snd-usb endpoint logic rework, version 3
cover snd-usb endpoint logic rework, version 3
This is the 3rd round, and I didn't mark it RFC anymore as Clemens and Takashi agreed on the way of implementation in general.
So in comparison to the last version, this round incorporates some spinlock fixes, a lot less debugging output and my S-o-b lines.
Please test this extensively with different sound cards.
I didn't experience a single problem over the last hours of testing, but the more testing the better.
Thanks,
Daniel
Daniel Mack (5):
ALSA: snd-usb: add snd_usb_audio-wide mutex
ALSA: snd-usb: implement new endpoint streaming model
ALSA: snd-usb: switch over to new endpoint streaming logic
ALSA: snd-usb: remove old streaming logic
ALSA: snd-usb: add support for implicit feedback
sound/usb/card.c | 8 +- sound/usb/card.h | 65 +++ sound/usb/endpoint.c | 1427 +++++++++++++++++++++++++------------------------- sound/usb/endpoint.h | 31 +- sound/usb/pcm.c | 428 +++++++++++++--- sound/usb/stream.c | 31 +- sound/usb/usbaudio.h | 2 + 7 files changed, 1191 insertions(+), 801 deletions(-)
Signature · 1 line
1.7.5.4
PATCH 1/5 ALSA: snd-usb: add snd_usb_audio-wide mutex
This is needed for new card-wide list operations.
--- sound/usb/card.c | 2 ++ sound/usb/usbaudio.h | 1 + 2 files changed, 3 insertions(+), 0 deletions(-)
sound/usb/card.c +2 -0
@@ -276,6 +276,7 @@ static int snd_usb_create_streams(struct snd_usb_audio *chip, int ctrlif)static int snd_usb_audio_free (struct snd_usb_audio *chip) { +mutex_destroy (&chip->mutex);kfree (chip);return 0 ; }
@@ -336,6 +337,7 @@ static int snd_usb_audio_create(struct usb_device *dev, int idx,return -ENOMEM ; } +mutex_init (&chip->mutex);mutex_init (&chip->shutdown_mutex); chip->index = idx; chip->dev = dev;
sound/usb/usbaudio.h +1 -0
@@ -36,6 +36,7 @@ struct snd_usb_audio {struct snd_card *card;struct usb_interface *pm_intf;u32 usb_id; +struct mutex mutex;struct mutex shutdown_mutex; unsigned int shutdown:1; unsigned int probing:1;
Signature · 1 line
1.7.5.4
PATCH 2/5 ALSA: snd-usb: implement new endpoint streaming model
In reply to Daniel MackIn order to split changes properly, this patch only adds the new implementation but leaves the old one around, so the the driver doesn't change its behaviour. The switch to actually use the new code is submitted separately.
--- sound/usb/card.h | 60 ++++ sound/usb/endpoint.c | 904 +++++++++++++++++++++++++++++++++++++++++++++++++- sound/usb/endpoint.h | 25 ++ sound/usb/usbaudio.h | 1 + 4 files changed, 979 insertions(+), 11 deletions(-)
sound/usb/card.h +60 -0
@@ -29,13 +29,17 @@ struct audioformat { };struct snd_usb_substream ; +struct snd_usb_endpoint ;struct snd_urb_ctx {struct urb *urb;unsigned int buffer_size;/* size of data buffer, if data URB */ struct snd_usb_substream *subs; +struct snd_usb_endpoint *ep;int index;/* index for urb array */ int packets;/* number of packets per urb */ +int packet_size[MAX_PACKS_HS ];/* size of packets for next submission */ +struct list_head ready_list; };struct snd_urb_ops {
@@ -45,6 +49,62 @@ struct snd_urb_ops {int (*retire_sync)(struct snd_usb_substream *subs,struct snd_pcm_runtime *runtime,struct urb *u); }; +struct snd_usb_endpoint { +struct snd_usb_audio *chip; + +int use_count; +int ep_num;/* the referenced endpoint number */ +int type;/* SND_USB_ENDPOINT_TYPE_* */ +int activated; + +void (* prepare_data_urb) (struct snd_usb_substream *subs, +struct urb *urb); +void (* retire_data_urb) (struct snd_usb_substream *subs, +struct urb *urb); + +struct snd_usb_substream *data_subs; +struct snd_usb_endpoint *sync_master; +struct snd_usb_endpoint *sync_slave; + +struct snd_urb_ctx urb[MAX_URBS ]; + + +struct snd_usb_packet_info { +uint32_t packet_size[MAX_PACKS_HS ]; +int packets; + } next_packet[MAX_URBS ]; +int next_packet_read_pos, next_packet_write_pos; +struct list_head ready_playback_urbs; +struct tasklet_struct outbound_tasklet; + +unsigned int nurbs;/* # urbs */ +unsigned long active_mask;/* bitmask of active urbs */ +unsigned long unlink_mask;/* bitmask of unlinked urbs */ +char *syncbuf;/* sync buffer for all sync URBs */ +dma_addr_t sync_dma;/* DMA address of syncbuf */ + +unsigned int pipe;/* the data i/o pipe */ +unsigned int freqn;/* nominal sampling rate in fs/fps in Q16.16 format */ +unsigned int freqm;/* momentary sampling rate in fs/fps in Q16.16 format */ +int freqshift;/* how much to shift the feedback value to get Q16.16 */ +unsigned int freqmax;/* maximum sampling rate, used for buffer management */ +unsigned int phase;/* phase accumulator */ +unsigned int maxpacksize;/* max packet size in bytes */ +unsigned int maxframesize;/* max packet size in frames */ +unsigned int curpacksize;/* current packet size in bytes (for capture) */ +unsigned int curframesize;/* current packet size in frames (for capture) */ +unsigned int syncmaxsize;/* sync endpoint packet size */ +unsigned int fill_max:1 ;/* fill max packet size always */ +unsigned int datainterval;/* log_2 of data packet interval */ +unsigned int syncinterval;/* P for adaptive mode, 0 otherwise */ +unsigned char silence_value; +unsigned int stride; +int iface, alt_idx; + +spinlock_t lock; +struct list_head list; +}; +struct snd_usb_substream {struct snd_usb_stream *stream;struct usb_device *dev;
sound/usb/endpoint.c +893 -11
970 lines not on this page · raw message
sound/usb/endpoint.h +25 -0
@@ -18,4 +18,29 @@ int snd_usb_substream_prepare(struct snd_usb_substream *subs,int snd_usb_substream_playback_trigger (struct snd_pcm_substream *substream,int cmd);int snd_usb_substream_capture_trigger (struct snd_pcm_substream *substream,int cmd); + +#define SND_USB_ENDPOINT_TYPE_DATA 0 +#define SND_USB_ENDPOINT_TYPE_SYNC 1 + +struct snd_usb_endpoint *snd_usb_add_endpoint (struct snd_usb_audio *chip, +struct usb_host_interface *alts, +int ep_num,int direction,int type); + +int snd_usb_endpoint_set_params (struct snd_usb_endpoint *ep, +struct snd_pcm_hw_params *hw_params, +struct audioformat *fmt, +struct snd_usb_endpoint *sync_ep); + +int snd_usb_endpoint_start (struct snd_usb_endpoint *ep); +void snd_usb_endpoint_stop (struct snd_usb_endpoint *ep,int force,int can_sleep); +int snd_usb_endpoint_activate (struct snd_usb_endpoint *ep); +int snd_usb_endpoint_deactivate (struct snd_usb_endpoint *ep); +void snd_usb_endpoint_free (struct list_head *head); + +int snd_usb_endpoint_implict_feedback_sink (struct snd_usb_endpoint *ep); + +void snd_usb_handle_sync_urb (struct snd_usb_endpoint *ep, +struct snd_usb_endpoint *sender, +const struct urb *urb); +#endif /* __USBAUDIO_ENDPOINT_H */
sound/usb/usbaudio.h +1 -0
@@ -47,6 +47,7 @@ struct snd_usb_audio {int num_suspended_intf;struct list_head pcm_list;/* list of pcm streams */ +struct list_head ep_list;/* list of audio-related endpoints */ int pcm_devs;struct list_head midi_list;/* list of midi interfaces */
Signature · 1 line
1.7.5.4
PATCH 3/5 ALSA: snd-usb: switch over to new endpoint streaming logic
In reply to Daniel MackAll endpoint related code is now in endpoint.c, and pcm.c only acts as wrapper for handling the packet's payload.
