New package libmbus library for communicating with M-bus energy metering devices.

PATCH New Sagaert Johan 3 participants 5 messages Dec 10, 2011 – Jan 2, 2012

Share & tools

Sagaert Johan

author

2011-12-10 23:23 UTC #0 lore raw

PATCH 1/1 New package libmbus library for communicating with M-bus energy metering devices.

libmbus is an open source M-bus (Meter-Bus) library.
The Meter-Bus is a standard for reading out meter data from electricity meters, heat meters, gas meters, etc.

Signed-off-by Sagaert Johan <[email protected]>

---
 package/Config.in          |    1 +
 package/libmbus/Config.in  |    8 ++++++++
 package/libmbus/libmbus.mk |   14 ++++++++++++++
 3 files changed, 23 insertions(+), 0 deletions(-)
 create mode 100644 package/libmbus/Config.in
 create mode 100644 package/libmbus/libmbus.mk

package/Config.in +1 -0

index eb93b1c..9e9027d 100644
@@ -333,6 +333,7 @@ source "package/libmicrohttpd/Config.in"
 source "package/neon/Config.in"
 source "package/libmnl/Config.in"
 source "package/libmodbus/Config.in"
+source "package/libmbus/Config.in"
 source "package/libnl/Config.in"
 source "package/libpcap/Config.in"
 source "package/libosip2/Config.in"

package/libmbus/Config.in new file +8 -0

new file mode 100644
index 0000000..f545117
@@ -0,0 +1,8 @@
+config BR2_PACKAGE_LIBMBUS
+	bool "libmbus"
+	help
+	  libmbus is a library for communicating with energy metering devices.
+	  It supports TCP and RS232 M-bus gateways.
+	  (M-bus standard : http://www.m-bus.com/)
+	  
+	  http://www.freescada.com/libmbus

package/libmbus/libmbus.mk new file +14 -0

new file mode 100644
index 0000000..a6d31da
@@ -0,0 +1,14 @@
+#############################################################
+#
+# libmbus
+#
+#############################################################
+LIBMBUS_VERSION=0.6.1
+LIBMBUS_SITE=http://www.freescada.com/public-dist/
+LIBMBUS_INSTALL_STAGING=YES
+
+# Without this the build yields an error:
+#   cannot find input file: `test/Makefile.in'
+LIBMBUS_AUTORECONF=YES
+
+$(eval $(call AUTOTARGETS))

Signature · 1 line

1.7.8

Luca Ceresoli

2011-12-11 16:33 UTC #1 lore raw

PATCH 1/1 New package libmbus library for communicating with M-bus energy metering devices.

Quoted 4 lines · Sagaert Johan

libmbus is an open source M-bus (Meter-Bus) library.
The Meter-Bus is a standard for reading out meter data from electricity meters, heat meters, gas meters, etc.
Signed-off-by Sagaert Johan<[email protected]>

Reviewed-by Luca Ceresoli<[email protected]>

Thanks for contributing.

For future patch submissions, you should remember to add "v2" (then "v3", "v4" etc) to the [PATCH] prefix each time you resubmit a patch with modifications. This avoids confusion to the people reviewing and merging your patches. Take a look in the mailing-list for examples.

Luca

Quoted 54 lines

---
  package/Config.in          |    1 +
  package/libmbus/Config.in  |    8 ++++++++
  package/libmbus/libmbus.mk |   14 ++++++++++++++
  3 files changed, 23 insertions(+), 0 deletions(-)

create mode 100644 package/libmbus/Config.in
create mode 100644 package/libmbus/libmbus.mk

package/Config.in +1 -0

index eb93b1c..9e9027d 100644
@@ -333,6 +333,7 @@ source "package/libmicrohttpd/Config.in"
  source "package/neon/Config.in"
  source "package/libmnl/Config.in"
  source "package/libmodbus/Config.in"
+source "package/libmbus/Config.in"
  source "package/libnl/Config.in"
  source "package/libpcap/Config.in"
  source "package/libosip2/Config.in"

package/libmbus/Config.in new file +8 -0

new file mode 100644
index 0000000..f545117
@@ -0,0 +1,8 @@
+config BR2_PACKAGE_LIBMBUS
+	bool "libmbus"
+	help
+	  libmbus is a library for communicating with energy metering devices.
+	  It supports TCP and RS232 M-bus gateways.
+	  (M-bus standard : http://www.m-bus.com/)
+	
+	  http://www.freescada.com/libmbus

package/libmbus/libmbus.mk new file +14 -0

new file mode 100644
index 0000000..a6d31da
@@ -0,0 +1,14 @@
+#############################################################
+#
+# libmbus
+#
+#############################################################
+LIBMBUS_VERSION=0.6.1
+LIBMBUS_SITE=http://www.freescada.com/public-dist/
+LIBMBUS_INSTALL_STAGING=YES
+
+# Without this the build yields an error:
+#   cannot find input file: `test/Makefile.in'
+LIBMBUS_AUTORECONF=YES
+
+$(eval $(call AUTOTARGETS))

