Skip to contentSkip to conversation

patches for -next

PATCH In review Ben Widawsky 3 participants 11 messages Dec 13, 2011 – Dec 14, 2011

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover patches for -next

This was all I could find regarding fairly stable patches which are fixes only. I feel like I'm missing one, but I gave up on looking

Ben Widawsky (4):
drm/i915: relative_constants_mode race fix
drm/i915: Force sync command ordering (Gen6+)
drm/i915: Update GEN6_RP_CONTROL definitions
drm/i915: drpc debugfs update for gen6

 drivers/gpu/drm/i915/i915_debugfs.c        |   86 +++++++++++++++++++++++++++-
 drivers/gpu/drm/i915/i915_gem_execbuffer.c |   32 +++++++----
 drivers/gpu/drm/i915/i915_reg.h            |   20 ++++++-
 drivers/gpu/drm/i915/intel_display.c       |    2 +-
 drivers/gpu/drm/i915/intel_ringbuffer.c    |    5 ++
 5 files changed, 129 insertions(+), 16 deletions(-)
Signature · 1 line
1.7.8
#1 lore raw

PATCH 1/4 drm/i915: relative_constants_mode race fix

dev_priv keeps track of the current addressing mode that gets set at execbuffer time. Unfortunately the existing code was doing this before acquiring struct_mutex which leaves a race with another thread also doing an execbuffer. If that wasn't bad enough, relocate_slow drops struct_mutex which opens a much more likely error where another thread comes in and modifies the state while relocate_slow is being slow.

The solution here is to just defer setting this state until we absolutely need it, and we know we'll have struct_mutex for the remainder of our code path.

v2: Keith noticed a bug in the original patch.

---
 drivers/gpu/drm/i915/i915_gem_execbuffer.c |   29 +++++++++++++++------------
 1 files changed, 16 insertions(+), 13 deletions(-)
drivers/gpu/drm/i915/i915_gem_execbuffer.c +16 -13
index 3693e83..be0e3bc 100644
@@ -1016,19 +1016,6 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,
 			if (INTEL_INFO(dev)->gen > 5 &&
 			    mode == I915_EXEC_CONSTANTS_REL_SURFACE)
 				return -EINVAL;
-
-			ret = intel_ring_begin(ring, 4);
-			if (ret)
-				return ret;
-
-			intel_ring_emit(ring, MI_NOOP);
-			intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(1));
-			intel_ring_emit(ring, INSTPM);
-			intel_ring_emit(ring,
-					I915_EXEC_CONSTANTS_MASK << 16 | mode);
-			intel_ring_advance(ring);
-
-			dev_priv->relative_constants_mode = mode;
 		}
 		break;
 	default:
@@ -1159,6 +1146,22 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,
 		}
 	}
 
+	if (ring == &dev_priv->ring[RCS] &&
+	    mode != dev_priv->relative_constants_mode) {
+		ret = intel_ring_begin(ring, 4);
+		if (ret)
+				goto err;
+
+		intel_ring_emit(ring, MI_NOOP);
+		intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(1));
+		intel_ring_emit(ring, INSTPM);
+		intel_ring_emit(ring,
+				I915_EXEC_CONSTANTS_MASK << 16 | mode);
+		intel_ring_advance(ring);
+
+		dev_priv->relative_constants_mode = mode;
+	}
+
 	trace_i915_gem_ring_dispatch(ring, seqno);
 
 	exec_start = batch_obj->gtt_offset + args->batch_start_offset;
Signature · 1 line
1.7.8
#2 lore raw

PATCH 2/4 drm/i915: Force sync command ordering (Gen6+)

In reply to Ben Widawsky

The docs say this is required for Gen7, and since the bit was added for Gen6, we are also setting it there pit pf paranoia. Particularly as Chris points out, if PIPE_CONTROL counts as a 3d state packet.