--- sound/usb/card.c | 6 +- sound/usb/card.h | 5 + sound/usb/endpoint.c | 40 ----- sound/usb/endpoint.h | 3 - sound/usb/pcm.c | 407 +++++++++++++++++++++++++++++++++++++++++--------- sound/usb/stream.c | 31 ++++- 6 files changed, 373 insertions(+), 119 deletions(-)
sound/usb/card.c +5 -1
@@ -131,7 +131,6 @@ static void snd_usb_stream_disconnect(struct list_head *head) subs = &as->substream[idx];if (!subs->num_formats)continue ; -snd_usb_release_substream_urbs (subs,1 ); subs->interface =-1 ; } }
@@ -350,6 +349,7 @@ static int snd_usb_audio_create(struct usb_device *dev, int idx, chip->usb_id =USB_ID (le16_to_cpu (dev->descriptor.idVendor),le16_to_cpu (dev->descriptor.idProduct));INIT_LIST_HEAD (&chip->pcm_list); +INIT_LIST_HEAD (&chip->ep_list);INIT_LIST_HEAD (&chip->midi_list);INIT_LIST_HEAD (&chip->mixer_list);
@@ -567,6 +567,10 @@ static void snd_usb_audio_disconnect(struct usb_device *dev,list_for_each (p, &chip->pcm_list) {snd_usb_stream_disconnect (p); } +/* release the endpoint resources */ +list_for_each (p, &chip->ep_list) { +snd_usb_endpoint_free (p); + }/* release the midi resources */ list_for_each (p, &chip->midi_list) {snd_usbmidi_disconnect (p);
sound/usb/card.h +5 -0
@@ -146,6 +146,11 @@ struct snd_usb_substream {struct snd_urb_ctx syncurb[SYNC_URBS ];/* sync urb table */ char *syncbuf;/* sync buffer for all sync URBs */ dma_addr_t sync_dma;/* DMA address of syncbuf */ +/* data and sync endpoints for this stream */ +struct snd_usb_endpoint *data_endpoint; +struct snd_usb_endpoint *sync_endpoint; + unsigned int data_endpoint_started:1; + unsigned int sync_endpoint_started:1;u64 formats;/* format bitmasks (all or'ed) */ unsigned int num_formats;/* number of supported audio formats (list) */
sound/usb/endpoint.c +0 -40
@@ -908,46 +908,6 @@ void snd_usb_init_substream(struct snd_usb_stream *as, subs->fmt_type = fp->fmt_type; } -int snd_usb_substream_playback_trigger (struct snd_pcm_substream *substream,int cmd) -{ -struct snd_usb_substream *subs = substream->runtime->private_data; - -switch (cmd) { -case SNDRV_PCM_TRIGGER_START : -case SNDRV_PCM_TRIGGER_PAUSE_RELEASE : - subs->ops.prepare = prepare_playback_urb; -return 0 ; -case SNDRV_PCM_TRIGGER_STOP : -return deactivate_urbs_old (subs,0 ,0 ); -case SNDRV_PCM_TRIGGER_PAUSE_PUSH : - subs->ops.prepare = prepare_nodata_playback_urb; -return 0 ; - } - -return -EINVAL ; -} - -int snd_usb_substream_capture_trigger (struct snd_pcm_substream *substream,int cmd) -{ -struct snd_usb_substream *subs = substream->runtime->private_data; - -switch (cmd) { -case SNDRV_PCM_TRIGGER_START : - subs->ops.retire = retire_capture_urb; -return start_urbs (subs, substream->runtime); -case SNDRV_PCM_TRIGGER_STOP : -return deactivate_urbs_old (subs,0 ,0 ); -case SNDRV_PCM_TRIGGER_PAUSE_PUSH : - subs->ops.retire = retire_paused_capture_urb; -return 0 ; -case SNDRV_PCM_TRIGGER_PAUSE_RELEASE : - subs->ops.retire = retire_capture_urb; -return 0 ; - } - -return -EINVAL ; -} -int snd_usb_substream_prepare (struct snd_usb_substream *subs,struct snd_pcm_runtime *runtime) {
sound/usb/endpoint.h +0 -3
@@ -15,9 +15,6 @@ void snd_usb_release_substream_urbs(struct snd_usb_substream *subs, int force);int snd_usb_substream_prepare (struct snd_usb_substream *subs,struct snd_pcm_runtime *runtime); -int snd_usb_substream_playback_trigger (struct snd_pcm_substream *substream,int cmd); -int snd_usb_substream_capture_trigger (struct snd_pcm_substream *substream,int cmd); -#define SND_USB_ENDPOINT_TYPE_DATA 0#define SND_USB_ENDPOINT_TYPE_SYNC 1
sound/usb/pcm.c +335 -72
481 lines not on this page · raw message
sound/usb/stream.c +28 -3
@@ -73,6 +73,31 @@ static void snd_usb_audio_pcm_free(struct snd_pcm *pcm) } } +/* +* initialize the substream instance. +*/ + +static void snd_usb_init_substream (struct snd_usb_stream *as, +int stream, +struct audioformat *fp) +{ +struct snd_usb_substream *subs = &as->substream[stream]; + +INIT_LIST_HEAD (&subs->fmt_list); +spin_lock_init (&subs->lock); + + subs->stream = as; + subs->direction = stream; + subs->dev = as->chip->dev; + subs->txfr_quirk = as->chip->txfr_quirk; + +snd_usb_set_pcm_ops (as->pcm, stream); + +list_add_tail (&fp->list, &subs->fmt_list); + subs->formats |= fp->formats; + subs->num_formats++; + subs->fmt_type = fp->fmt_type; +}/* * add this endpoint to the chip instance.