Sagaert Johan

author

2011-12-14 15:15 UTC #2 lore raw

PATCH 1/1 New package libmbus library for communicating with M-bus energy metering devices. not in latest git pull

I didn't notice the libmbus package in my latest git pull. Is there something wrong wit hit ?

Johan

-----Oorspronkelijk bericht-----
Van: Luca Ceresoli [mailto:luca at lucaceresoli.net]
Verzonden: zondag 11 december 2011 17:33
Aan: Sagaert Johan
CC: buildroot at busybox.net
Onderwerp: Re: [Buildroot] [PATCH 1/1] New package libmbus library for communicating with M-bus energy metering devices.

Quoted 4 lines · Sagaert Johan

libmbus is an open source M-bus (Meter-Bus) library.
The Meter-Bus is a standard for reading out meter data from electricity meters, heat meters, gas meters, etc.
Signed-off-by Sagaert Johan<[email protected]>

Reviewed-by Luca Ceresoli<[email protected]>

Thanks for contributing.

Luca

Quoted 54 lines

---
  package/Config.in          |    1 +
  package/libmbus/Config.in  |    8 ++++++++
  package/libmbus/libmbus.mk |   14 ++++++++++++++
  3 files changed, 23 insertions(+), 0 deletions(-)

create mode 100644 package/libmbus/Config.in
create mode 100644 package/libmbus/libmbus.mk

package/Config.in +1 -0

index eb93b1c..9e9027d 100644
@@ -333,6 +333,7 @@ source "package/libmicrohttpd/Config.in"
  source "package/neon/Config.in"
  source "package/libmnl/Config.in"
  source "package/libmodbus/Config.in"
+source "package/libmbus/Config.in"
  source "package/libnl/Config.in"
  source "package/libpcap/Config.in"
  source "package/libosip2/Config.in"

package/libmbus/Config.in new file +8 -0

new file mode 100644
index 0000000..f545117
@@ -0,0 +1,8 @@
+config BR2_PACKAGE_LIBMBUS
+	bool "libmbus"
+	help
+	  libmbus is a library for communicating with energy metering devices.
+	  It supports TCP and RS232 M-bus gateways.
+	  (M-bus standard : http://www.m-bus.com/)
+	
+	  http://www.freescada.com/libmbus

package/libmbus/libmbus.mk new file +14 -0

new file mode 100644
index 0000000..a6d31da
@@ -0,0 +1,14 @@
+#############################################################
+#
+# libmbus
+#
+#############################################################
+LIBMBUS_VERSION=0.6.1
+LIBMBUS_SITE=http://www.freescada.com/public-dist/
+LIBMBUS_INSTALL_STAGING=YES
+
+# Without this the build yields an error:
+#   cannot find input file: `test/Makefile.in'
+LIBMBUS_AUTORECONF=YES
+
+$(eval $(call AUTOTARGETS))

Luca Ceresoli

2011-12-14 17:47 UTC #3 lore raw

PATCH 1/1 New package libmbus library for communicating with M-bus energy metering devices. not in latest git pull

Quoted 4 lines · Sagaert Johan

Hi
I didn't notice the libmbus package in my latest git pull. Is there something wrong wit hit ?

I don't think there's anything wrong with your patch (My Reviewed-by means exactly this).

But the maintainer of Buildroot is Peter Korsgaard, not me, so it's him that chooses which patches to merge. It might take some days for him to find time to take a look at your mail, so you should wait at least 1~2 weeks before considering your patch "not merged". And if this time elapses and nothing happens, then you might send a ping email to revive the topic.

Luca

Peter Korsgaard

2012-01-02 21:21 UTC #4 lore raw

PATCH 1/1 New package libmbus library for communicating with M-bus energy metering devices.

In reply to Sagaert Johan

Quoted 1 line

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Sagaert" == Sagaert Johan <[email protected]> writes:

Sagaert> libmbus is an open source M-bus (Meter-Bus) library.
Sagaert> The Meter-Bus is a standard for reading out meter data from electricity meters, heat meters, gas meters, etc.

Committed, thanks.

Signature · 1 line

Bye, Peter Korsgaard