emgd-1.10: new recipe
cover emgd-1.10: new recipe
From: Tom Zanussi <[email protected]>
This patchset adds support for emgd-1.10. This version relies on a new licensing mechanism called LICENSE_FLAGS.
The LICENSE_FLAGS implementation provides the mechanism needed for this new emgd recipe to be automatically downloaded from the emgd site and used by the recipe rather than using the manual-copy method required by the emgd-1.8 and previous recipes.
In order to allow emgd-1.10 to be built, however, the emgd license string, "license_emgd-driver-bin_1.10" must be added to the LICENSE_FLAGS_WHITELIST variable in local.conf e.g.:
LICENSE_FLAGS_WHITELIST = "license_emgd-driver-bin_1.10"
This patchset also removes the 1.8 recipe in the process.
The following changes since commit 4f1ca13b5a39f27bd41c0c7d9f2b163c3f9e8718:
Joshua Lock (1):
n450-audio: drop this machine specific recipe in favour of alsa-state
are available in the git repository at:
git://git.yoctoproject.org/meta-intel.git tzanussi/emgd-1.10v1
http://git.yoctoproject.org/cgit/cgit.cgi/meta-intel/log/?h=tzanussi/emgd-1.10v1
Tom Zanussi (6):
meta-intel: new recipe for emgd 1.10 driver
meta-intel: remove emgd-1.8
meta-fri2: remove PREFERRED_VERSION for emgd-driver-bin
meta-crownbay: remove PREFERRED_VERSION for emgd-driver-bin
meta-crownbay: update README
meta-fri2: update README
.../xorg-xserver/emgd-driver-bin_1.10.bb | 89 ++++++++++++++++++ .../xorg-xserver/emgd-driver-bin_1.8.bb | 39 -------- meta-crownbay/README | 97 +++----------------- meta-crownbay/conf/machine/crownbay.conf | 1 - meta-fri2/README | 86 +++--------------- meta-fri2/conf/machine/fri2.conf | 1 - 6 files changed, 113 insertions(+), 200 deletions(-) delete mode 100644 common/recipes-graphics/xorg-xserver/emgd-driver-bin-1.8/.gitignore create mode 100644 common/recipes-graphics/xorg-xserver/emgd-driver-bin_1.10.bb delete mode 100644 common/recipes-graphics/xorg-xserver/emgd-driver-bin_1.8.bb
PATCH 1/6 meta-intel: new recipe for emgd 1.10 driver
From: Tom Zanussi <[email protected]>
This adds a new recipe for the emgd 1.10 driver.
Signed-off-by Tom Zanussi <[email protected]>
--- .../xorg-xserver/emgd-driver-bin_1.10.bb | 89 ++++++++++++++++++++ 1 files changed, 89 insertions(+), 0 deletions(-) create mode 100644 common/recipes-graphics/xorg-xserver/emgd-driver-bin_1.10.bb
common/recipes-graphics/xorg-xserver/emgd-driver-bin_1.10.bb new file +89 -0
@@ -0,0 +1,89 @@ +SUMMARY = "EMGD 1.10 xserver binaries" +DESCRIPTION = "EMGD 1.10 includes some userspace binaries that use non-free \ +licensing, which are now available via a non-click-through downloadable \ +tarball, and is what this recipe now uses. Since it is a non-free license, \ +this recipe is marked as 'License_emgd-driver-bin_1.10' and you need to add \ +to LICENSE_FLAGS_WHITELIST += \"License_emgd-driver-bin_1.10\" to your \ +local.conf in order to enable it in a build." +LICENSE = "Intel-binary-only" +LICENSE_FLAGS = "license_${PN}_${PV}" +PR = "r0" + +EMGD_LIC_DIR = "IEMGD_HEAD_Linux/License" +EMGD_RPM_DIR = "IEMGD_HEAD_Linux/MeeGo1.2" +EMGD_VIDEO_PLUGIN_DIR = "../common/video_plugin" + +LIC_FILES_CHKSUM = "file://${WORKDIR}/${EMGD_LIC_DIR}/License.txt;md5=b54f01caaf8483b3cb60c0c40f2bf22d" + +DEPENDS = "rpm-native xz-native" + +SRC_URI = "https://edc.intel.com/App_Shared/Downloads/LIN_EMGD_1_10_RC_2209.tgz" + +SRC_URI[md5sum] = "e4a38d9efa0b086ae21b68145c4db4e9" +SRC_URI[sha256sum] = "acea5f0f93a31553553428623c007d7ed0c604cf715fd87dfe075751da4be548" + +FILES_${PN} += "${libdir}/dri ${libdir}/gstreamer-0.10 ${libdir}/xorg/modules/drivers" +FILES_${PN}-dev += "${libdir}/dri ${libdir}/xorg/modules/drivers" +FILES_${PN}-dbg += "${libdir}/xorg/modules/drivers/.debug ${libdir}/dri/.debug" + +S = "${WORKDIR}/${EMGD_RPM_DIR}" + +do_install () { + # A gstreamer VA buffer library + rpm2cpio ${S}/${EMGD_VIDEO_PLUGIN_DIR}/gst-vabuffer*.rpm | cpio -id + + # MIX Common contains common classes, datatype, header files used by other MIX components + rpm2cpio ${S}/${EMGD_VIDEO_PLUGIN_DIR}/mixcommon*.rpm | cpio -id + + # MIX Video Bitstream Parser is an user library interface for various video format bitstream parsing + rpm2cpio ${S}/${EMGD_VIDEO_PLUGIN_DIR}/mixvbp*.rpm | cpio -id + + # MIX Video is an user library interface for various video codecs available on the platform. + rpm2cpio ${S}/${EMGD_VIDEO_PLUGIN_DIR}/mixvideo*.rpm | cpio -id + + install -d -m 0755 ${D}${libdir}/gstreamer-0.10 + install -m 0755 ${S}/usr/lib/* ${D}${libdir}/ + + # A gstreamer plugin that uses MIX Video for hardware accelerated video decoding and rendering. + rpm2cpio ${S}/${EMGD_VIDEO_PLUGIN_DIR}/gst-plugins-mixvideo*.rpm | cpio -id + + # A collection of gstreamer plugins that uses VA libraries for hardware accelerated video rendering and text overlay. + rpm2cpio ${S}/${EMGD_VIDEO_PLUGIN_DIR}/gst-plugins-va*.rpm | cpio -id + + install -m 0755 ${S}/usr/lib/gstreamer-0.10/* ${D}${libdir}/gstreamer-0.10/ + + # EMGD runtime graphics libraries + rpm2cpio ${S}/emgd-bin*.rpm | xz -d | cpio -id + + install -d -m 0755 ${D}${libdir}/dri + install -d -m 0755 ${D}${libdir}/xorg/modules/drivers + install -d -m 0755 ${D}${sysconfdir} + install -d -m 0755 ${D}${mandir}/man4 + install -m 0755 ${S}/usr/lib/*.so.* ${D}${libdir}/ + install -m 0755 ${S}/usr/lib/dri/* ${D}${libdir}/dri/ + install -m 0755 ${S}/usr/lib/xorg/modules/drivers/* ${D}${libdir}/xorg/modules/drivers/ + install -m 0755 ${S}/etc/* ${D}${sysconfdir}/ + install -m 0755 ${S}/usr/share/man/man4/* ${D}${mandir}/man4/ + + # Khronos development headers needed for EGL, OpenGL-ES, and OpenVG development + rpm2cpio ${S}/emgd-devel*.rpm | xz -d | cpio -id + + install -d -m 0755 ${D}${includedir}/EGL + install -m 0755 ${S}/usr/include/EGL/*.h ${D}${includedir}/EGL/ + install -d -m 0755 ${D}${includedir}/GLES + install -m 0755 ${S}/usr/include/GLES/*.h ${D}${includedir}/GLES/ + install -d -m 0755 ${D}${includedir}/GLES2 + install -m 0755 ${S}/usr/include/GLES2/*.h ${D}${includedir}/GLES2/ + install -d -m 0755 ${D}${includedir}/KHR + install -m 0755 ${S}/usr/include/KHR/*.h ${D}${includedir}/KHR/ + install -d -m 0755 ${D}${includedir}/VG + install -m 0755 ${S}/usr/include/VG/*.h ${D}${includedir}/VG/ + + ln -sf libEGL.so.1 ${D}${libdir}/libEGL.so + ln -sf libGLES_CM.so.1 ${D}${libdir}/libGLES_CM.so + ln -sf libGLESv2.so.2 ${D}${libdir}/libGLESv2.so + ln -sf libOpenVG.so.1 ${D}${libdir}/libOpenVG.so + ln -sf libOpenVGU.so.1 ${D}${libdir}/libOpenVGU.so +} + +LEAD_SONAME = "libEGL.so"
Signature · 1 line
1.7.0.4
PATCH 2/6 meta-intel: remove emgd-1.8
From: Tom Zanussi <[email protected]>
emgd-1.8 is now obsoleted by emgd-1.10, so remove support for it.