@@ -94,9 +119,9 @@ int snd_usb_add_audio_stream(struct snd_usb_audio *chip,if (as->fmt_type != fp->fmt_type)continue ; subs = &as->substream[stream]; -if (!subs->endpoint) +if (!subs->data_endpoint)continue ; -if (subs->endpoint == fp->endpoint) { +if (subs->data_endpoint->ep_num == fp->endpoint) {list_add_tail (&fp->list, &subs->fmt_list); subs->num_formats++; subs->formats |= fp->formats;
@@ -109,7 +134,7 @@ int snd_usb_add_audio_stream(struct snd_usb_audio *chip,if (as->fmt_type != fp->fmt_type)continue ; subs = &as->substream[stream]; -if (subs->endpoint) +if (subs->data_endpoint)continue ; err =snd_pcm_new_stream (as->pcm, stream,1 );if (err <0 )
Signature · 1 line
1.7.5.4
PATCH 4/5 ALSA: snd-usb: remove old streaming logic
In reply to Daniel Mack--- sound/usb/endpoint.c | 917 +++----------------------------------------------- sound/usb/endpoint.h | 15 - 2 files changed, 41 insertions(+), 891 deletions(-)
sound/usb/endpoint.c +41 -876
@@ -49,882 +49,6 @@ static inline unsigned get_usb_high_speed_rate(unsigned int rate)return ((rate <<10 ) +62 ) /125 ; } -/* -* unlink active urbs. -*/ -static int deactivate_urbs_old (struct snd_usb_substream *subs,int force,int can_sleep) -{ -struct snd_usb_audio *chip = subs->stream->chip; -unsigned int i; -int async; - - subs->running =0 ; - -if (!force && subs->stream->chip->shutdown)/* to be sure... */ -return -EBADFD ; - - async = !can_sleep && chip->async_unlink; - -if (!async &&in_interrupt ()) -return 0 ; - -for (i =0 ; i < subs->nurbs; i++) { -if (test_bit (i, &subs->active_mask)) { -if (!test_and_set_bit (i, &subs->unlink_mask)) { -struct urb *u = subs->dataurb[i].urb; -if (async) -usb_unlink_urb (u); -else -usb_kill_urb (u); - } - } - } -if (subs->syncpipe) { -for (i =0 ; i <SYNC_URBS ; i++) { -if (test_bit (i+16 , &subs->active_mask)) { -if (!test_and_set_bit (i+16 , &subs->unlink_mask)) { -struct urb *u = subs->syncurb[i].urb; -if (async) -usb_unlink_urb (u); -else -usb_kill_urb (u); - } - } - } - } -return 0 ; -} - - -/* -* release a urb data -*/ -static void release_urb_ctx (struct snd_urb_ctx *u) -{ -if (u->urb) { -if (u->buffer_size) -usb_free_coherent (u->subs->dev, u->buffer_size, - u->urb->transfer_buffer, - u->urb->transfer_dma); -usb_free_urb (u->urb); - u->urb =NULL ; - } -} - -/* -* wait until all urbs are processed. -*/ -static int wait_clear_urbs_old (struct snd_usb_substream *subs) -{ -unsigned long end_time = jiffies +msecs_to_jiffies (1000 ); -unsigned int i; -int alive; - -do { - alive =0 ; -for (i =0 ; i < subs->nurbs; i++) { -if (test_bit (i, &subs->active_mask)) - alive++; - } -if (subs->syncpipe) { -for (i =0 ; i <SYNC_URBS ; i++) { -if (test_bit (i +16 , &subs->active_mask)) - alive++; - } - } -if (! alive) -break ; -schedule_timeout_uninterruptible (1 ); - }while (time_before (jiffies, end_time)); -if (alive) -snd_printk (KERN_ERR "timeout: still %d active urbs..\n" , alive); -return 0 ; -} - -/* -* release a substream -*/ -void snd_usb_release_substream_urbs (struct snd_usb_substream *subs,int force) -{ -int i; - -/* stop urbs (to be sure) */ -deactivate_urbs_old (subs, force,1 ); -wait_clear_urbs_old (subs); - -for (i =0 ; i <MAX_URBS ; i++) -release_urb_ctx (&subs->dataurb[i]); -for (i =0 ; i <SYNC_URBS ; i++) -release_urb_ctx (&subs->syncurb[i]); -usb_free_coherent (subs->dev,SYNC_URBS *4 , - subs->syncbuf, subs->sync_dma); - subs->syncbuf =NULL ; - subs->nurbs =0 ; -} - -/* -* complete callback from data urb -*/ -static void snd_complete_urb_old (struct urb *urb) -{ -struct snd_urb_ctx *ctx = urb->context; -struct snd_usb_substream *subs = ctx->subs; -struct snd_pcm_substream *substream = ctx->subs->pcm_substream; -int err =0 ; - -if ((subs->running && subs->ops.retire (subs, substream->runtime, urb)) || - !subs->running ||/* can be stopped during retire callback */ - (err = subs->ops.prepare (subs, substream->runtime, urb)) <0 || - (err =usb_submit_urb (urb,GFP_ATOMIC )) <0 ) { -clear_bit (ctx->index, &subs->active_mask); -if (err <0 ) { -snd_printd (KERN_ERR "cannot submit urb (err = %d)\n" , err); -snd_pcm_stop (substream,SNDRV_PCM_STATE_XRUN ); - } - } -} - - -/* -* complete callback from sync urb -*/ -static void snd_complete_sync_urb (struct urb *urb) -{ -struct snd_urb_ctx *ctx = urb->context; -struct snd_usb_substream *subs = ctx->subs; -struct snd_pcm_substream *substream = ctx->subs->pcm_substream; -int err =0 ; - -if ((subs->running && subs->ops.retire_sync (subs, substream->runtime, urb)) || - !subs->running ||/* can be stopped during retire callback */ - (err = subs->ops.prepare_sync (subs, substream->runtime, urb)) <0 || - (err =usb_submit_urb (urb,GFP_ATOMIC )) <0 ) { -clear_bit (ctx->index +16 , &subs->active_mask); -if (err <0 ) { -snd_printd (KERN_ERR "cannot submit sync urb (err = %d)\n" , err); -snd_pcm_stop (substream,SNDRV_PCM_STATE_XRUN ); - } - } -} - - -/* -* initialize a substream for plaback/capture -*/ -int snd_usb_init_substream_urbs (struct snd_usb_substream *subs, -unsigned int period_bytes, -unsigned int rate, -unsigned int frame_bits) -{ -unsigned int maxsize, i; -int is_playback = subs->direction ==SNDRV_PCM_STREAM_PLAYBACK ; -unsigned int urb_packs, total_packs, packs_per_ms; -struct snd_usb_audio *chip = subs->stream->chip; - -/* calculate the frequency in 16.16 format */ -if (snd_usb_get_speed (subs->dev) ==USB_SPEED_FULL ) - subs->freqn =get_usb_full_speed_rate (rate); -else - subs->freqn =get_usb_high_speed_rate (rate); - subs->freqm = subs->freqn; - subs->freqshift =INT_MIN ; -/* calculate max. frequency */ -if (subs->maxpacksize) { -/* whatever fits into a max. size packet */ - maxsize = subs->maxpacksize; - subs->freqmax = (maxsize / (frame_bits >>3 )) - << (16 - subs->datainterval); - }else { -/* no max. packet size: just take 25% higher than nominal */ - subs->freqmax = subs->freqn + (subs->freqn >>2 ); - maxsize = ((subs->freqmax +0xffff ) * (frame_bits >>3 )) - >> (16 - subs->datainterval); - } - subs->phase =0 ; - -if (subs->fill_max) - subs->curpacksize = subs->maxpacksize; -else - subs->curpacksize = maxsize; - -if (snd_usb_get_speed (subs->dev) !