Skip to contentSkip to conversation

Add scan demux unit and use it in max1363

PATCH Superseded Jonathan Cameron 3 participants 8 messages Dec 4, 2011 – Dec 5, 2011 1 message not in the archive

Subsystems (3)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Jonathan Cameron

author maintainer
#0 lore raw

v2 cover Add scan demux unit and use it in max1363

Hi All,

New version of this series. Two changes as per Lars-Peter's suggestions. ALIGN macro usage in patch 4 and one of the two for each bit set suggestions. The second is subtly different as it is finding bits after a certain point rather than from the start.

As explained in patch 5 discussion, I personally feel that the demux should occur prior to the buffer and avoiding the extra copy should be done by allowing buffers to provide callbacks for reserving (plus getting access to) space and
notifying that they are done filling it. Either way, now
is not the time to do this change. Too much else going on!

Jonathan

Jonathan Cameron (7):
staging:iio:find iio channel from scan index util function staging:iio:buffer add a cache of the timestamp scan index. staging:iio: add hook to allow core to perform scan related config. staging:iio: make iio_sw_buffer_preenable much more general. staging:iio: add demux optionally to path from device to buffer staging:iio:adc:max1363 use new demuxing support. staging:iio:adc:max1363 correctly set channels as big endian.

 drivers/staging/iio/adc/max1363.h         |   11 ++-
 drivers/staging/iio/adc/max1363_core.c    |   18 ++-
 drivers/staging/iio/adc/max1363_ring.c    |   51 ++-----
 drivers/staging/iio/buffer.h              |   16 ++
 drivers/staging/iio/iio.h                 |   13 ++-
 drivers/staging/iio/industrialio-buffer.c |  213 +++++++++++++++++++++++++----
 drivers/staging/iio/industrialio-core.c   |   11 ++
 7 files changed, 260 insertions(+), 73 deletions(-)
Signature · 1 line
1.7.7.4
author maintainer
#1 lore raw

PATCH v2 2/7 staging:iio:buffer add a cache of the timestamp scan index.

From: Jonathan Cameron <[email protected]>

Basically avoids looking it up lots of times.

---
 drivers/staging/iio/buffer.h              |    1 +
 drivers/staging/iio/industrialio-buffer.c |    3 +++
 2 files changed, 4 insertions(+), 0 deletions(-)
drivers/staging/iio/buffer.h +1 -0
index 9de581e..4b8f619 100644
@@ -106,6 +106,7 @@ struct iio_buffer {
 	int					scan_count;
 	long					*scan_mask;
 	bool					scan_timestamp;
+	unsigned				scan_index_timestamp;
 	const struct iio_buffer_access_funcs	*access;
 	const struct iio_buffer_setup_ops		*setup_ops;
 	struct list_head			scan_el_dev_attr_list;
drivers/staging/iio/industrialio-buffer.c +3 -0
index 8c55980..b2cf3e3 100644
@@ -313,6 +313,9 @@ int iio_buffer_register(struct iio_dev *indio_dev,
 			if (ret < 0)
 				goto error_cleanup_dynamic;
 			attrcount += ret;
+			if (channels[i].type == IIO_TIMESTAMP)
+				buffer->scan_index_timestamp =
+					channels[i].scan_index;
 		}
 		if (indio_dev->masklength && buffer->scan_mask == NULL) {
 			buffer->scan_mask = kcalloc(BITS_TO_LONGS(indio_dev->masklength),
Signature · 1 line
1.7.7.4
author maintainer
#2 lore raw

PATCH v2 3/7 staging:iio: add hook to allow core to perform scan related config.