Signed-off-by Tom Zanussi <[email protected]>
--- .../xorg-xserver/emgd-driver-bin_1.8.bb | 39 -------------------- 1 files changed, 0 insertions(+), 39 deletions(-) delete mode 100644 common/recipes-graphics/xorg-xserver/emgd-driver-bin-1.8/.gitignore delete mode 100644 common/recipes-graphics/xorg-xserver/emgd-driver-bin_1.8.bb
common/recipes-graphics/xorg-xserver/emgd-driver-bin-1.8/.gitignore deleted +0 -0
common/recipes-graphics/xorg-xserver/emgd-driver-bin_1.8.bb deleted +0 -39
@@ -1,39 +0,0 @@ -SUMMARY = "EMGD 1.8 xserver binaries" -DESCRIPTION = "EMGD 1.8 includes some userspace binaries that use non-free \ -licensing. Intel Open Source Technology Center unfortunately has no power \ -to change that, but tries to make their use as painless as possible. Please \ -see the README in meta-crownbay/ for instructions on the (simple) manual \ -steps necessary to make the necessary binaries available to this recipe. \ -Please do that before building an image." -LICENSE = "Intel-binary-only" -PR = "r8" - -LIC_FILES_CHKSUM = "file://${WORKDIR}/License.txt;md5=b54f01caaf8483b3cb60c0c40f2bf22d" - -FILESPATH = "${FILE_DIRNAME}/emgd-driver-bin-1.8" - -SRC_URI = "file://lib \ - file://License.txt" - -FILES_${PN} += "${libdir}/dri ${libdir}/gstreamer-0.10 ${libdir}/xorg/modules/drivers" -FILES_${PN}-dev += "${libdir}/*.so" -FILES_${PN}-dbg += "${libdir}/xorg/modules/drivers/.debug ${libdir}/dri/.debug" - -S = "${WORKDIR}" - -do_install () { - install -d -m 0755 ${D}/${libdir}/dri - install -d -m 0755 ${D}/${libdir}/gstreamer-0.10 - install -d -m 0755 ${D}/${libdir}/xorg/modules/drivers - install -m 0755 ${S}/lib/*.so.* ${D}${libdir}/ - install -m 0755 ${S}/lib/dri/* ${D}${libdir}/dri/ - install -m 0755 ${S}/lib/gstreamer-0.10/* ${D}${libdir}/gstreamer-0.10/ - install -m 0755 ${S}/lib/xorg/modules/drivers/* ${D}${libdir}/xorg/modules/drivers/ - - ln -sf libEGL.so.1 ${D}${libdir}/libEGL.so - ln -sf libGLES_CM.so.1 ${D}${libdir}/libGLES_CM.so - ln -sf libGLESv2.so.2 ${D}${libdir}/libGLESv2.so - ln -sf libEMGDScopeServices.so.1.5.15.3226 ${D}${libdir}/libPVRScopeServices.so -} - -LEAD_SONAME = "libEGL.so"
Signature · 1 line
1.7.0.4
PATCH 3/6 meta-fri2: remove PREFERRED_VERSION for emgd-driver-bin
In reply to [email protected]From: Tom Zanussi <[email protected]>
fri2 specifies a preferred version of 1.8 for emgd, but there's really no reason to do that at this point - it should be able to use the new 1.10 version.