=USB_SPEED_FULL ) - packs_per_ms =8 >> subs->datainterval; -else - packs_per_ms =1 ; - -if (is_playback) { - urb_packs =max (chip->nrpacks,1 ); - urb_packs =min (urb_packs, (unsigned int )MAX_PACKS ); - }else - urb_packs =1 ; - urb_packs *= packs_per_ms; -if (subs->syncpipe) - urb_packs =min (urb_packs,1U << subs->syncinterval); - -/* decide how many packets to be used */ -if (is_playback) { -unsigned int minsize, maxpacks; -/* determine how small a packet can be */ - minsize = (subs->freqn >> (16 - subs->datainterval)) - * (frame_bits >>3 ); -/* with sync from device, assume it can be 12% lower */ -if (subs->syncpipe) - minsize -= minsize >>3 ; - minsize =max (minsize,1u ); - total_packs = (period_bytes + minsize -1 ) / minsize; -/* we need at least two URBs for queueing */ -if (total_packs <2 ) { - total_packs =2 ; - }else { -/* and we don't want too long a queue either */ - maxpacks =max (MAX_QUEUE * packs_per_ms, urb_packs *2 ); - total_packs =min (total_packs, maxpacks); - } - }else { -while (urb_packs >1 && urb_packs * maxsize >= period_bytes) - urb_packs >>=1 ; - total_packs =MAX_URBS * urb_packs; - } - subs->nurbs = (total_packs + urb_packs -1 ) / urb_packs; -if (subs->nurbs >MAX_URBS ) { -/* too much... */ - subs->nurbs =MAX_URBS ; - total_packs =MAX_URBS * urb_packs; - }else if (subs->nurbs <2 ) { -/* too little - we need at least two packets -* to ensure contiguous playback/capture -*/ - subs->nurbs =2 ; - } - -/* allocate and initialize data urbs */ -for (i =0 ; i < subs->nurbs; i++) { -struct snd_urb_ctx *u = &subs->dataurb[i]; - u->index = i; - u->subs = subs; - u->packets = (i +1 ) * total_packs / subs->nurbs - - i * total_packs / subs->nurbs; - u->buffer_size = maxsize * u->packets; -if (subs->fmt_type ==UAC_FORMAT_TYPE_II ) - u->packets++;/* for transfer delimiter */ - u->urb =usb_alloc_urb (u->packets,GFP_KERNEL ); -if (!u->urb) - goto out_of_memory; - u->urb->transfer_buffer = -usb_alloc_coherent (subs->dev, u->buffer_size, -GFP_KERNEL , &u->urb->transfer_dma); -if (!u->urb->transfer_buffer) - goto out_of_memory; - u->urb->pipe = subs->datapipe; - u->urb->transfer_flags =URB_ISO_ASAP |URB_NO_TRANSFER_DMA_MAP ; - u->urb->interval =1 << subs->datainterval; - u->urb->context = u; - u->urb->complete = snd_complete_urb_old; - } - -if (subs->syncpipe) { -/* allocate and initialize sync urbs */ - subs->syncbuf =usb_alloc_coherent (subs->dev,SYNC_URBS *4 , -GFP_KERNEL , &subs->sync_dma); -if (!subs->syncbuf) - goto out_of_memory; -for (i =0 ; i <SYNC_URBS ; i++) { -struct snd_urb_ctx *u = &subs->syncurb[i]; - u->index = i; - u->subs = subs; - u->packets =1 ; - u->urb =usb_alloc_urb (1 ,GFP_KERNEL ); -if (!u->urb) - goto out_of_memory; - u->urb->transfer_buffer = subs->syncbuf + i *4 ; - u->urb->transfer_dma = subs->sync_dma + i *4 ; - u->urb->transfer_buffer_length =4 ; - u->urb->pipe = subs->syncpipe; - u->urb->transfer_flags =URB_ISO_ASAP | -URB_NO_TRANSFER_DMA_MAP ; - u->urb->number_of_packets =1 ; - u->urb->interval =1 << subs->syncinterval; - u->urb->context = u; - u->urb->complete = snd_complete_sync_urb; - } - } -return 0 ; - -out_of_memory: -snd_usb_release_substream_urbs (subs,0 ); -return -ENOMEM ; -} - -/* -* prepare urb for full speed capture sync pipe -* -* fill the length and offset of each urb descriptor. -* the fixed 10.14 frequency is passed through the pipe. -*/ -static int prepare_capture_sync_urb (struct snd_usb_substream *subs, -struct snd_pcm_runtime *runtime, -struct urb *urb) -{ -unsigned char *cp = urb->transfer_buffer; -struct snd_urb_ctx *ctx = urb->context; - - urb->dev = ctx->subs->dev;/* we need to set this at each time */ - urb->iso_frame_desc[0 ].length =3 ; - urb->iso_frame_desc[0 ].offset =0 ; - cp[0 ] = subs->freqn >>2 ; - cp[1 ] = subs->freqn >>10 ; - cp[2 ] = subs->freqn >>18 ; -return 0 ; -} - -/* -* prepare urb for high speed capture sync pipe -* -* fill the length and offset of each urb descriptor. -* the fixed 12.13 frequency is passed as 16.16 through the pipe. -*/ -static int prepare_capture_sync_urb_hs (struct snd_usb_substream *subs, -struct snd_pcm_runtime *runtime, -struct urb *urb) -{ -unsigned char *cp = urb->transfer_buffer; -struct snd_urb_ctx *ctx = urb->context; - - urb->dev = ctx->subs->dev;/* we need to set this at each time */ - urb->iso_frame_desc[0 ].length =4 ; - urb->iso_frame_desc[0 ].offset =0 ; - cp[0 ] = subs->freqn; - cp[1 ] = subs->freqn >>8 ; - cp[2 ] = subs->freqn >>16 ; - cp[3 ] = subs->freqn >>24 ; -return 0 ; -} - -/* -* process after capture sync complete -* - nothing to do -*/ -static int retire_capture_sync_urb (struct snd_usb_substream *subs, -struct snd_pcm_runtime *runtime, -struct