This was found through doc inspection by Ken and applies to Gen6+;

---
 drivers/gpu/drm/i915/i915_gem_execbuffer.c |    9 +++++++--
 drivers/gpu/drm/i915/i915_reg.h            |    1 +
 drivers/gpu/drm/i915/intel_ringbuffer.c    |    5 +++++
 3 files changed, 13 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/i915_gem_execbuffer.c +7 -2
index be0e3bc..46e6031 100644
@@ -967,6 +967,7 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,
 	struct intel_ring_buffer *ring;
 	u32 exec_start, exec_len;
 	u32 seqno;
+	u32 mask;
 	int ret, mode, i;
 
 	if (!i915_gem_check_execbuffer(args)) {
@@ -1004,6 +1005,7 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,
 	}
 
 	mode = args->flags & I915_EXEC_CONSTANTS_MASK;
+	mask = I915_EXEC_CONSTANTS_MASK;
 	switch (mode) {
 	case I915_EXEC_CONSTANTS_REL_GENERAL:
 	case I915_EXEC_CONSTANTS_ABSOLUTE:
@@ -1016,6 +1018,10 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,
 			if (INTEL_INFO(dev)->gen > 5 &&
 			    mode == I915_EXEC_CONSTANTS_REL_SURFACE)
 				return -EINVAL;
+
+			/* The HW changed the meaning on this bit on gen6 */
+			if (INTEL_INFO(dev)->gen >= 6)
+				mask &= ~I915_EXEC_CONSTANTS_REL_SURFACE;
 		}
 		break;
 	default:
@@ -1155,8 +1161,7 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,
 		intel_ring_emit(ring, MI_NOOP);
 		intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(1));
 		intel_ring_emit(ring, INSTPM);
-		intel_ring_emit(ring,
-				I915_EXEC_CONSTANTS_MASK << 16 | mode);
+		intel_ring_emit(ring, mask << 16 | mode);
 		intel_ring_advance(ring);
 
 		dev_priv->relative_constants_mode = mode;
drivers/gpu/drm/i915/i915_reg.h +1 -0
index b080cc8..d34e7d8 100644
@@ -442,6 +442,7 @@
 #define   INSTPM_AGPBUSY_DIS (1<<11) /* gen3: when disabled, pending interrupts
 					will not assert AGPBUSY# and will only
 					be delivered when out of C3. */
+#define   INSTPM_FORCE_ORDERING				(1<<7) /* GEN6+ */
 #define ACTHD	        0x020c8
 #define FW_BLC		0x020d8
 #define FW_BLC2		0x020dc
drivers/gpu/drm/i915/intel_ringbuffer.c +5 -0
index ca70e2f..f5dae5de 100644
@@ -414,6 +414,11 @@ static int init_render_ring(struct intel_ring_buffer *ring)
 			return ret;
 	}
 
+	if (INTEL_INFO(dev)->gen >= 6) {
+		I915_WRITE(INSTPM,
+			   INSTPM_FORCE_ORDERING << 16 | INSTPM_FORCE_ORDERING);
+	}
+
 	return ret;
 }
 
Signature · 1 line
1.7.8
#3 lore raw

PATCH 3/4 drm/i915: Update GEN6_RP_CONTROL definitions

In reply to Ben Widawsky

This matches the modern specs more accurately.

This will be used by the following patch to fix the way we display RC status.