Signed-off-by Tom Zanussi <[email protected]>
--- meta-fri2/conf/machine/fri2.conf | 1 - 1 files changed, 0 insertions(+), 1 deletions(-)
meta-fri2/conf/machine/fri2.conf +0 -1
@@ -17,7 +17,6 @@ XSERVER ?= "${XSERVER_IA32_BASE} \ PREFERRED_VERSION_xserver-xorg ?= "1.9.3" PREFERRED_VERSION_mesa-dri ?= "7.11" -PREFERRED_VERSION_emgd-driver-bin ?= "1.8" SYSLINUX_OPTS = "serial 0 115200" SERIAL_CONSOLE = "115200 ttyS0"
Signature · 1 line
1.7.0.4
Re: [PATCH 3/6] meta-fri2: remove PREFERRED_VERSION for emgd-driver-bin
Quoted 7 lines · On 01/24/2012 04:00 PM, [email protected] wrote:
From: Tom Zanussi <[email protected]>
fri2 specifies a preferred version of 1.8 for emgd, but there's really no reason to do that at this point - it should be able to use the new 1.10 version.
Signed-off-by Tom Zanussi <[email protected]>
Acked-by Darren Hart <[email protected]>
Quoted 16 lines
--- meta-fri2/conf/machine/fri2.conf | 1 - 1 files changed, 0 insertions(+), 1 deletions(-)meta-fri2/conf/machine/fri2.conf +0
-1@@ -17,7 +17,6 @@ XSERVER ?= "${XSERVER_IA32_BASE} \ PREFERRED_VERSION_xserver-xorg ?= "1.9.3" PREFERRED_VERSION_mesa-dri ?= "7.11" -PREFERRED_VERSION_emgd-driver-bin ?= "1.8" SYSLINUX_OPTS = "serial 0 115200" SERIAL_CONSOLE = "115200 ttyS0"
Signature · 3 lines
Darren Hart Intel Open Source Technology Center Yocto Project - Linux Kernel
PATCH 4/6 meta-crownbay: remove PREFERRED_VERSION for emgd-driver-bin
In reply to [email protected]From: Tom Zanussi <[email protected]>
crownbay specifies a preferred version of 1.8 for emgd, but there's really no reason to do that at this point - it should be able to use the new 1.10 version.
Signed-off-by Tom Zanussi <[email protected]>
--- meta-crownbay/conf/machine/crownbay.conf | 1 - 1 files changed, 0 insertions(+), 1 deletions(-)
meta-crownbay/conf/machine/crownbay.conf +0 -1
@@ -14,7 +14,6 @@ XSERVER ?= "${XSERVER_IA32_BASE} \ PREFERRED_VERSION_xserver-xorg ?= "1.9.3" PREFERRED_VERSION_mesa-dri ?= "7.11" -PREFERRED_VERSION_emgd-driver-bin ?= "1.8" APPEND += "video=vesafb vga=0x318"
Signature · 1 line
1.7.0.4
PATCH 5/6 meta-crownbay: update README
In reply to [email protected]From: Tom Zanussi <[email protected]>
The new emgd-driver-bin_1.10 recipe no longer requires manually extracting and installing emgd binaries, so remove the section that deals with that.
It does require a new LICENSE_FLAGS_WHITELIST entry in local.conf, so add instructions detailing that.