urb *urb) -{ -return 0 ; -} - -/* -* prepare urb for capture data pipe -* -* fill the offset and length of each descriptor. -* -* we use a temporary buffer to write the captured data. -* since the length of written data is determined by host, we cannot -* write onto the pcm buffer directly... the data is thus copied -* later at complete callback to the global buffer. -*/ -static int prepare_capture_urb (struct snd_usb_substream *subs, -struct snd_pcm_runtime *runtime, -struct urb *urb) -{ -int i, offs; -struct snd_urb_ctx *ctx = urb->context; - - offs =0 ; - urb->dev = ctx->subs->dev;/* we need to set this at each time */ -for (i =0 ; i < ctx->packets; i++) { - urb->iso_frame_desc[i].offset = offs; - urb->iso_frame_desc[i].length = subs->curpacksize; - offs += subs->curpacksize; - } - urb->transfer_buffer_length = offs; - urb->number_of_packets = ctx->packets; -return 0 ; -} - -/* -* process after capture complete -* -* copy the data from each desctiptor to the pcm buffer, and -* update the current position. -*/ -static int retire_capture_urb (struct snd_usb_substream *subs, -struct snd_pcm_runtime *runtime, -struct urb *urb) -{ -unsigned long flags; -unsigned char *cp; -int i; -unsigned int stride, frames, bytes, oldptr; -int period_elapsed =0 ; - - stride = runtime->frame_bits >>3 ; - -for (i =0 ; i < urb->number_of_packets; i++) { - cp = (unsigned char *)urb->transfer_buffer + urb->iso_frame_desc[i].offset; -if (urb->iso_frame_desc[i].status) { -snd_printd (KERN_ERR "frame %d active: %d\n" , i, urb->iso_frame_desc[i].status); -// continue; - } - bytes = urb->iso_frame_desc[i].actual_length; - frames = bytes / stride; -if (!subs->txfr_quirk) - bytes = frames * stride; -if (bytes % (runtime->sample_bits >>3 ) !=0 ) { -#ifdef CONFIG_SND_DEBUG_VERBOSE -int oldbytes = bytes; -#endif - bytes = frames * stride; -snd_printdd (KERN_ERR "Corrected urb data len. %d->%d\n" , - oldbytes, bytes); - } -/* update the current pointer */ -spin_lock_irqsave (&subs->lock, flags); - oldptr = subs->hwptr_done; - subs->hwptr_done += bytes; -if (subs->hwptr_done >= runtime->buffer_size * stride) - subs->hwptr_done -= runtime->buffer_size * stride; - frames = (bytes + (oldptr % stride)) / stride; - subs->transfer_done += frames; -if (subs->transfer_done >= runtime->period_size) { - subs->transfer_done -= runtime->period_size; - period_elapsed =1 ; - } -spin_unlock_irqrestore (&subs->lock, flags); -/* copy a data chunk */ -if (oldptr + bytes > runtime->buffer_size * stride) { -unsigned int bytes1 = - runtime->buffer_size * stride - oldptr; -memcpy (runtime->dma_area + oldptr, cp, bytes1); -memcpy (runtime->dma_area, cp + bytes1, bytes - bytes1); - }else { -memcpy (runtime->dma_area + oldptr, cp, bytes); - } - } -if (period_elapsed) -snd_pcm_period_elapsed (subs->pcm_substream); -return 0 ; -} - -/* -* Process after capture complete when paused. Nothing to do. -*/ -static int retire_paused_capture_urb (struct snd_usb_substream *subs, -struct snd_pcm_runtime *runtime, -struct urb *urb) -{ -return 0 ; -} - - -/* -* prepare urb for playback sync pipe -* -* set up the offset and length to receive the current frequency. -*/ -static int prepare_playback_sync_urb (struct snd_usb_substream *subs, -struct snd_pcm_runtime *runtime, -struct urb *urb) -{ -struct snd_urb_ctx *ctx = urb->context; - - urb->dev = ctx->subs->dev;/* we need to set this at each time */ - urb->iso_frame_desc[0 ].length =min (4u , ctx->subs->syncmaxsize); - urb->iso_frame_desc[0 ].offset =0 ; -return 0 ; -} - -/* -* process after playback sync complete -* -* Full speed devices report feedback values in 10.14 format as samples per -* frame, high speed devices in 16.16 format as samples per microframe. -* Because the Audio Class 1 spec was written before USB 2.0, many high speed -* devices use a wrong interpretation, some others use an entirely different -* format. Therefore, we cannot predict what format any particular device uses -* and must detect it automatically. -*/ -static int retire_playback_sync_urb (struct snd_usb_substream *subs, -struct snd_pcm_runtime *runtime, -struct urb *urb) -{ -unsigned int f; -int shift; -unsigned long flags; - -if (urb->iso_frame_desc[0 ].status !=0 || - urb->iso_frame_desc[0 ].actual_length <3 ) -return 0 ; - - f =le32_to_cpup (urb->transfer_buffer); -if (urb->iso_frame_desc[0 ].actual_length ==3 ) - f &=0x00ffffff ; -else - f &=0x0fffffff ; -if (f ==0 ) -return 0 ; - -if (unlikely (subs->freqshift ==INT_MIN )) { -/* -* The first time we see a feedback value, determine its format -* by shifting it left or right until it matches the nominal -* frequency value. This assumes that the feedback does not -* differ from the nominal value more than +50% or -25%. -*/ - shift =0 ; -while (f < subs->freqn - subs->freqn /4 ) { - f <<=1 ; - shift++; - } -while (f > subs->freqn + subs->freqn /2 ) { - f >>=1 ; - shift--; - } - subs->freqshift = shift; - } -else if (subs->freqshift >=0 ) - f <<= subs->freqshift; -else - f >>= -subs->freqshift; - -if (likely (f >= subs->freqn - subs->freqn /8 && f <= subs->freqmax)) { -/* -* If the frequency looks valid, set it. -* This value is referred to in prepare_playback_urb(). -*/ -spin_lock_irqsave (&subs->lock, flags); - subs->freqm = f; -spin_unlock_irqrestore (&subs->lock, flags); - }else { -/* -* Out of range; maybe the shift value is wrong. -* Reset it