Can't build glib-2.0
OE Build Configuration:
BB_VERSION = "1.15.0" TARGET_ARCH = "arm" TARGET_OS = "linux-gnueabi" MACHINE = "cobra3530p60" DISTRO = "amltd" DISTRO_VERSION = "1.1+snapshot-20111205" TUNE_FEATURES = "armv7a vfp neon cortexa8" TARGET_FPU = "vfp-neon"
meta
meta-yocto = "master:e5b9ac3b71b6c16fb9a629f12e4d83103db2d5b0"
...
NOTE: package glib-2.0-1_2.30.1-r0: task do_install: Started
ERROR: Function 'do_install' failed (see /home/local/p60_poky/tmp/work/armv7a-vfp-neon-amltd-linux-gnueabi/glib-2.0-1_2.30.1-r0/temp/log.do_install.8610 for further information)
ERROR: Logfile of failure stored in: /home/local/p60_poky/tmp/work/armv7a-vfp-neon-amltd-linux-gnueabi/glib-2.0-1_2.30.1-r0/temp/log.do_install.8610 Log data follows:
| DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common', 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', 'common'] | ERROR: Function 'do_install' failed (see /home/local/p60_poky/tmp/work/armv7a-vfp-neon-amltd-linux-gnueabi/glib-2.0-1_2.30.1-r0/temp/log.do_install.8610 for further information) | /home/local/p60_poky/tmp/work/armv7a-vfp-neon-amltd-linux-gnueabi/glib-2.0-1_2.30.1-r0/temp/run.do_install.8610: line 96: oe_runmake: command not found
NOTE: package glib-2.0-1_2.30.1-r0: task do_install: Failed
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
Quoted 8 lines · Gary Thomas
NOTE: package glib-2.0-1_2.30.1-r0: task
do_install: Started
ERROR: Function 'do_install' failed (see/home/local/p60_poky/tmp/work/armv7a-vfp-neon-amltd-linux-gnueabi/glib-2.0-1_2.30.1-r0/temp/log.do_install.8610for further information)
ERROR: Logfile of failure stored in:/home/local/p60_poky/tmp/work/armv7a-vfp-neon-amltd-linux-gnueabi/glib-2.0-1_2.30.1-r0/temp/log.do_install.8610Log data follows:
| DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common',
Quoted 8 lines
'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', 'common']
| ERROR: Function 'do_install' failed (see/home/local/p60_poky/tmp/work/armv7a-vfp-neon-amltd-linux-gnueabi/glib-2.0-1_2.30.1-r0/temp/log.do_install.8610for further information)
|/home/local/p60_poky/tmp/work/armv7a-vfp-neon-amltd-linux-gnueabi/glib-2.0-1_2.30.1-r0/temp/run.do_install.8610:
line 96:oe_runmake: command not found
NOTE: package glib-2.0-1_2.30.1-r0: taskdo_install: Failed
What's on line 96?
-M
Quoted 18 lines · On 2011-12-05 10:18, McClintock Matthew-B29882 wrote:
Quoted 8 lines · Gary Thomas
NOTE: package glib-2.0-1_2.30.1-r0: task
do_install: Started
ERROR: Function 'do_install' failed (see/home/local/p60_poky/tmp/work/armv7a-vfp-neon-amltd-linux-gnueabi/glib-2.0-1_2.30.1-r0/temp/log.do_install.8610for further information)
ERROR: Logfile of failure stored in:/home/local/p60_poky/tmp/work/armv7a-vfp-neon-amltd-linux-gnueabi/glib-2.0-1_2.30.1-r0/temp/log.do_install.8610Log data follows:
| DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common',Quoted 8 lines
'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', 'common']
| ERROR: Function 'do_install' failed (see/home/local/p60_poky/tmp/work/armv7a-vfp-neon-amltd-linux-gnueabi/glib-2.0-1_2.30.1-r0/temp/log.do_install.8610for further information)
|/home/local/p60_poky/tmp/work/armv7a-vfp-neon-amltd-linux-gnueabi/glib-2.0-1_2.30.1-r0/temp/run.do_install.8610:
line 96:oe_runmake: command not found
NOTE: package glib-2.0-1_2.30.1-r0: taskdo_install: Failed
Quoted 1 line
What's on line 96?
The normal 'autotools_do_install' boilerplate:
autotools_do_install() {
oe_runmake 'DESTDIR=/home/local/p60_poky/tmp/work/armv7a-vfp-neon-amltd-linux-gnueabi/glib-2.0-1_2.30.1-r0/image' install
# Info dir listing isn't interesting at this point so remove it if it exists.
if [ -e "/home/local/p60_poky/tmp/work/armv7a-vfp-neon-amltd-linux-gnueabi/glib-2.0-1_2.30.1-r0/image/usr/share/info/dir" ]; then
rm -f /home/local/p60_poky/tmp/work/armv7a-vfp-neon-amltd-linux-gnueabi/glib-2.0-1_2.30.1-r0/image/usr/share/info/dir
fi}
What's missing is the functions which should be coming from base.bbclass. I looked at an older build of glib-2.0 and these functions are missing:
==============================================================
oe_runmake() {
if [ x"$MAKE" = x ]; then MAKE=make; fi
bbnote make -j 4 "$@"
make -j 4 "$@" || die "oe_runmake failed"}
die() {
bbfatal "$*"}
bbnote() {
echo "NOTE: $*"}
bbfatal() {
echo "ERROR: $*"
exit 1}
==============================================================
Why would they be missing from this run.do_install script?