---
 drivers/gpu/drm/i915/i915_reg.h      |    6 +++++-
 drivers/gpu/drm/i915/intel_display.c |    2 +-
 2 files changed, 6 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +5 -1
index d34e7d8..a7abd7b 100644
@@ -3479,7 +3479,11 @@
 #define   GEN6_CAGF_MASK			(0x7f << GEN6_CAGF_SHIFT)
 #define GEN6_RP_CONTROL				0xA024
 #define   GEN6_RP_MEDIA_TURBO			(1<<11)
-#define   GEN6_RP_USE_NORMAL_FREQ		(1<<9)
+#define   GEN6_RP_MEDIA_MODE_MASK		(3<<9)
+#define   GEN6_RP_MEDIA_HW_TURBO_MODE		(3<<9)
+#define   GEN6_RP_MEDIA_HW_NORMAL_MODE		(2<<9)
+#define   GEN6_RP_MEDIA_HW_MODE			(1<<9)
+#define   GEN6_RP_MEDIA_SW_MODE			(0<<9)
 #define   GEN6_RP_MEDIA_IS_GFX			(1<<8)
 #define   GEN6_RP_ENABLE			(1<<7)
 #define   GEN6_RP_UP_IDLE_MIN			(0x1<<3)
drivers/gpu/drm/i915/intel_display.c +1 -1
index e77a863..d33cd86 100644
@@ -7950,7 +7950,7 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv)
 	I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10);
 	I915_WRITE(GEN6_RP_CONTROL,
 		   GEN6_RP_MEDIA_TURBO |
-		   GEN6_RP_USE_NORMAL_FREQ |
+		   GEN6_RP_MEDIA_HW_MODE |
 		   GEN6_RP_MEDIA_IS_GFX |
 		   GEN6_RP_ENABLE |
 		   GEN6_RP_UP_BUSY_AVG |
Signature · 1 line
1.7.8
Reviewed-by on v1 3/4
#4 lore raw

Re: [PATCH 3/4] drm/i915: Update GEN6_RP_CONTROL definitions

Quoted 7 lines · On Mon, 12 Dec 2011 19:21:59 -0800 Ben Widawsky <[email protected]> wrote:

This matches the modern specs more accurately.

This will be used by the following patch to fix the way we display RC status.

---

Looks good.

Signature · 1 line
Jesse Barnes, Intel Open Source Technology Center

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reviewed-by on v1 3/4
#5 lore raw

Re: [PATCH 3/4] drm/i915: Update GEN6_RP_CONTROL definitions

In reply to Ben Widawsky
Quoted 7 lines · Ben Widawsky

This matches the modern specs more accurately.

This will be used by the following patch to fix the way we display RC status.

Signature · 2 lines
Eugeni Dodonov
<http://eugeni.dodonov.net/>

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

#6 lore raw

PATCH 4/4 drm/i915: drpc debugfs update for gen6

In reply to Ben Widawsky

Many of the old fields from Ironlake have gone away. Strip all those fields, and try to update to fields people care about. RC information isn't exactly ideal anymore. All we can guarantee when we read the register is that we're not using forcewake, ie. the software isn't forcing the hardware to stay awake. The downside is that in doing this we may wait a while and that causes an unnaturally idle state on the GPU.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42578

---
 drivers/gpu/drm/i915/i915_debugfs.c |   86 ++++++++++++++++++++++++++++++++++-
 drivers/gpu/drm/i915/i915_reg.h     |   13 +++++-
 2 files changed, 97 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/i915_debugfs.c +85 -1
index f2e0207..e74e384 100644
@@ -999,7 +999,7 @@ static int i915_inttoext_table(struct seq_file *m, void *unused)
 	return 0;
 }
 
-static int i915_drpc_info(struct seq_file *m, void *unused)
+static int ironlake_drpc_info(struct seq_file *m)
 {
 	struct drm_info_node *node = (struct drm_info_node *) m->private;
 	struct drm_device *dev = node->minor->dev;
@@ -1066,6 +1066,90 @@ static int i915_drpc_info(struct seq_file *m, void *unused)
 	return 0;
 }
 