In reply to Jonathan Cameron
---
 drivers/staging/iio/iio.h |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)
drivers/staging/iio/iio.h +2 -1
index 95d6318..4fb8f2f 100644
@@ -262,7 +262,8 @@ struct iio_info {
 				 int val);
 	int (*validate_trigger)(struct iio_dev *indio_dev,
 				struct iio_trigger *trig);
-
+	int (*update_scan_mode)(struct iio_dev *indio_dev,
+				const unsigned long *scan_mask);
 };
 
 /**
Signature · 1 line
1.7.7.4
author maintainer
#3 lore raw

PATCH v2 4/7 staging:iio: make iio_sw_buffer_preenable much more general.

In reply to Jonathan Cameron

Also introduces active_scan_mask storage to tell the core what is really being currently captured from the device (different from what is desired as often has bonus channels).

---
 drivers/staging/iio/iio.h                 |    2 +
 drivers/staging/iio/industrialio-buffer.c |   64 +++++++++++++++++------------
 2 files changed, 40 insertions(+), 26 deletions(-)
drivers/staging/iio/iio.h +2 -0
index 4fb8f2f..c225542 100644
@@ -280,6 +280,7 @@ struct iio_info {
  * @available_scan_masks: [DRIVER] optional array of allowed bitmasks
  * @masklength:		[INTERN] the length of the mask established from
  *			channels
+ * @active_scan_mask:	[INTERN] union of all scan masks requested by buffers
  * @trig:		[INTERN] current device trigger (buffer modes)
  * @pollfunc:		[DRIVER] function run on trigger being received
  * @channels:		[DRIVER] channel specification structure table
@@ -307,6 +308,7 @@ struct iio_dev {
 
 	unsigned long			*available_scan_masks;
 	unsigned			masklength;
+	unsigned long			*active_scan_mask;
 	struct iio_trigger		*trig;
 	struct iio_poll_func		*pollfunc;
 
drivers/staging/iio/industrialio-buffer.c +38 -26

76 lines not on this page · raw message

Signature · 1 line
1.7.7.4
#4 lore raw

Re: [PATCH 4/7] staging:iio: make iio_sw_buffer_preenable much more general.

Quoted 5 lines · Jonathan Cameron

Also introduces active_scan_mask storage to tell the core what is really being currently captured from the device (different from what is desired as often has bonus channels).

One minor comment inline though.

Quoted 79 lines
---
 drivers/staging/iio/iio.h                 |    2 +
 drivers/staging/iio/industrialio-buffer.c |   64 +++++++++++++++++------------
 2 files changed, 40 insertions(+), 26 deletions(-)
drivers/staging/iio/iio.h +2 -0
index 4fb8f2f..c225542 100644
@@ -280,6 +280,7 @@ struct iio_info {
  * @available_scan_masks: [DRIVER] optional array of allowed bitmasks
  * @masklength:		[INTERN] the length of the mask established from
  *			channels
+ * @active_scan_mask:	[INTERN] union of all scan masks requested by buffers
  * @trig:		[INTERN] current device trigger (buffer modes)
  * @pollfunc:		[DRIVER] function run on trigger being received
  * @channels:		[DRIVER] channel specification structure table
@@ -307,6 +308,7 @@ struct iio_dev {
 
 	unsigned long			*available_scan_masks;
 	unsigned			masklength;
+	unsigned long			*active_scan_mask;
 	struct iio_trigger		*trig;
 	struct iio_poll_func		*pollfunc;
 
drivers/staging/iio/industrialio-buffer.c +13 -26
index b2cf3e3..7dedeca 100644
@@ -531,32 +531,6 @@ ssize_t iio_buffer_show_enable(struct device *dev,
 }
 EXPORT_SYMBOL(iio_buffer_show_enable);
 