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
Quoted 20 lines · Gary Thomas
What's missing is the functions which should be coming from base.bbclass. I looked at an older build of glib-2.0 and these functions are missing:
==============================================================oe_runmake(){
if [ x"$MAKE" = x ]; then MAKE=make; fi
bbnote make -j 4 "$@"
make -j 4 "$@" || die "oe_runmakefailed"}
die(){
bbfatal "$*"}
bbnote(){
echo "NOTE: $*"}
Quoted 8 lines
bbfatal(){
echo "ERROR: $*"
exit 1}
==============================================================Why would they be missing from this run.do_install script?
Is your recipe inheriting anything from base.bbclass?
-M
Quoted 20 lines · Gary Thomas
OE Build Configuration:
BB_VERSION= "1.15.0"TARGET_ARCH= "arm"TARGET_OS= "linux-gnueabi"
MACHINE = "cobra3530p60"
DISTRO = "amltd"DISTRO_VERSION= "1.1+snapshot-20111205"TUNE_FEATURES= "armv7a vfp neon cortexa8"TARGET_FPU= "vfp-neon"
meta
meta-yocto = "master:e5b9ac3b71b6c16fb9a629f12e4d83103db2d5b0"
...
NOTE: package glib-2.0-1_2.30.1-r0: taskdo_install: Started
ERROR: Function 'do_install' failed (see/home/local/p60_poky/tmp/work/armv7a-vfp-neon-amltd-linux-gnueabi/glib-2.0-1_2.30.1-r0/temp/log.do_install.8610for further information)
ERROR: Logfile of failure stored in:/home/local/p60_poky/tmp/work/armv7a-vfp-neon-amltd-linux-gnueabi/glib-2.0-1_2.30.1-r0/temp/log.do_install.8610Log data follows:
| DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common',
Quoted 9 lines
'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', 'common']
| ERROR: Function 'do_install' failed (see/home/local/p60_poky/tmp/work/armv7a-vfp-neon-amltd-linux-gnueabi/glib-2.0-1_2.30.1-r0/temp/log.do_install.8610for further information)
|/home/local/p60_poky/tmp/work/armv7a-vfp-neon-amltd-linux-gnueabi/glib-2.0-1_2.30.1-r0/temp/run.do_install.8610:
line 96:oe_runmake: command not found
NOTE: package glib-2.0-1_2.30.1-r0: taskdo_install: Failed
Have you made any changes recently? Often this is a mismatch ', `, " or similar somewhere.
Signature · 1 line
Tom
Quoted 31 lines · Tom Rini
Quoted 20 lines · Gary Thomas
OE Build Configuration:
BB_VERSION = "1.15.0" TARGET_ARCH = "arm" TARGET_OS = "linux-gnueabi" MACHINE = "cobra3530p60" DISTRO = "amltd" DISTRO_VERSION = "1.1+snapshot-20111205" TUNE_FEATURES = "armv7a vfp neon cortexa8" TARGET_FPU = "vfp-neon"meta
meta-yocto = "master:e5b9ac3b71b6c16fb9a629f12e4d83103db2d5b0"
...
NOTE: package glib-2.0-1_2.30.1-r0: taskdo_install: Started
ERROR: Function 'do_install' failed (see/home/local/p60_poky/tmp/work/armv7a-vfp-neon-amltd-linux-gnueabi/glib-2.0-1_2.30.1-r0/temp/log.do_install.8610for further information)
ERROR: Logfile of failure stored in:/home/local/p60_poky/tmp/work/armv7a-vfp-neon-amltd-linux-gnueabi/glib-2.0-1_2.30.1-r0/temp/log.do_install.8610Log data follows:
| DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common',Quoted 9 lines
'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', 'common']
| ERROR: Function 'do_install' failed (see/home/local/p60_poky/tmp/work/armv7a-vfp-neon-amltd-linux-gnueabi/glib-2.0-1_2.30.1-r0/temp/log.do_install.8610for further information)
|/home/local/p60_poky/tmp/work/armv7a-vfp-neon-amltd-linux-gnueabi/glib-2.0-1_2.30.1-r0/temp/run.do_install.8610:
line 96:oe_runmake: command not found
NOTE: package glib-2.0-1_2.30.1-r0: taskdo_install: Failed
Quoted 3 lines
Have you made any changes recently? Often this is a mismatch ', `, " or similar somewhere.
No local changes, it just wasn't working. I updated master (again) to
meta
meta-yocto = "master:f17e0ae38b2e6c4cbe7f0f9d76c3e1a386335fd1"
and now it builds. Don't know what the problem was, but I'm happy with it working once again.
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------