arm/dts: omap3-evm: Add i2c and twl4030 support
PATCH 1/1 arm/dts: omap3-evm: Add i2c and twl4030 support
Add support for TWL4030, which is interfaced on i2c1 bus. Also add clock frequencies for other i2c instances(2 & 3) required for client-device exist on OMAP3EVM board.
--- arch/arm/boot/dts/omap3-evm.dts | 28 ++++++++++++++++++++++++++++ 1 files changed, 28 insertions(+), 0 deletions(-)
arch/arm/boot/dts/omap3-evm.dts +28 -0
@@ -18,3 +18,31 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; }; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl at 48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +/include/ "twl4030.dtsi" + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <400000>; + + /* + * TVP5146 Video decoder-in for analog input support. + */ + tvp5146 at 5C { + compatible = "ti,tvp5146m2"; + reg = <0x5C>; + }; +};
Signature · 1 line
1.7.0.4
PATCH 1/1 arm/dts: omap3-evm: Add i2c and twl4030 support
Quoted 52 lines · Vaibhav
Add support for TWL4030, which is interfaced on i2c1 bus. Also add clock frequencies for other i2c
instances(2 & 3)required for client-device exist on OMAP3EVM board.Signed-off-by Vaibhav Hiremath <[email protected]>Cc Benoit Cousson <[email protected]>Cc Grant Likely <[email protected]>Cc Tony Lindgren <[email protected]>--- arch/arm/boot/dts/omap3-evm.dts | 28 ++++++++++++++++++++++++++++ 1 files changed, 28 insertions(+), 0 deletions(-)arch/arm/boot/dts/omap3-evm.dts +28
-0@@ -18,3 +18,31 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; }; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl at 48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +/include/ "twl4030.dtsi" + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <400000>; + + /* + * TVP5146 Video decoder-in for analog input support. + */ + tvp5146 at 5C { + compatible = "ti,tvp5146m2"; + reg = <0x5C>; + }; +};Signature · 1 line
1.7.0.4
Benoit,
Can this (and also AM3517 DT support patch) be merged to your next pull request?
Thanks,
Vaibhav
PATCH 1/1 arm/dts: omap3-evm: Add i2c and twl4030 support
Hi Vaibhav,
Quoted 39 lines · Vaibhav
Quoted 38 lines · Vaibhav
Add support for TWL4030, which is interfaced on i2c1 bus. Also add clock frequencies for other i2c
instances(2& 3)required for client-device exist on OMAP3EVM board.Signed-off-by Vaibhav Hiremath<[email protected]>Cc Benoit Cousson<[email protected]>Cc Grant Likely<[email protected]>Cc Tony Lindgren<[email protected]>--- arch/arm/boot/dts/omap3-evm.dts | 28 ++++++++++++++++++++++++++++ 1 files changed, 28 insertions(+), 0 deletions(-)arch/arm/boot/dts/omap3-evm.dts +18
-0@@ -18,3 +18,31 @@ reg =<0x80000000 0x10000000>; /* 256 MB */ }; }; + +&i2c1 { + clock-frequency =<2600000>; + + twl: twl at 48 { + reg =<0x48>; + interrupts =<7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent =<&intc>; + }; +}; + +/include/ "twl4030.dtsi" + +&i2c2 { + clock-frequency =<400000>; +}; + +&i2c3 {
Quoted 8 lines
arch/arm/boot/dts/omap3-evm.dts
Quoted 8 lines
arch/arm/boot/dts/omap3-evm.dts +8
-0+ clock-frequency =<400000>; + + /* + * TVP5146 Video decoder-in for analog input support. + */ + tvp5146 at 5C { + compatible = "ti,tvp5146m2"; + reg =<0x5C>;
Minor nit: Use lower case for hexa value.
Quoted 11 lines
Quoted 6 lines
arch/arm/boot/dts/omap3-evm.dts +2
-1+ }; +}; --1.7.0.4
Benoit,
Can this (and also AM3517 DT support patch) be merged to your next pull request?
Yes, assuming that Grant/Rob will ack it, I can take it.
Regards,
Benoit