+static int gen6_drpc_info(struct seq_file *m)
+{
+
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 rpmodectl1, gt_core_status, rcctl1;
+	int count=0, ret;
+
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	if (atomic_read(&dev_priv->forcewake_count)) {
+		seq_printf(m, "RC information inaccurate because userspace "
+			      "holds a reference \n");
+	} else {
+		/* NB: we cannot use forcewake, else we read the wrong values */
+		while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_ACK) & 1))
+			udelay(10);
+		seq_printf(m, "RC information accurate: %s\n", yesno(count < 51));
+	}
+
+	gt_core_status = readl(dev_priv->regs + GEN6_GT_CORE_STATUS);
+	trace_i915_reg_rw(false, GEN6_GT_CORE_STATUS, gt_core_status, 4);
+
+	rpmodectl1 = I915_READ(GEN6_RP_CONTROL);
+	rcctl1 = I915_READ(GEN6_RC_CONTROL);
+	mutex_unlock(&dev->struct_mutex);
+
+	seq_printf(m, "Video Turbo Mode: %s\n",
+		   yesno(rpmodectl1 & GEN6_RP_MEDIA_TURBO));
+	seq_printf(m, "HW control enabled: %s\n",
+		   yesno(rpmodectl1 & GEN6_RP_ENABLE));
+	seq_printf(m, "SW control enabled: %s\n",
+		   yesno((rpmodectl1 & GEN6_RP_MEDIA_MODE_MASK) ==
+			  GEN6_RP_MEDIA_SW_MODE));
+	seq_printf(m, "RC6 Enabled: %s\n",
+		   yesno(rcctl1 & GEN6_RC_CTL_RC1e_ENABLE));
+	seq_printf(m, "RC6 Enabled: %s\n",
+		   yesno(rcctl1 & GEN6_RC_CTL_RC6_ENABLE));
+	seq_printf(m, "Deep RC6 Enabled: %s\n",
+		   yesno(rcctl1 & GEN6_RC_CTL_RC6p_ENABLE));
+	seq_printf(m, "Deepest RC6 Enabled: %s\n",
+		   yesno(rcctl1 & GEN6_RC_CTL_RC6pp_ENABLE));
+	seq_printf(m, "Current RC state: ");
+	switch (gt_core_status & GEN6_RCn_MASK) {
+	case GEN6_RC0:
+		if (gt_core_status & GEN6_CORE_CPD_STATE_MASK)
+			seq_printf(m, "Core Power Down\n");
+		else
+			seq_printf(m, "on\n");
+		break;
+	case GEN6_RC3:
+		seq_printf(m, "RC3\n");
+		break;
+	case GEN6_RC6:
+		seq_printf(m, "RC6\n");
+		break;
+	case GEN6_RC7:
+		seq_printf(m, "RC7\n");
+		break;
+	default:
+		seq_printf(m, "Unknown\n");
+		break;
+	}
+
+	seq_printf(m, "Core Power Down: %s\n",
+		   yesno(gt_core_status & GEN6_CORE_CPD_STATE_MASK));
+	return 0;
+}
+
+static int i915_drpc_info(struct seq_file *m, void *unused)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+
+	if (IS_GEN6(dev) || IS_GEN7(dev))
+		return gen6_drpc_info(m);
+	else
+		return ironlake_drpc_info(m);
+}
+
 static int i915_fbc_status(struct seq_file *m, void *unused)
 {
 	struct drm_info_node *node = (struct drm_info_node *) m->private;
drivers/gpu/drm/i915/i915_reg.h +12 -1
index a7abd7b..b85c946 100644
@@ -3459,8 +3459,11 @@
 # define GEN6_RCCUNIT_CLOCK_GATE_DISABLE		(1 << 11)
 
 #define GEN6_RPNSWREQ				0xA008
+#define GEN6_GT_THREAD_P_REQ			0x13807C
 #define   GEN6_TURBO_DISABLE			(1<<31)
-#define   GEN6_FREQUENCY(x)			((x)<<25)
+#define   GEN6_FREQUENCY_SHIFT			25
+#define   GEN6_FREQUENCY_MASK			0x3f
+#define   GEN6_FREQUENCY(x)			((x)<<GEN6_FREQUENCY_SHIFT)
 #define   GEN6_OFFSET(x)			((x)<<19)
 #define   GEN6_AGGRESSIVE_TURBO			(0<<15)
 #define GEN6_RC_VIDEO_FREQ			0xA00C
@@ -3540,6 +3543,14 @@
 #define GEN6_PCODE_DATA				0x138128
 #define   GEN6_PCODE_FREQ_IA_RATIO_SHIFT	8
 
+#define GEN6_GT_CORE_STATUS		0x138060
+#define   GEN6_CORE_CPD_STATE_MASK	(7<<4)
+#define   GEN6_RCn_MASK			7
+#define   GEN6_RC0			0
+#define   GEN6_RC3			2
+#define   GEN6_RC6			3
+#define   GEN6_RC7			4
+
 #define G4X_AUD_VID_DID			0x62020
 #define INTEL_AUDIO_DEVCL		0x808629FB
 #define INTEL_AUDIO_DEVBLC		0x80862801
Signature · 1 line
1.7.8
#7 lore raw