Signed-off-by Tom Zanussi <[email protected]>
--- meta-crownbay/README | 97 ++++++------------------------------------------- 1 files changed, 12 insertions(+), 85 deletions(-)
meta-crownbay/README +12 -85
@@ -6,7 +6,7 @@ The Crown Bay platform consists of the Intel Atom Z6xx processor, plus the Intel EG20T Platform Controller Hub (Tunnel Creek + Topcliff). It also supports the E6xx embedded on-chip graphics via the Intel -Embedded Media and Graphics Driver (EMGD) 1.8 Driver. +Embedded Media and Graphics Driver (EMGD) 1.10 Driver. Dependencies
@@ -41,8 +41,7 @@ Table of Contents ================= I. Building the meta-crownbay BSP layer - II. Special notes for building the meta-crownbay BSP layer -III. Booting the images in /binary + II. Booting the images in /binary I. Building the meta-crownbay BSP layer
@@ -64,7 +63,7 @@ common metadata shared between BSPs) e.g.: The meta-crownbay layer contains support for two different machine configurations. These configurations are identical except for the fact that the one prefixed with 'crownbay' makes use of the -Intel-proprietary EMGD 1.8 graphics driver, while the one prefixed +Intel-proprietary EMGD 1.10 graphics driver, while the one prefixed with 'crownbay-noemgd' does not. If you want to enable the layer that supports EMGD graphics add the
@@ -72,6 +71,13 @@ following to the local.conf file: MACHINE ?= "crownbay" +The 'crownbay' machine includes the emgd-driver-bin package, which has +a proprietary license that must be whitelisted by adding the string +"license_emgd-driver-bin_1.10" to the LICENSE_FLAGS_WHITELIST variable +in your local.conf. For example: + + LICENSE_FLAGS_WHITELIST = "license_emgd-driver-bin_1.10" + If you want to enable the layer that does not support EMGD graphics add the following to the local.conf file:
@@ -97,87 +103,8 @@ equivalently check out the appropriate branch from the meta-intel repository at the same location. -II. Special notes for building the meta-crownbay BSP layer -========================================================== - -The meta-crownbay layer makes use of the proprietary Intel EMGD -userspace drivers when building the "crownbay" machine (but not when -building the "crownbay-noemgd" machine). If you got the BSP from the -'BSP Downloads' section of the Yocto website, the EMGD binaries needed -to perform the build will already be present in the BSP, located in -the meta-intel/common/recipes-graphics/xorg-xserver/emgd-driver-bin-1.8 -directory, and you can ignore the rest of this section. - -If you didn't get the BSP from the 'BSP Downloads' section of the -Yocto website, you can download a tarball containing an rpm that -contains the binaries and extract the binaries from that, and copy -them to the proper location in the meta-crownbay layer. - -The following subsection describes that process in detail. - - -Downloading and extracting the binaries using the EMGD Linux tarball --------------------------------------------------------------------- - -The first step of the process is to download the EMGD 1.8 Driver. -Here is the current link to the URL from which it can be downloaded: - -http://edc.intel.com/Software/Downloads/EMGD/ - -In the Download Now tab, select: - -Intel® architecture-based product: Linux Tar Ball -Operating System: MeeGo* 1.2 IVI Linux* (kernel 2.6.37, X.server 1.9, Mesa 7.9) - -That will give you a large .tgz file: - -Lin_EMGD_1_8_RC_2032.tgz - -Extract the files in the tar file, which will in turn give you a -directory named IEMGD_HEAD_Linux. - -The binaries are contained in an rpm file; you can extract the -binaries from the rpm file using rpm2cpio and cpio: - -$ cd IEMGD_HEAD_Linux/MeeGo1.2 -$ rpm2cpio emgd-bin-2032-1.6.i586.rpm > emgd-bin-2032-1.6.i586.cpio -$ mkdir extracted; cd extracted -$ cpio -idv < ../emgd-bin-2032-1.6.i586.cpio - -You can now copy the xorg-xserver binaries to the emgd-driver-bin-1.8 -directory in meta-intel/common: - -$ cp -a usr/lib meta-intel/common/recipes-graphics/xorg-xserver/emgd-driver-bin-1.8 - -You also need to copy the IEMGD License.txt file to the same directory: - -$ cp IEMGD_HEAD_Linux/License/License.txt meta-intel/common/recipes/xorg-xserver/emgd-driver-bin-1.8 - -Finally, you need to extract and copy the video plugins to the -emgd-driver-bin-1.8 directory in meta-intel/common: - -$ cd IEMGD_HEAD_Linux/common/video_plugin -$ rpm2cpio gst-plugins-mixvideo-0.10.30-1.i586.rpm > gst-plugins-mixvideo-0.10.30-1.i586.cpio -$ rpm2cpio gst-plugins-va-0.10.7MFLD-1.i586.rpm > gst-plugins-va-0.10.7MFLD-1.i586.cpio -$ rpm2cpio gst-vabuffer-0.10.5MFLD-1.i586.rpm > gst-vabuffer-0.10.5MFLD-1.i586.cpio -$ rpm2cpio mixcommon-0.1.9-1.i586.rpm > mixcommon-0.1.9-1.i586.cpio -$ rpm2cpio mixvbp-0.1.24-1.i586.rpm > mixvbp-0.1.24-1.i586.cpio -$ rpm2cpio mixvideo-0.1.31-1.i586.rpm > mixvideo-0.1.31-1.i586.cpio -$ mkdir extracted; cd extracted -$ cpio -idv < ../gst-plugins-mixvideo-0.10.30-1.i586.cpio -$ cpio -idv < ../gst-plugins-va-0.10.7MFLD-1.i586.cpio -$ cpio -idv < ../gst-vabuffer-0.10.5MFLD-1.i586.cpio -$ cpio -idv < ../mixcommon-0.1.9-1.i586.cpio -$ cpio -idv < ../mixvbp-0.1.24-1.i586.cpio -$ cpio -idv < ../mixvideo-0.1.31-1.i586.cpio -$ rm usr/lib/*.so.0 -$ cp -a usr/lib meta-intel/common/recipes-graphics/xorg-xserver/emgd-driver-bin-1.8 - -At this point, you should be able to build meta-crownbay images as usual. - - -III. Booting the images in /binary -================================== +II. Booting the images in /binary +================================= This BSP contains bootable live images, which can be used to directly boot Yocto off of a USB flash drive.
Signature · 1 line
1.7.0.4
PATCH 6/6 meta-fri2: update README
In reply to [email protected]From: Tom Zanussi <[email protected]>
The new emgd-driver-bin_1.10 recipe no longer requires manually extracting and installing emgd binaries, so remove the section that deals with that.
It does require a new LICENSE_FLAGS_WHITELIST entry in local.conf, so add instructions detailing that.
Signed-off-by Tom Zanussi <[email protected]>
--- meta-fri2/README | 86 +++++++---------------------------------------------- 1 files changed, 12 insertions(+), 74 deletions(-)
meta-fri2/README +12 -74
@@ -8,7 +8,7 @@ processor, plus the Intel EG20T Platform Controller Hub (Tunnel Creek and various other machine-to-machine (m2m) capabilities. It also supports the E6xx embedded on-chip graphics via the Intel -Embedded Media and Graphics Driver (EMGD) 1.8 Driver. +Embedded Media and Graphics Driver (EMGD) 1.10 Driver. Dependencies
@@ -43,8 +43,7 @@ Table of Contents ================= I. Building the meta-fri2 BSP layer - II. Special notes for building the meta-fri2 BSP layer -III. Booting the images in /binary + II. Booting the images in /binary I. Building the meta-fri2 BSP layer
@@ -66,7 +65,7 @@ between BSPs) e.g.: The meta-fri2 layer contains support for two different machine configurations. These configurations are identical except for the fact that the one prefixed with 'fri2' makes use of the Intel-proprietary -EMGD 1.8 graphics driver, while the one prefixed with 'fri2-noemgd' +EMGD 1.10 graphics driver, while the one prefixed with 'fri2-noemgd' does not. If you want to enable the layer that supports EMGD graphics add the