-int iio_sw_buffer_preenable(struct iio_dev *indio_dev)
-{
-	struct iio_buffer *buffer = indio_dev->buffer;
-	size_t size;
-	dev_dbg(&indio_dev->dev, "%s\n", __func__);
-	/* Check if there are any scan elements enabled, if not fail*/
-	if (!(buffer->scan_count || buffer->scan_timestamp))
-		return -EINVAL;
-	if (buffer->scan_timestamp)
-		if (buffer->scan_count)
-			/* Timestamp (aligned to s64) and data */
-			size = (((buffer->scan_count * buffer->bpe)
-					+ sizeof(s64) - 1)
-				& ~(sizeof(s64) - 1))
-				+ sizeof(s64);
-		else /* Timestamp only  */
-			size = sizeof(s64);
-	else /* Data only */
-		size = buffer->scan_count * buffer->bpe;
-	buffer->access->set_bytes_per_datum(buffer, size);
-
-	return 0;
-}
-EXPORT_SYMBOL(iio_sw_buffer_preenable);
-
-
 /* note NULL used as error indicator as it doesn't make sense. */
 static unsigned long *iio_scan_mask_match(unsigned long *av_masks,
 					  unsigned int masklength,
@@ -572,6 +546,44 @@ static unsigned long *iio_scan_mask_match(unsigned long *av_masks,
 	return NULL;
 }
 
+int iio_sw_buffer_preenable(struct iio_dev *indio_dev)
+{
+	struct iio_buffer *buffer = indio_dev->buffer;
+	const struct iio_chan_spec *ch;
+	unsigned bytes = 0;
+	int length, i;
+	dev_dbg(&indio_dev->dev, "%s\n", __func__);
+
+	/* How much space will the demuxed element take? */
+	for_each_set_bit(i, buffer->scan_mask,
+			 indio_dev->masklength) {
+		ch = iio_find_channel_from_si(indio_dev, i);
+		length = ch->scan_type.storagebits/8;

drivers/staging/iio/industrialio-buffer.c static unsigned long *iio_scan_mask_match(unsigned long *av_masks, · line 571

Quoted 10 lines
drivers/staging/iio/industrialio-buffer.c +10 -0
+		bytes = ALIGN(bytes, length);
+		bytes += length;
+	}
+	if (buffer->scan_timestamp) {
+		ch = iio_find_channel_from_si(indio_dev,
+					      buffer->scan_index_timestamp);
+		length = ch->scan_type.storagebits/8;
+		if (bytes % length)
+			bytes += length - bytes % length;
+		bytes += length;

Could use ALIGN as-well. Btw. ALIGN only works on powers of two. Do we expect other storage sizes? If yes we should probably use roundup() instead.

Quoted 18 lines
drivers/staging/iio/industrialio-buffer.c +15 -0
+	}
+	buffer->access->set_bytes_per_datum(buffer, bytes);
+
+	/* What scan mask do we actually have ?*/
+	if (indio_dev->available_scan_masks)
+		indio_dev->active_scan_mask =
+			iio_scan_mask_match(indio_dev->available_scan_masks,
+					    indio_dev->masklength,
+					    buffer->scan_mask);
+	else
+		indio_dev->active_scan_mask = buffer->scan_mask;
+	return 0;
+}
+EXPORT_SYMBOL(iio_sw_buffer_preenable);
+
 /**
  * iio_scan_mask_set() - set particular bit in the scan mask
  * @buffer: the buffer whose scan mask we are interested in
#5 lore raw

Re: [PATCH 4/7] staging:iio: make iio_sw_buffer_preenable much more general.

Quoted 102 lines · Lars-Peter Clausen
Quoted 5 lines · Jonathan Cameron

Also introduces active_scan_mask storage to tell the core what is really being currently captured from the device (different from what is desired as often has bonus channels).

One minor comment inline though.

