mx5: Correct a warning in clock.c
PATCH 1/1 mx5: Correct a warning in clock.c
This corects the warning below, obtained with my gcc 4.6 compiler.
arch/arm/cpu/armv7/mx5/libmx5.o: In function `decode_pll':arch/arm/cpu/armv7/mx5/clock.c:94: undefined reference to `__aeabi_uldivmod'
I am not able to test this on MX5x hardware, but it does improve the MAKEALL output for me. You may already have a similar patch, but I cannot see it on the list.
--- arch/arm/cpu/armv7/mx5/clock.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
arch/arm/cpu/armv7/mx5/clock.c +1 -1
@@ -91,7 +91,7 @@ static uint32_t decode_pll(struct mxc_pll_reg *pll, uint32_t infreq)if (ctrl &MXC_DPLLC_CTL_DPDCK0_2_EN ) refclk *=2 ; - refclk /= pdf +1 ; +do_div (refclk, pdf +1 ); temp = refclk * mfn_abs;do_div (temp, mfd +1 ); ret = refclk * mfi;
Signature · 1 line
1.7.3.1
PATCH 1/1 mx5: Correct a warning in clock.c
Quoted 11 lines · Simon Glass
This corects the warning below, obtained with my gcc 4.6 compiler.
arch/arm/cpu/armv7/mx5/libmx5.o: In function `decode_pll':arch/arm/cpu/armv7/mx5/clock.c:94: undefined reference to `__aeabi_uldivmod'I am not able to test this on MX5x hardware, but it does improve the MAKEALL output for me. You may already have a similar patch, but I cannot see it on the list.
Signed-off-by Simon Glass <[email protected]>---
Sorry to check this late, but...
...I have built with gcc 4.6.1, no warning at all:
Configuring for mx53loco - Board: mx53loco, Options:
IMX_CONFIG=board/freescale/mx53loco/imximage.cfg
text data bss dec hex filename
191025 3976 218384 413385 64ec9 ./u-boot
The same for all other MX5 boards - I do not see the issue you reported.
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================
PATCH 1/1 mx5: Correct a warning in clock.c
Quoted 14 lines · On Friday 18 November 2011 12:20:02 Stefano Babic wrote:
Quoted 9 lines · Simon Glass
This corects the warning below, obtained with my gcc 4.6 compiler.
arch/arm/cpu/armv7/mx5/libmx5.o: In function `decode_pll':arch/arm/cpu/armv7/mx5/clock.c:94: undefined reference to `__aeabi_uldivmod'I am not able to test this on MX5x hardware, but it does improve the MAKEALL output for me. You may already have a similar patch, but I cannot see it on the list.
Sorry to check this late, but...
Quoted 8 lines
...I have built with gcc 4.6.1, no warning at all:
Configuring for mx53loco - Board: mx53loco, Options:
IMX_CONFIG=board/freescale/mx53loco/imximage.cfg
text data bss dec hex filename
191025 3976 218384 413385 64ec9 ./u-bootThe same for all other MX5 boards - I do not see the issue you reported.
are you using PRIVATE LIBGCC ?
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20111118/c1475f4b/attachment.pgp>
PATCH 1/1 mx5: Correct a warning in clock.c
Hi Mike,
Quoted 22 lines · Mike Frysinger
Quoted 21 lines · On Friday 18 November 2011 12:20:02 Stefano Babic wrote:
Quoted 9 lines · Simon Glass
This corects the warning below, obtained with my gcc 4.6 compiler.
arch/arm/cpu/armv7/mx5/libmx5.o: In function `decode_pll':arch/arm/cpu/armv7/mx5/clock.c:94: undefined reference to `__aeabi_uldivmod'I am not able to test this on MX5x hardware, but it does improve the MAKEALL output for me. You may already have a similar patch, but I cannot see it on the list.
Sorry to check this late, but...
...I have built with gcc 4.6.1, no warning at all:
Configuring for mx53loco - Board: mx53loco, Options:
IMX_CONFIG=board/freescale/mx53loco/imximage.cfg ? ?text ? ? ? ? ?data ? ? bss ? ? dec ? ? hex filename ?191025 ? ? ? ? ?3976 ?218384 ?413385 ? 64ec9 ./u-boot
Quoted 5 lines
Quoted 1 line
The same for all other MX5 boards - I do not see the issue you reported.
are you using PRIVATE LIBGCC ?
-mike
Yes, perhaps as a side-effect of the buildall script...