@@ -74,6 +73,13 @@ following to the local.conf file: MACHINE ?= "fri2" +The 'fri2' machine includes the emgd-driver-bin package, which has a +proprietary license that must be whitelisted by adding the string +"license_emgd-driver-bin_1.10" to the LICENSE_FLAGS_WHITELIST variable +in your local.conf. For example: + + LICENSE_FLAGS_WHITELIST = "license_emgd-driver-bin_1.10" + If you want to enable the layer that does not support EMGD graphics add the following to the local.conf file:
@@ -99,76 +105,8 @@ equivalently check out the appropriate branch from the meta-intel repository at the same location. -II. Special notes for building the meta-fri2 BSP layer -====================================================== - -The meta-fri2 layer makes use of the proprietary Intel EMGD userspace -drivers when building the "fri2" machine (but not when building the -"fri2-noemgd" machine). If you got the BSP from the 'BSP Downloads' -section of the Yocto website, the EMGD binaries needed to perform the -build will already be present in the BSP, located in the -meta-intel/common/recipes-graphics/xorg-xserver/emgd-driver-bin-1.8 -directory, and you can ignore the rest of this section. - -If you didn't get the BSP from the 'BSP Downloads' section of the -Yocto website, you can download a tarball containing an rpm that -contains the binaries and extract the binaries from that, and copy -them to the proper location in the meta-fri2 layer. - -The following subsection describes that process in detail. - - -Downloading and extracting the binaries using the EMGD Linux tarball --------------------------------------------------------------------- - -The first step of the process is to download the EMGD 1.8 Driver. -Here is the current link to the URL from which it can be downloaded: - -http://edc.intel.com/Software/Downloads/EMGD/ - -In the Download Now tab, select: - -Intel® architecture-based product: Linux Tar Ball -Operating System: MeeGo* 1.2 IVI Linux* (kernel 2.6.37, X.server 1.9, Mesa 7.9) - -That will give you a large .tgz file: - -Lin_EMGD_1_8_RC_2032.tgz - -Extract the files in the tar file, which will in turn give you a -directory named IEMGD_HEAD_Linux. - -The binaries are contained in an rpm file; you can extract the -binaries from the rpm file using rpm2cpio and cpio: - -$ cd IEMGD_HEAD_Linux/MeeGo1.2 -$ rpm2cpio emgd-bin-2032-1.6.i586.rpm > emgd-bin-2032-1.6.i586.cpio -$ mkdir extracted; cd extracted -$ cpio -idv < ../emgd-bin-2032-1.6.i586.cpio - -Finally, you can copy the xorg-xserver binaries to the -emgd-driver-bin-1.8 directory in meta-intel/common: - -$ cp -a usr/lib meta-intel/common/recipes-graphics/xorg-xserver/emgd-driver-bin-1.8 - -You also need to copy the IEMGD License.txt file to the same directory: - -$ cp IEMGD_HEAD_Linux/License/License.txt meta-intel/common/recipes/xorg-xserver/emgd-driver-bin-1.8 - -Additionally, you should remove the following unused file from the -emgd binaries in order to avoid a packaging error at build-time: - -$ rm meta-intel/common/recipes-graphics/xorg-xserver/emgd-driver-bin-1.8/lib/dri/emgd_drv_video.so - -Finally, you need to remove the following file: - -$ rm meta-intel/common/recipes-graphics/xorg-xserver/emgd-driver-bin-1.8/lib/dri/emgd_drv_video.so - -At this point, you should be able to build meta-fri2 images as usual. - - -III. Booting the images in /binary -================================== +II. Booting the images in /binary +================================= This BSP contains bootable live images, which can be used to directly boot Yocto off of a USB flash drive.
Signature · 1 line
1.7.0.4
Re: [PATCH 6/6] meta-fri2: update README
Quoted 10 lines · On 01/24/2012 04:00 PM, [email protected] wrote:
From: Tom Zanussi <[email protected]>
The new emgd-driver-bin_1.10 recipe no longer requires manually extracting and installing emgd binaries, so remove the section that deals with that.