Quoted 3 lines
---
 drivers/staging/iio/iio.h                 |    2 +
 drivers/staging/iio/industrialio-buffer.c |   64

+++++++++++++++++------------

drivers/staging/iio/iio.h struct iio_info { · line 280

Quoted 8 lines
 2 files changed, 40 insertions(+), 26 deletions(-)
drivers/staging/iio/iio.h +0 -0
index 4fb8f2f..c225542 100644
@@ -280,6 +280,7 @@ struct iio_info {
  * @available_scan_masks: [DRIVER] optional array of allowed

bitmasks

drivers/staging/iio/iio.h struct iio_info {

Quoted 3 lines
drivers/staging/iio/iio.h +1 -0
  * @masklength:		[INTERN] the length of the mask established from
  *			channels
+ * @active_scan_mask:	[INTERN] union of all scan masks requested by

buffers

Review

Quoted 12 lines
drivers/staging/iio/iio.h +1 -0
  * @trig:		[INTERN] current device trigger (buffer modes)
  * @pollfunc:		[DRIVER] function run on trigger being received
  * @channels:		[DRIVER] channel specification structure table
@@ -307,6 +308,7 @@ struct iio_dev {
 
 	unsigned long			*available_scan_masks;
 	unsigned			masklength;
+	unsigned long			*active_scan_mask;
 	struct iio_trigger		*trig;
 	struct iio_poll_func		*pollfunc;
 
(quoted diff) +0 -0

b/drivers/staging/iio/industrialio-buffer.c

drivers/staging/iio/industrialio-buffer.c ssize_t iio_buffer_show_enable(struct device

Quoted 4 lines

index b2cf3e3..7dedeca 100644

drivers/staging/iio/industrialio-buffer.c +0 -0
@@ -531,32 +531,6 @@ ssize_t iio_buffer_show_enable(struct device

*dev,

drivers/staging/iio/industrialio-buffer.c static unsigned long

Quoted 33 lines
drivers/staging/iio/industrialio-buffer.c +0 -26
 }
 EXPORT_SYMBOL(iio_buffer_show_enable);
 
-int iio_sw_buffer_preenable(struct iio_dev *indio_dev)
-{
-	struct iio_buffer *buffer = indio_dev->buffer;
-	size_t size;
-	dev_dbg(&indio_dev->dev, "%s\n", __func__);
-	/* Check if there are any scan elements enabled, if not fail*/
-	if (!(buffer->scan_count || buffer->scan_timestamp))
-		return -EINVAL;
-	if (buffer->scan_timestamp)
-		if (buffer->scan_count)
-			/* Timestamp (aligned to s64) and data */
-			size = (((buffer->scan_count * buffer->bpe)
-					+ sizeof(s64) - 1)
-				& ~(sizeof(s64) - 1))
-				+ sizeof(s64);
-		else /* Timestamp only  */
-			size = sizeof(s64);
-	else /* Data only */
-		size = buffer->scan_count * buffer->bpe;
-	buffer->access->set_bytes_per_datum(buffer, size);
-
-	return 0;
-}
-EXPORT_SYMBOL(iio_sw_buffer_preenable);
-
-
 /* note NULL used as error indicator as it doesn't make sense. */
 static unsigned long *iio_scan_mask_match(unsigned long *av_masks,
 					  unsigned int masklength,
@@ -572,6 +546,44 @@ static unsigned long

*iio_scan_mask_match(unsigned long *av_masks,

Quoted 22 lines
drivers/staging/iio/industrialio-buffer.c +19 -0
 	return NULL;
 }
 
+int iio_sw_buffer_preenable(struct iio_dev *indio_dev)
+{
+	struct iio_buffer *buffer = indio_dev->buffer;
+	const struct iio_chan_spec *ch;
+	unsigned bytes = 0;
+	int length, i;
+	dev_dbg(&indio_dev->dev, "%s\n", __func__);
+
+	/* How much space will the demuxed element take? */
+	for_each_set_bit(i, buffer->scan_mask,
+			 indio_dev->masklength) {
+		ch = iio_find_channel_from_si(indio_dev, i);
+		length = ch->scan_type.storagebits/8;
+		bytes = ALIGN(bytes, length);
+		bytes += length;
+	}
+	if (buffer->scan_timestamp) {
+		ch = iio_find_channel_from_si(indio_dev,
+					      buffer->scan_index_timestamp);
Quoted 9 lines

drivers/staging/iio/industrialio-buffer.c static unsigned long *iio_scan_mask_match(unsigned long *av_masks, · line 571

Quoted 4 lines
drivers/staging/iio/industrialio-buffer.c +4 -0
+		length = ch->scan_type.storagebits/8;
+		if (bytes % length)
+			bytes += length - bytes % length;
+		bytes += length;

Could use ALIGN as-well. Btw. ALIGN only works on powers of two. Do we expect other storage sizes? If yes we should probably use roundup() instead.

