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length 0x0"
Regards,
Manoj
Are you using top-of-the-tree u-boot-imx/master? You shouldn't need to apply any patches. That'd explain why you're getting errors applying the last USB patch I suggested.

Quoted 7 lines

Quoted 3 lines
Also, please try ELDK5.0 toolchain.
M
Marek,
ya i'm using master code and now its working fine..

Is it because of "[U-Boot] [PATCH] GCC4.6: Fix common/usb.c on xscale" or ELDK5.0 or Using u-boot/master ? What did you change?

Anyway, it's good to hear!!