Re: [PATCH 4/4] drm/i915: drpc debugfs update for gen6

Quoted 10 lines · Ben Widawsky

Many of the old fields from Ironlake have gone away. Strip all those fields, and try to update to fields people care about. RC information isn't exactly ideal anymore. All we can guarantee when we read the register is that we're not using forcewake, ie. the software isn't forcing the hardware to stay awake. The downside is that in doing this we may wait a while and that causes an unnaturally idle state on the GPU.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42578

Nak this because of a merge error.

Reviewed-by on v1 4/4
#8 lore raw

Re: [PATCH 4/4] drm/i915: drpc debugfs update for gen6

In reply to Ben Widawsky
Quoted 11 lines · On Mon, 12 Dec 2011 19:22:00 -0800 Ben Widawsky <[email protected]> wrote:

Many of the old fields from Ironlake have gone away. Strip all those fields, and try to update to fields people care about. RC information isn't exactly ideal anymore. All we can guarantee when we read the register is that we're not using forcewake, ie. the software isn't forcing the hardware to stay awake. The downside is that in doing this we may wait a while and that causes an unnaturally idle state on the GPU.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42578

---

Aside from the merge error:

Signature · 1 line
Jesse Barnes, Intel Open Source Technology Center

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reviewed-by
#9 lore raw

Re: [PATCH 4/4] drm/i915: drpc debugfs update for gen6

Quoted 11 lines · Jesse Barnes
Quoted 8 lines · On Mon, 12 Dec 2011 19:22:00 -0800 Ben Widawsky <[email protected]> wrote:

Many of the old fields from Ironlake have gone away. Strip all those fields, and try to update to fields people care about. RC information isn't exactly ideal anymore. All we can guarantee when we read the register is that we're not using forcewake, ie. the software isn't forcing the hardware to stay awake. The downside is that in doing this we may wait a while and that causes an unnaturally idle state on the GPU.

Quoted 8 lines
Quoted 3 lines

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42578

---

Aside from the merge error:

Signature · 2 lines
Eugeni Dodonov
<http://eugeni.dodonov.net/>

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

#10 lore raw

PATCH v2 4/4 drm/i915: drpc debugfs update for gen6

In reply to Ben Widawsky

Many of the old fields from Ironlake have gone away. Strip all those fields, and try to update to fields people care about. RC information isn't exactly ideal anymore. All we can guarantee when we read the register is that we're not using forcewake, ie. the software isn't forcing the hardware to stay awake. The downside is that in doing this we may wait a while and that causes an unnaturally idle state on the GPU.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42578

---
 drivers/gpu/drm/i915/i915_debugfs.c |   86 ++++++++++++++++++++++++++++++++++-
 drivers/gpu/drm/i915/i915_reg.h     |    8 +++
 2 files changed, 93 insertions(+), 1 deletions(-)
drivers/gpu/drm/i915/i915_debugfs.c +85 -1
index f2e0207..e74e384 100644
@@ -999,7 +999,7 @@ static int i915_inttoext_table(struct seq_file *m, void *unused)
 	return 0;
 }
 
-static int i915_drpc_info(struct seq_file *m, void *unused)
+static int ironlake_drpc_info(struct seq_file *m)
 {
 	struct drm_info_node *node = (struct drm_info_node *) m->private;
 	struct drm_device *dev = node->minor->dev;
@@ -1066,6 +1066,90 @@ static int i915_drpc_info(struct seq_file *m, void *unused)
 	return 0;
 }
 