Probably only powers of 2. We can change if /when it becomes necessary.

Quoted 18 lines
Quoted 18 lines
drivers/staging/iio/industrialio-buffer.c +15 -0
+	}
+	buffer->access->set_bytes_per_datum(buffer, bytes);
+
+	/* What scan mask do we actually have ?*/
+	if (indio_dev->available_scan_masks)
+		indio_dev->active_scan_mask =
+			iio_scan_mask_match(indio_dev->available_scan_masks,
+					    indio_dev->masklength,
+					    buffer->scan_mask);
+	else
+		indio_dev->active_scan_mask = buffer->scan_mask;
+	return 0;
+}
+EXPORT_SYMBOL(iio_sw_buffer_preenable);
+
 /**
  * iio_scan_mask_set() - set particular bit in the scan mask
  * @buffer: the buffer whose scan mask we are interested in
Signature · 2 lines
Sent from my Android phone 
with K-9 Mail. Please excuse my brevity.
author maintainer
#6 lore raw

PATCH v2 7/7 staging:iio:adc:max1363 correctly set channels as big endian.

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

Also, the differential channels should always have been signed.

---
 drivers/staging/iio/adc/max1363_core.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)
drivers/staging/iio/adc/max1363_core.c +12 -2
index 7e078fc..9febd1b 100644
@@ -298,7 +298,12 @@ static const enum max1363_modes max1363_mode_list[] = {
 		.channel = num,						\
 		.address = addr,					\
 		.info_mask = MAX1363_INFO_MASK,				\
-		.scan_type = IIO_ST('u', bits, (bits > 8) ? 16 : 8, 0), \
+		.scan_type = {						\
+			.sign = 'u',					\
+			.realbits = bits,				\
+			.storagebits = (bits > 8) ? 16 : 8,		\
+			.endianness = IIO_BE,				\
+		},							\
 		.scan_index = si,					\
 		.event_mask = evmask,					\
 	}
@@ -313,7 +318,12 @@ static const enum max1363_modes max1363_mode_list[] = {
 		.channel2 = num2,					\
 		.address = addr,					\
 		.info_mask = MAX1363_INFO_MASK,				\
-		.scan_type = IIO_ST('u', bits, (bits > 8) ? 16 : 8, 0), \
+		.scan_type = {						\
+			.sign = 's',					\
+			.realbits = bits,				\
+			.storagebits = (bits > 8) ? 16 : 8,		\
+			.endianness = IIO_BE,				\
+		},							\
 		.scan_index = si,					\
 		.event_mask = evmask,					\
 	}
Signature · 1 line
1.7.7.4

A message that is not in the archive (sent off-list or not yet received): [email protected]

#8 lore raw

Re: [PATCH 5/7] staging:iio: add demux optionally to path from device to buffer

Quoted 10 lines · Jonathan Cameron

From: Jonathan Cameron <[email protected]>

This gives you only what you ask for which is handy for some devices with weird scan combinations.

Routes all data flow through a core utility function. That and this demuxing support will be needed to do demuxing to multiple destinations in kernel.