so that we autodetect again the next time. -*/ - subs->freqshift =INT_MIN ; - } - -return 0 ; -} - -/* determine the number of frames in the next packet */ -static int snd_usb_audio_next_packet_size (struct snd_usb_substream *subs) -{ -if (subs->fill_max) -return subs->maxframesize; -else { - subs->phase = (subs->phase &0xffff ) - + (subs->freqm << subs->datainterval); -return min (subs->phase >>16 , subs->maxframesize); - } -} - -/* -* Prepare urb for streaming before playback starts or when paused. -* -* We don't have any data, so we send silence. -*/ -static int prepare_nodata_playback_urb (struct snd_usb_substream *subs, -struct snd_pcm_runtime *runtime, -struct urb *urb) -{ -unsigned int i, offs, counts; -struct snd_urb_ctx *ctx = urb->context; -int stride = runtime->frame_bits >>3 ; - - offs =0 ; - urb->dev = ctx->subs->dev; -for (i =0 ; i < ctx->packets; ++i) { - counts =snd_usb_audio_next_packet_size (subs); - urb->iso_frame_desc[i].offset = offs * stride; - urb->iso_frame_desc[i].length = counts * stride; - offs += counts; - } - urb->number_of_packets = ctx->packets; - urb->transfer_buffer_length = offs * stride; -memset (urb->transfer_buffer, - runtime->format ==SNDRV_PCM_FORMAT_U8 ?0x80 :0 , - offs * stride); -return 0 ; -} - -/* -* prepare urb for playback data pipe -* -* Since a URB can handle only a single linear buffer, we must use double -* buffering when the data to be transferred overflows the buffer boundary. -* To avoid inconsistencies when updating hwptr_done, we use double buffering -* for all URBs. -*/ -static int prepare_playback_urb (struct snd_usb_substream *subs, -struct snd_pcm_runtime *runtime, -struct urb *urb) -{ -int i, stride; -unsigned int counts, frames, bytes; -unsigned long flags; -int period_elapsed =0 ; -struct snd_urb_ctx *ctx = urb->context; - - stride = runtime->frame_bits >>3 ; - - frames =0 ; - urb->dev = ctx->subs->dev;/* we need to set this at each time */ - urb->number_of_packets =0 ; -spin_lock_irqsave (&subs->lock, flags); -for (i =0 ; i < ctx->packets; i++) { - counts =snd_usb_audio_next_packet_size (subs); -/* set up descriptor */ - urb->iso_frame_desc[i].offset = frames * stride; - urb->iso_frame_desc[i].length = counts * stride; - frames += counts; - urb->number_of_packets++; - subs->transfer_done += counts; -if (subs->transfer_done >= runtime->period_size) { - subs->transfer_done -= runtime->period_size; - period_elapsed =1 ; -if (subs->fmt_type ==UAC_FORMAT_TYPE_II ) { -if (subs->transfer_done >0 ) { -/* FIXME: fill-max mode is not -* supported yet */ - frames -= subs->transfer_done; - counts -= subs->transfer_done; - urb->iso_frame_desc[i].length = - counts * stride; - subs->transfer_done =0 ; - } - i++; -if (i < ctx->packets) { -/* add a transfer delimiter */ - urb->iso_frame_desc[i].offset = - frames * stride; - urb->iso_frame_desc[i].length =0 ; - urb->number_of_packets++; - } -break ; - } - } -if (period_elapsed)/* finish at the period boundary */ -break ; - } - bytes = frames * stride; -if (subs->hwptr_done + bytes > runtime->buffer_size * stride) { -/* err, the transferred area goes over buffer boundary. */ -unsigned int bytes1 = - runtime->buffer_size * stride - subs->hwptr_done; -memcpy (urb->transfer_buffer, - runtime->dma_area + subs->hwptr_done, bytes1); -memcpy (urb->transfer_buffer + bytes1, - runtime->dma_area, bytes - bytes1); - }else { -memcpy (urb->transfer_buffer, - runtime->dma_area + subs->hwptr_done, bytes); - } - subs->hwptr_done += bytes; -if (subs->hwptr_done >= runtime->buffer_size * stride) - subs->hwptr_done -= runtime->buffer_size * stride; - -/* update delay with exact number of samples queued */ - runtime->delay = subs->last_delay; - runtime->delay += frames; - subs->last_delay = runtime->delay; - -/* realign last_frame_number */ - subs->last_frame_number =usb_get_current_frame_number (subs->dev); - subs->last_frame_number &=0xFF ;/* keep 8 LSBs */ - -spin_unlock_irqrestore (&subs->lock, flags); - urb->transfer_buffer_length = bytes; -if (period_elapsed) -snd_pcm_period_elapsed (subs->pcm_substream); -return 0 ; -} - -/* -* process after playback data complete -* - decrease the delay count again -*/ -static int retire_playback_urb (struct snd_usb_substream *subs, -struct snd_pcm_runtime *runtime, -struct urb *urb) -{ -unsigned long flags; -int stride = runtime->frame_bits >>3 ; -int processed = urb->transfer_buffer_length / stride; -int est_delay; - -spin_lock_irqsave (&subs->lock, flags); - - est_delay =snd_usb_pcm_delay (subs, runtime->rate); -/* update delay with exact number of samples played */ -if (processed > subs->last_delay) - subs->last_delay =0 ; -else - subs->last_delay -= processed; - runtime->delay = subs->last_delay; - -/* -* Report when delay estimate is off by more than 2ms. -* The error should be lower than 2ms since the estimate relies -* on two reads of a counter updated every ms. -*/ -if (abs (est_delay - subs->last_delay) *1000 > runtime->rate *2 ) -snd_printk (KERN_DEBUG "delay: estimated %d, actual %d\n" , - est_delay, subs->last_delay); - -spin_unlock_irqrestore (&subs->lock, flags); -return 0 ; -} - -static const char *usb_error_string (int err) -{ -switch (err) { -case -ENODEV : -return "no device" ; -case -ENOENT : -return "endpoint not enabled" ; -case -EPIPE : -return "endpoint stalled" ; -case -ENOSPC : -return "not enough bandwidth" ; -case -ESHUTDOWN : -return "device disabled" ; -case -EHOSTUNREACH : -return "device suspended" ; -case -EINVAL : -case -EAGAIN : -case -EFBIG : -case -EMSGSIZE : -return "internal error" ; -default : -return "unknown error" ; - } -} - -/* -* set up and start data/sync urbs -*/ -static int start_urbs (struct snd_usb_substream *subs,struct snd_pcm_runtime *runtime) -{ -unsigned int i; -int err; - -if (subs->stream->chip->shutdown) -return -EBADFD ; - -for (i =0 ; i < subs->nurbs; i++) { -if (snd_BUG_ON (!subs->dataurb[i].urb)) -return -EINVAL ; -if (subs->ops.prepare (subs, runtime, subs->dataurb[i].urb) <0 ) { -snd_printk (KERN_ERR "cannot prepare datapipe for urb %d\n" , i); - goto __error; - } - } -if (subs->syncpipe) { -for (i =0 ; i <SYNC_URBS ; i++) { -if (snd_BUG_ON (!subs->syncurb[i].urb)) -return -EINVAL ; -if (subs->ops.prepare_sync (subs, runtime, subs->syncurb[i].urb) <0 ) { -snd_printk (KERN_ERR "cannot prepare syncpipe for urb %d\n" , i); - goto __error; - } - } - } - - subs->active_mask =0 ; - subs->unlink_mask =0 ; - subs->running =1 ; -for (i =0 ; i < subs->nurbs; i++) { - err =usb_submit_urb (subs->dataurb[i].urb,GFP_ATOMIC ); -if (err <0 ) { -snd_printk (KERN_ERR "cannot submit datapipe " -"for urb %d, error %d: %s\n" , - i, err,usb_error_string (err)); - goto __error; - } -set_bit (i, &subs->active_mask); - } -if (subs->syncpipe) { -for (i =0 ; i <SYNC_URBS ; i++) { - err =usb_submit_urb (subs->syncurb[i].urb,GFP_ATOMIC ); -if (err <0 ) { -snd_printk (KERN_ERR "cannot submit syncpipe " -"for urb %d, error %d: %s\n" , - i, err,usb_error_string (err)); - goto __error; - } -set_bit (i +16 , &subs->active_mask); - } - } -return 0 ; - - __error: -// snd_pcm_stop(subs->pcm_substream, SNDRV_PCM_STATE_XRUN); -deactivate_urbs_old (subs,0 ,0 ); -return -EPIPE ; -} - - -/* -*/ -static struct snd_urb_ops audio_urb_ops[2 ] = { - { - .prepare = prepare_nodata_playback_urb, - .retire = retire_playback_urb, - .prepare_sync = prepare_playback_sync_urb, - .retire_sync = retire_playback_sync_urb, - }, - { - .prepare = prepare_capture_urb, - .retire = retire_capture_urb, - .prepare_sync = prepare_capture_sync_urb, - .retire_sync = retire_capture_sync_urb, - }, -}; - -/* -* initialize the substream instance. -*/ - -void snd_usb_init_substream (struct snd_usb_stream *as, -int stream,struct audioformat *fp) -{ -struct snd_usb_substream *subs = &as->substream[stream]; - -INIT_LIST_HEAD (&subs->fmt_list); -spin_lock_init (&subs->lock); - - subs->stream = as; - subs->direction = stream; - subs->dev = as->chip->dev; - subs->txfr_quirk = as->chip->txfr_quirk; - subs->ops = audio_urb_ops[stream]; -if (snd_usb_get_speed (subs->dev) >=USB_SPEED_HIGH ) - subs->ops.prepare_sync = prepare_capture_sync_urb_hs; - -snd_usb_set_pcm_ops (as->pcm, stream); - -list_add_tail (&fp->list, &subs->fmt_list); - subs->formats |= fp->formats; - subs->endpoint = fp->endpoint; - subs->num_formats++; - subs->fmt_type = fp->fmt_type; -} - -int snd_usb_substream_prepare (struct snd_usb_substream *subs, -struct snd_pcm_runtime *runtime) -{ -/* clear urbs (to be sure) */ -deactivate_urbs_old (subs,0 ,1 ); -wait_clear_urbs_old (subs); - -/* for playback, submit the URBs now; otherwise, the first hwptr_done -* updates for all URBs would happen at the same time when starting */ -if (subs->direction ==SNDRV_PCM_STREAM_PLAYBACK ) { - subs->ops.prepare = prepare_nodata_playback_urb; -return start_urbs (subs, runtime); - } - -return 0 ; -} -int snd_usb_endpoint_implict_feedback_sink (struct snd_usb_endpoint *ep) { return ep->sync_master &&
@@ -1243,6 +367,47 @@ __exit_unlock:return ep; } +static const char *usb_error_string (int err) +{ +switch (err) { +case -ENODEV : +return "no device" ; +case -ENOENT : +return "endpoint not enabled" ; +case -EPIPE : +return "endpoint stalled" ; +case -ENOSPC : +return "not enough bandwidth" ; +case -ESHUTDOWN : +return "device disabled" ; +case -EHOSTUNREACH : +return "device suspended" ; +case -EINVAL : +case -EAGAIN : +case -EFBIG : +case -EMSGSIZE : +return "internal error" ; +default : +return "unknown error" ; + } +} + +/* +* release a urb data +*/ +static void release_urb_ctx (struct snd_urb_ctx *u) +{ +if (!u->urb) +return ; + +if (u->buffer_size) +usb_free_coherent (u->ep->chip->dev, u->buffer_size, + u->urb->transfer_buffer, + u->urb->transfer_dma); +usb_free_urb (u->urb); + u->urb =NULL ; +} +/* * wait until all urbs are processed. */
sound/usb/endpoint.h +0 -15
@@ -1,21 +1,6 @@#ifndef __USBAUDIO_ENDPOINT_H#define __USBAUDIO_ENDPOINT_H -void snd_usb_init_substream (struct snd_usb_stream *as, -int stream, -struct audioformat *fp); - -int snd_usb_init_substream_urbs (struct snd_usb_substream *subs, -unsigned int period_bytes, -unsigned int rate, -unsigned int frame_bits); - -void snd_usb_release_substream_urbs (struct snd_usb_substream *subs,int force); - -int snd_usb_substream_prepare (struct snd_usb_substream *subs, -struct snd_pcm_runtime *runtime); - -#define SND_USB_ENDPOINT_TYPE_DATA 0#define SND_USB_ENDPOINT_TYPE_SYNC 1
Signature · 1 line
1.7.5.4
PATCH 5/5 ALSA: snd-usb: add support for implicit feedback
In reply to Daniel MackImplicit feedback is a streaming mode that does not rely on dedicated sync endpoints but uses the information provided by record streams to clock output streams. Now that the streaming logic is decoupled from the PCM streams, this is easy to implement.