+static int gen6_drpc_info(struct seq_file *m)
+{
+
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 rpmodectl1, gt_core_status, rcctl1;
+	int count=0, ret;
+
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	if (atomic_read(&dev_priv->forcewake_count)) {
+		seq_printf(m, "RC information inaccurate because userspace "
+			      "holds a reference \n");
+	} else {
+		/* NB: we cannot use forcewake, else we read the wrong values */
+		while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_ACK) & 1))
+			udelay(10);
+		seq_printf(m, "RC information accurate: %s\n", yesno(count < 51));
+	}
+
+	gt_core_status = readl(dev_priv->regs + GEN6_GT_CORE_STATUS);
+	trace_i915_reg_rw(false, GEN6_GT_CORE_STATUS, gt_core_status, 4);
+
+	rpmodectl1 = I915_READ(GEN6_RP_CONTROL);
+	rcctl1 = I915_READ(GEN6_RC_CONTROL);
+	mutex_unlock(&dev->struct_mutex);
+
+	seq_printf(m, "Video Turbo Mode: %s\n",
+		   yesno(rpmodectl1 & GEN6_RP_MEDIA_TURBO));
+	seq_printf(m, "HW control enabled: %s\n",
+		   yesno(rpmodectl1 & GEN6_RP_ENABLE));
+	seq_printf(m, "SW control enabled: %s\n",
+		   yesno((rpmodectl1 & GEN6_RP_MEDIA_MODE_MASK) ==
+			  GEN6_RP_MEDIA_SW_MODE));
+	seq_printf(m, "RC6 Enabled: %s\n",
+		   yesno(rcctl1 & GEN6_RC_CTL_RC1e_ENABLE));
+	seq_printf(m, "RC6 Enabled: %s\n",
+		   yesno(rcctl1 & GEN6_RC_CTL_RC6_ENABLE));
+	seq_printf(m, "Deep RC6 Enabled: %s\n",
+		   yesno(rcctl1 & GEN6_RC_CTL_RC6p_ENABLE));
+	seq_printf(m, "Deepest RC6 Enabled: %s\n",
+		   yesno(rcctl1 & GEN6_RC_CTL_RC6pp_ENABLE));
+	seq_printf(m, "Current RC state: ");
+	switch (gt_core_status & GEN6_RCn_MASK) {
+	case GEN6_RC0:
+		if (gt_core_status & GEN6_CORE_CPD_STATE_MASK)
+			seq_printf(m, "Core Power Down\n");
+		else
+			seq_printf(m, "on\n");
+		break;
+	case GEN6_RC3:
+		seq_printf(m, "RC3\n");
+		break;
+	case GEN6_RC6:
+		seq_printf(m, "RC6\n");
+		break;
+	case GEN6_RC7:
+		seq_printf(m, "RC7\n");
+		break;
+	default:
+		seq_printf(m, "Unknown\n");
+		break;
+	}
+
+	seq_printf(m, "Core Power Down: %s\n",
+		   yesno(gt_core_status & GEN6_CORE_CPD_STATE_MASK));
+	return 0;
+}
+
+static int i915_drpc_info(struct seq_file *m, void *unused)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+
+	if (IS_GEN6(dev) || IS_GEN7(dev))
+		return gen6_drpc_info(m);
+	else
+		return ironlake_drpc_info(m);
+}
+
 static int i915_fbc_status(struct seq_file *m, void *unused)
 {
 	struct drm_info_node *node = (struct drm_info_node *) m->private;
drivers/gpu/drm/i915/i915_reg.h +8 -0
index a7abd7b..4c59d0a 100644
@@ -3540,6 +3540,14 @@
 #define GEN6_PCODE_DATA				0x138128
 #define   GEN6_PCODE_FREQ_IA_RATIO_SHIFT	8
 
+#define GEN6_GT_CORE_STATUS		0x138060
+#define   GEN6_CORE_CPD_STATE_MASK	(7<<4)
+#define   GEN6_RCn_MASK			7
+#define   GEN6_RC0			0
+#define   GEN6_RC3			2
+#define   GEN6_RC6			3
+#define   GEN6_RC7			4
+
 #define G4X_AUD_VID_DID			0x62020
 #define INTEL_AUDIO_DEVCL		0x808629FB
 #define INTEL_AUDIO_DEVBLC		0x80862801
Signature · 1 line
1.7.8