Quoted 220 lines
---
 drivers/staging/iio/buffer.h              |   15 +++
 drivers/staging/iio/industrialio-buffer.c |  146 ++++++++++++++++++++++++++++-
 2 files changed, 157 insertions(+), 4 deletions(-)
drivers/staging/iio/buffer.h +15 -0
index 4b8f619..5282441 100644
@@ -95,6 +95,8 @@ struct iio_buffer_setup_ops {
  * @access:		[DRIVER] buffer access functions associated with the
  *			implementation.
  * @flags:		[INTERN] file ops related flags including busy flag.
+ * @demux_list:		[INTERN] list of operations required to demux the scan.
+ * @demux_bounce:	[INTERN] buffer for doing gather from incoming scan.
  **/
 struct iio_buffer {
 	struct iio_dev				*indio_dev;
@@ -115,6 +117,8 @@ struct iio_buffer {
 	bool					stufftoread;
 	unsigned long				flags;
 	const struct attribute_group *attrs;
+	struct list_head			demux_list;
+	unsigned char				*demux_bounce;
 };
 
 /**
@@ -153,6 +157,17 @@ int iio_scan_mask_set(struct iio_buffer *buffer, int bit);
 	container_of(d, struct iio_buffer, dev)
 
 /**
+ * iio_push_to_buffer() - push to a registered buffer.
+ * @buffer:		IIO buffer structure for device
+ * @scan:		Full scan.
+ * @timestamp:
+ */
+int iio_push_to_buffer(struct iio_buffer *buffer, unsigned char *data,
+		       s64 timestamp);
+
+int iio_update_demux(struct iio_dev *indio_dev);
+
+/**
  * iio_buffer_register() - register the buffer with IIO core
  * @indio_dev: device with the buffer to be registered
  **/
drivers/staging/iio/industrialio-buffer.c +142 -4
index 7dedeca..20b61a1 100644
@@ -87,6 +87,7 @@ void iio_chrdev_buffer_release(struct iio_dev *indio_dev)
 
 void iio_buffer_init(struct iio_buffer *buffer, struct iio_dev *indio_dev)
 {
+	INIT_LIST_HEAD(&buffer->demux_list);
 	buffer->indio_dev = indio_dev;
 	init_waitqueue_head(&buffer->pollq);
 }
@@ -128,10 +129,9 @@ static ssize_t iio_scan_el_show(struct device *dev,
 	int ret;
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 
-	ret = iio_scan_mask_query(indio_dev->buffer,
-				  to_iio_dev_attr(attr)->address);
-	if (ret < 0)
-		return ret;
+	ret = test_bit(to_iio_dev_attr(attr)->address,
+		       indio_dev->buffer->scan_mask);
+
 	return sprintf(buf, "%d\n", ret);
 }
 
