i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board
PATCH v4 1/1 i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board
From: Jason Liu <[email protected]>
Add the initial support for Freescale i.MX6Q Sabre Lite board
---
V4: Rebase board_mmc_getcd() against
http://patchwork.ozlabs.org/patch/132398/
This does mean that this patch needs that patch to be applied.
V3: Add a readme.
Enable the usboh3 clock: Bits 0 and 1 of CCM_CCGR7 are the usboh3 clock enable bits. Enabling this clock is necessary for the USB download:
-DATA 4 0x020c4080 0x000003FC
+DATA 4 0x020c4080 0x000003FF
V2: change the default script to let linaro image boot, and also
change the default env to dev 0, which is normal SD slot, not the Micro-SD slot
MAINTAINERS | 1 board/freescale/mx6qsabrelite/Makefile | 42 ++++++ board/freescale/mx6qsabrelite/imximage.cfg | 170 ++++++++++++++++++++++++++ board/freescale/mx6qsabrelite/mx6qsabrelite.c | 151 +++++++++++++++++++++++ boards.cfg | 1 doc/README.mx6qsabrelite | 67 ++++++++++ include/configs/mx6qsabrelite.h | 162 ++++++++++++++++++++++++ 7 files changed, 594 insertions(+) create mode 100644 board/freescale/mx6qsabrelite/Makefile create mode 100644 board/freescale/mx6qsabrelite/imximage.cfg create mode 100644 board/freescale/mx6qsabrelite/mx6qsabrelite.c create mode 100644 include/configs/mx6qsabrelite.h
MAINTAINERS +1 -0
@@ -579,6 +579,7 @@ Jason Liu <[email protected]> mx53evk i.MX53 mx53loco i.MX53 mx6qarm2 i.MX6Q + mx6qsabrelite i.MX6Q Enric Balletbo i Serra <[email protected]>
board/freescale/mx6qsabrelite/Makefile new file +42 -0
42 lines not on this page · raw message
board/freescale/mx6qsabrelite/imximage.cfg new file +170 -0
170 lines not on this page · raw message
board/freescale/mx6qsabrelite/mx6qsabrelite.c new file +151 -0
151 lines not on this page · raw message
boards.cfg +1 -0
@@ -193,6 +193,7 @@ mx53loco arm mx53smd arm armv7 mx53smd freescale mx5 mx53smd:IMX_CONFIG=board/freescale/mx53smd/imximage.cfg vision2 arm armv7 vision2 ttcontrol mx5 vision2:IMX_CONFIG=board/ttcontrol/vision2/imximage_hynix.cfg mx6qarm2 arm armv7 mx6qarm2 freescale mx6 mx6qarm2:IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg +mx6qsabrelite arm armv7 mx6qsabrelite freescale mx6 mx6qsabrelite:IMX_CONFIG=board/freescale/mx6qsabrelite/imximage.cfg cm_t35 arm armv7 cm_t35 - omap3 omap3_overo arm armv7 overo - omap3 omap3_pandora arm armv7 pandora - omap3
include/configs/mx6qsabrelite.h new file +162 -0
162 lines not on this page · raw message
doc/README.mx6qsabrelite new file +67 -0
67 lines not on this page · raw message
PATCH v4 1/1 i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board
Hi Stefano,
Quoted 11 lines · Dirk Behme
From: Jason Liu <[email protected]>
Add the initial support for Freescale i.MX6Q Sabre Lite board
Signed-off-by Dirk Behme <[email protected]>Signed-off-by Jason Liu <[email protected]>CC Eric Nelson <[email protected]>---
V4: Rebaseboard_mmc_getcd()against
http://patchwork.ozlabs.org/patch/132398/
This does mean that this patch needs that patch to be applied.
The 'Change board_mmc_getcd() function prototype' patch is applied now:
http://git.denx.de/?p=u-boot/u-boot-mmc.git;a=shortlog;h=refs/heads/master
Can we go on and apply this patch [1] then, too?
Best regards
Dirk
PATCH v4 1/1 i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board
Quoted 15 lines · Dirk Behme
Hi Stefano,
Quoted 11 lines · Dirk Behme
From: Jason Liu <[email protected]>
Add the initial support for Freescale i.MX6Q Sabre Lite board
Signed-off-by Dirk Behme <[email protected]>Signed-off-by Jason Liu <[email protected]>CC Eric Nelson <[email protected]>---
V4: Rebaseboard_mmc_getcd()against
http://patchwork.ozlabs.org/patch/132398/
This does mean that this patch needs that patch to be applied.
Quoted 5 lines
The 'Change
board_mmc_getcd()function prototype' patch is applied now:http://git.denx.de/?p=u-boot/u-boot-mmc.git;a=shortlog;h=refs/heads/master
Can we go on and apply this patch [1] then, too?
Yes, now it is possible to merge your patch !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================
PATCH v4 1/1 i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board
In reply to Dirk BehmeQuoted 8 lines · Dirk Behme
From: Jason Liu <[email protected]>
Add the initial support for Freescale i.MX6Q Sabre Lite board
Signed-off-by Dirk Behme <[email protected]>Signed-off-by Jason Liu <[email protected]>CC Eric Nelson <[email protected]>---
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================