Since a recent ARM patch to support widen divide was rejected, I assume that we should use do_div() in these cases?
armv7a-cros-linux-gnueabi-gcc -v && make clobber && makemx53smd_config && make -s -j10 USE_PRIVATE_LIBGCC=y
Using built-in specs. COLLECT_GCC=/usr/x86_64-pc-linux-gnu/armv7a-cros-linux-gnueabi/gcc-bin/4.6.0/armv7a-cros-linux-gnueabi-gcc.real COLLECT_LTO_WRAPPER=/usr/libexec/gcc/armv7a-cros-linux-gnueabi/4.6.x-google/lto-wrapper
Target: armv7a-cros-linux-gnueabi
Configured with:/var/tmp/portage/cross-armv7a-cros-linux-gnueabi/gcc-4.6.0-r7/work/gcc-4.6.0/configure --disable-multilib --prefix=/usr --with-slibdir=/usr/lib/gcc/armv7a-cros-linux-gnueabi/4.6.0/gcc/armv7a-cros-linux-gnueabi/4.6.x-google --libdir=/usr/lib/gcc/armv7a-cros-linux-gnueabi/4.6.0 --bindir=/usr/x86_64-pc-linux-gnu/armv7a-cros-linux-gnueabi/gcc-bin/4.6.0 --includedir=/usr/lib/gcc/armv7a-cros-linux-gnueabi/4.6.0/include --datadir=/usr/share/gcc-data/armv7a-cros-linux-gnueabi/4.6.0 --mandir=/usr/share/gcc-data/armv7a-cros-linux-gnueabi/4.6.0/man --infodir=/usr/share/gcc-data/armv7a-cros-linux-gnueabi/4.6.0/info --enable-version-specific-runtime-libs --with-gxx-include-dir=/usr/lib/gcc/armv7a-cros-linux-gnueabi/4.6.0/include/g++-v4.6.0 --host=x86_64-pc-linux-gnu --target=armv7a-cros-linux-gnueabi
--build=x86_64-pc-linux-gnu --enable-languages=c,c++ --with-mode=thumb --with-sysroot=/usr/armv7a-cros-linux-gnueabi --disable-libmudflap
--disable-libssp --enable-libgomp --enable-__cxa_atexit
--enable-checking=release --disable-libquadmath --with-arch=armv7-a
--disable-esp --with-bugurl=http://code.google.com/p/chromium-os/issues/entry --with-pkgversion=gcc-4.6.0_cos_gg_180104 --enable-linker-build-id
Thread model: posix
gcc version 4.6.x-google 20110718 (prerelease) (gcc-4.6.0_cos_gg_180104)
awk '(NF && $1 !~ /^#/) { print $1 ": " $1 "_config; $(MAKE)" }'
boards.cfg > .boards.depend
Configuring for mx53smd - Board: mx53smd, Options:
IMX_CONFIG=board/freescale/mx53smd/imximage.cfg
Generating include/generated/asm-offsets.h /usr/x86_64-pc-linux-gnu/armv7a-cros-linux-gnueabi/binutils-bin/2.21/ld.bfd.real:
cannot find -lgcc
make: *** [u-boot] Error 1
Regards,
Simon
PATCH 1/1 mx5: Correct a warning in clock.c
Quoted 9 lines · On Sunday 20 November 2011 00:08:05 Simon Glass wrote:
Quoted 8 lines · Mike Frysinger
Quoted 7 lines · On Friday 18 November 2011 12:20:02 Stefano Babic wrote:
Quoted 5 lines · Simon Glass
This corects the warning below, obtained with my gcc 4.6 compiler.
arch/arm/cpu/armv7/mx5/libmx5.o: In function `decode_pll':arch/arm/cpu/armv7/mx5/clock.c:94: undefined reference to `__aeabi_uldivmod'
Quoted 5 lines
Quoted 3 lines
Quoted 1 line
I do not see the issue you reported.
are you using PRIVATE LIBGCC ?
Yes, perhaps as a side-effect of the buildall script...
by design. some arm boards want big endian, some want little. using private allows using of just one gcc.
Quoted 2 lines
Since a recent ARM patch to support widen divide was rejected, I assume that we should use
do_div()in these cases?
yes, as it involves a 64bit in the division.
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20111120/8993ed44/attachment.pgp>
PATCH 1/1 mx5: Correct a warning in clock.c
Hi Mike,
Quoted 16 lines · Mike Frysinger
Quoted 9 lines · On Sunday 20 November 2011 00:08:05 Simon Glass wrote:
Quoted 8 lines · Mike Frysinger
Quoted 7 lines · On Friday 18 November 2011 12:20:02 Stefano Babic wrote:
Quoted 5 lines · Simon Glass
This corects the warning below, obtained with my gcc 4.6 compiler.
arch/arm/cpu/armv7/mx5/libmx5.o: In function `decode_pll':arch/arm/cpu/armv7/mx5/clock.c:94: undefined reference to `__aeabi_uldivmod'Quoted 5 lines
Quoted 3 lines
Quoted 1 line
I do not see the issue you reported.
are you using PRIVATE LIBGCC ?
Yes, perhaps as a side-effect of the buildall script...
Quoted 9 lines
by design. ?some arm boards want big endian, some want little. ?using private allows using of just one gcc.
Quoted 2 lines
Since a recent ARM patch to support widen divide was rejected, I assume that we should use
do_div()in these cases?yes, as it involves a 64bit in the division.
-mike
OK, I have no problem with it, but this problem may not show up for people using vanilla MAKEALL, hence Stefano's email.
Regards,
Simon
PATCH 1/1 mx5: Correct a warning in clock.c
Quoted 2 lines · Simon Glass
OK, I have no problem with it, but this problem may not show up for people using vanilla MAKEALL, hence Stefano's email.
Right - I was asking myself why I could not see the warning, now it is clear to me.
Tested on mx51evk.
Best regards,
Stefano
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================