@@ -580,6 +580,12 @@ int iio_sw_buffer_preenable(struct iio_dev *indio_dev)
 					    buffer->scan_mask);
 	else
 		indio_dev->active_scan_mask = buffer->scan_mask;
+	iio_update_demux(indio_dev);
+
+	if (indio_dev->info->update_scan_mode)
+		return indio_dev->info
+			->update_scan_mode(indio_dev,
+					   indio_dev->active_scan_mask);
 	return 0;
 }
 EXPORT_SYMBOL(iio_sw_buffer_preenable);
@@ -649,3 +655,135 @@ int iio_scan_mask_query(struct iio_buffer *buffer, int bit)
 	return test_bit(bit, mask);
 };
 EXPORT_SYMBOL_GPL(iio_scan_mask_query);
+
+/**
+ * struct iio_demux_table() - table describing demux memcpy ops
+ * @from:	index to copy from
+ * @to:	index to copy to
+ * @length:	how many bytes to copy
+ * @l:		list head used for management
+ */
+struct iio_demux_table {
+	unsigned from;
+	unsigned to;
+	unsigned length;
+	struct list_head l;
+};
+
+static unsigned char *iio_demux(struct iio_buffer *buffer,
+				 unsigned char *datain)
+{
+	struct iio_demux_table *t;
+
+	if (list_empty(&buffer->demux_list))
+		return datain;
+	list_for_each_entry(t, &buffer->demux_list, l)
+		memcpy(buffer->demux_bounce + t->to,
+		       datain + t->from, t->length);
+
+	return buffer->demux_bounce;
+}
+
+int iio_push_to_buffer(struct iio_buffer *buffer, unsigned char *data,
+		       s64 timestamp)
+{
+	unsigned char *dataout = iio_demux(buffer, data);
+
+	return buffer->access->store_to(buffer, dataout, timestamp);
+}
+EXPORT_SYMBOL_GPL(iio_push_to_buffer);
+
+int iio_update_demux(struct iio_dev *indio_dev)
+{
+	const struct iio_chan_spec *ch;
+	struct iio_buffer *buffer = indio_dev->buffer;
+	int ret, in_ind = -1, out_ind, length;
+	unsigned in_loc = 0, out_loc = 0;
+	struct iio_demux_table *p, *q;
+
+	/* Clear out any old demux */
+	list_for_each_entry_safe(p, q, &buffer->demux_list, l) {
+		list_del(&p->l);
+		kfree(p);
+	}
+	kfree(buffer->demux_bounce);
+	buffer->demux_bounce = NULL;
+
+	/* First work out which scan mode we will actually have */
+	if (bitmap_equal(indio_dev->active_scan_mask,
+			 buffer->scan_mask,
+			 indio_dev->masklength))
+		return 0;
+
+	/* Now we have the two masks, work from least sig and build up sizes */
+	for_each_set_bit(out_ind,
+			 indio_dev->active_scan_mask,
+			 indio_dev->masklength) {
+		in_ind = find_next_bit(indio_dev->active_scan_mask,
+				       indio_dev->masklength,
+				       in_ind + 1);
+		while (in_ind != out_ind) {
+			in_ind = find_next_bit(indio_dev->active_scan_mask,
+					       indio_dev->masklength,
+					       in_ind + 1);
+			ch = iio_find_channel_from_si(indio_dev, in_ind);
+			length = ch->scan_type.storagebits/8;
+			/* Make sure we are aligned */
+			in_loc += length;
+			if (in_loc % length)
+				in_loc += length - in_loc % length;
+		}
+		p = kmalloc(sizeof(*p), GFP_KERNEL);
+		if (p == NULL) {
+			ret = -ENOMEM;
+			goto error_clear_mux_table;
+		}
+		ch = iio_find_channel_from_si(indio_dev, in_ind);
+		length = ch->scan_type.storagebits/8;
+		if (out_loc % length)
+			out_loc += length - out_loc % length;
+		if (in_loc % length)
+			in_loc += length - in_loc % length;
+		p->from = in_loc;
+		p->to = out_loc;
+		p->length = length;
+		list_add_tail(&p->l, &buffer->demux_list);
+		out_loc += length;
+		in_loc += length;
+	}
+	/* Relies on scan_timestamp being last */
+	if (buffer->scan_timestamp) {
+		p = kmalloc(sizeof(*p), GFP_KERNEL);
+		if (p == NULL) {
+			ret = -ENOMEM;
+			goto error_clear_mux_table;
+		}
+		ch = iio_find_channel_from_si(indio_dev,
+			buffer->scan_index_timestamp);
+		length = ch->scan_type.storagebits/8;
+		if (out_loc % length)
+			out_loc += length - out_loc % length;
+		if (in_loc % length)
+			in_loc += length - in_loc % length;
+		p->from = in_loc;
+		p->to = out_loc;
+		p->length = length;
+		list_add_tail(&p->l, &buffer->demux_list);
+		out_loc += length;
+		in_loc += length;
+	}
+	buffer->demux_bounce = kzalloc(out_loc, GFP_KERNEL);
+	if (buffer->demux_bounce == NULL) {
+		ret = -ENOMEM;
+		goto error_clear_mux_table;
+	}
+	return 0;
+
+error_clear_mux_table:
+	list_for_each_entry_safe(p, q, &buffer->demux_list, l) {
+		list_del(&p->l);
+		kfree(p);
+	}
+	return ret;
+}
+EXPORT_SYMBOL_GPL(iio_update_demux);