--- sound/usb/pcm.c | 37 ++++++++++++++++++++++++++----------- 1 files changed, 26 insertions(+), 11 deletions(-)
sound/usb/pcm.c +26 -11
@@ -294,7 +294,7 @@ static int set_format(struct snd_usb_substream *subs, struct audioformat *fmt)struct usb_interface *iface;unsigned int ep, attr;int is_playback = subs->direction ==SNDRV_PCM_STREAM_PLAYBACK ; -int err; +int err, implicit_fb =0 ; iface =usb_ifnum_to_if (dev, fmt->iface);if (WARN_ON (!iface))
@@ -319,25 +319,34 @@ static int set_format(struct snd_usb_substream *subs, struct audioformat *fmt)* assume it as adaptive-out or sync-in. */ attr = fmt->ep_attr &USB_ENDPOINT_SYNCTYPE ; -if (((is_playback && attr ==USB_ENDPOINT_SYNC_ASYNC ) || - (! is_playback && attr ==USB_ENDPOINT_SYNC_ADAPTIVE )) && - altsd->bNumEndpoints >=2 ) { -switch (subs->stream->chip->usb_id) { -case USB_ID (0x0763 ,0x2080 ):/* M-Audio FastTrack Ultra */ -case USB_ID (0x0763 ,0x2081 ): + +switch (subs->stream->chip->usb_id) { +case USB_ID (0x0763 ,0x2080 ):/* M-Audio FastTrack Ultra */ +case USB_ID (0x0763 ,0x2081 ): +if (is_playback) { + implicit_fb =1 ; ep =0x81 ; iface =usb_ifnum_to_if (dev,2 ); + +if (!iface || iface->num_altsetting ==0 ) +return -EINVAL ; + alts = &iface->altsetting[1 ]; goto add_sync_ep; } + } +if (((is_playback && attr ==USB_ENDPOINT_SYNC_ASYNC ) || + (! is_playback && attr ==USB_ENDPOINT_SYNC_ADAPTIVE )) && + altsd->bNumEndpoints >=2 ) {/* check sync-pipe endpoint */ /* ... and check descriptor size before accessing bSynchAddress because there is a version of the SB Audigy 2 NX firmware lacking the audio fields in the endpoint descriptors */ if ((get_endpoint (alts,1 )->bmAttributes &USB_ENDPOINT_XFERTYPE_MASK ) !=0x01 || (get_endpoint (alts,1 )->bLength >=USB_DT_ENDPOINT_AUDIO_SIZE && -get_endpoint (alts,1 )->bSynchAddress !=0 )) { +get_endpoint (alts,1 )->bSynchAddress !=0 && + !implicit_fb)) {snd_printk (KERN_ERR "%d:%d:%d : invalid synch pipe\n" , dev->devnum, fmt->iface, fmt->altsetting);return -EINVAL ;
@@ -345,16 +354,22 @@ static int set_format(struct snd_usb_substream *subs, struct audioformat *fmt) ep =get_endpoint (alts,1 )->bEndpointAddress;if (get_endpoint (alts,0 )->bLength >=USB_DT_ENDPOINT_AUDIO_SIZE && (( is_playback && ep != (unsigned int )(get_endpoint (alts,0 )->bSynchAddress |USB_DIR_IN )) || - (!is_playback && ep != (unsigned int )(get_endpoint (alts,0 )->bSynchAddress & ~USB_DIR_IN )))) { + (!is_playback && ep != (unsigned int )(get_endpoint (alts,0 )->bSynchAddress & ~USB_DIR_IN )) || + ( is_playback && !implicit_fb))) {snd_printk (KERN_ERR "%d:%d:%d : invalid synch pipe\n" , dev->devnum, fmt->iface, fmt->altsetting);return -EINVAL ; } + + implicit_fb = (get_endpoint (alts,1 )->bmAttributes &USB_ENDPOINT_USAGE_MASK ) + ==USB_ENDPOINT_USAGE_IMPLICIT_FB ; + add_sync_ep: subs->sync_endpoint =snd_usb_add_endpoint (subs->stream->chip, alts, ep, !subs->direction, -SND_USB_ENDPOINT_TYPE_SYNC ); - + implicit_fb ? +SND_USB_ENDPOINT_TYPE_DATA : +SND_USB_ENDPOINT_TYPE_SYNC );if (!subs->sync_endpoint)return -EINVAL ;
Signature · 1 line
1.7.5.4
Quoted 10 lines · Daniel Mack
This is the 3rd round, and I didn't mark it RFC anymore as Clemens and Takashi agreed on the way of implementation in general.
So in comparison to the last version, this round incorporates some spinlock fixes, a lot less debugging output and my S-o-b lines.
Please test this extensively with different sound cards.
I didn't experience a single problem over the last hours of testing, but the more testing the better.
Gna. Shortly after I wrote this, I got a deadlock, and I also found a way to reproduce it. I've been looking at it for awhile now, but I don't see it. Hang on, I need to respin this again. Sorry.
Daniel