It does require a new
LICENSE_FLAGS_WHITELISTentry in local.conf, so add instructions detailing that.Signed-off-by Tom Zanussi <[email protected]>
Acked-by Darren Hart <[email protected]>
Quoted 129 lines
--- meta-fri2/README | 86 +++++++---------------------------------------------- 1 files changed, 12 insertions(+), 74 deletions(-)meta-fri2/README +12
-74@@ -8,7 +8,7 @@ processor, plus the Intel EG20T Platform Controller Hub (Tunnel Creek and various other machine-to-machine (m2m) capabilities. It also supports the E6xx embedded on-chip graphics via the Intel -Embedded Media and Graphics Driver (EMGD) 1.8 Driver. +Embedded Media and Graphics Driver (EMGD) 1.10 Driver. Dependencies@@ -43,8 +43,7 @@ Table of Contents ================= I. Building the meta-fri2 BSP layer - II. Special notes for building the meta-fri2 BSP layer -III. Booting the images in /binary + II. Booting the images in /binary I. Building the meta-fri2 BSP layer@@ -66,7 +65,7 @@ between BSPs) e.g.: The meta-fri2 layer contains support for two different machine configurations. These configurations are identical except for the fact that the one prefixed with 'fri2' makes use of the Intel-proprietary -EMGD 1.8 graphics driver, while the one prefixed with 'fri2-noemgd' +EMGD 1.10 graphics driver, while the one prefixed with 'fri2-noemgd' does not. If you want to enable the layer that supports EMGD graphics add the@@ -74,6 +73,13 @@ following to the local.conf file: MACHINE ?= "fri2" +The 'fri2' machine includes the emgd-driver-bin package, which has a +proprietary license that must be whitelisted by adding the string +"license_emgd-driver-bin_1.10" to the LICENSE_FLAGS_WHITELIST variable +in your local.conf. For example: + + LICENSE_FLAGS_WHITELIST = "license_emgd-driver-bin_1.10" + If you want to enable the layer that does not support EMGD graphics add the following to the local.conf file:@@ -99,76 +105,8 @@ equivalently check out the appropriate branch from the meta-intel repository at the same location. -II. Special notes for building the meta-fri2 BSP layer -====================================================== - -The meta-fri2 layer makes use of the proprietary Intel EMGD userspace -drivers when building the "fri2" machine (but not when building the -"fri2-noemgd" machine). If you got the BSP from the 'BSP Downloads' -section of the Yocto website, the EMGD binaries needed to perform the -build will already be present in the BSP, located in the -meta-intel/common/recipes-graphics/xorg-xserver/emgd-driver-bin-1.8 -directory, and you can ignore the rest of this section. - -If you didn't get the BSP from the 'BSP Downloads' section of the -Yocto website, you can download a tarball containing an rpm that -contains the binaries and extract the binaries from that, and copy -them to the proper location in the meta-fri2 layer. - -The following subsection describes that process in detail. - - -Downloading and extracting the binaries using the EMGD Linux tarball --------------------------------------------------------------------- - -The first step of the process is to download the EMGD 1.8 Driver. -Here is the current link to the URL from which it can be downloaded: - -http://edc.intel.com/Software/Downloads/EMGD/ - -In the Download Now tab, select: - -Intel® architecture-based product: Linux Tar Ball -Operating System: MeeGo* 1.2 IVI Linux* (kernel 2.6.37, X.server 1.9, Mesa 7.9) - -That will give you a large .tgz file: - -Lin_EMGD_1_8_RC_2032.tgz - -Extract the files in the tar file, which will in turn give you a -directory named IEMGD_HEAD_Linux. - -The binaries are contained in an rpm file; you can extract the -binaries from the rpm file using rpm2cpio and cpio: - -$ cd IEMGD_HEAD_Linux/MeeGo1.2 -$ rpm2cpio emgd-bin-2032-1.6.i586.rpm > emgd-bin-2032-1.6.i586.cpio -$ mkdir extracted; cd extracted -$ cpio -idv < ../emgd-bin-2032-1.6.i586.cpio - -Finally, you can copy the xorg-xserver binaries to the -emgd-driver-bin-1.8 directory in meta-intel/common: - -$ cp -a usr/lib meta-intel/common/recipes-graphics/xorg-xserver/emgd-driver-bin-1.8 - -You also need to copy the IEMGD License.txt file to the same directory: - -$ cp IEMGD_HEAD_Linux/License/License.txt meta-intel/common/recipes/xorg-xserver/emgd-driver-bin-1.8 - -Additionally, you should remove the following unused file from the -emgd binaries in order to avoid a packaging error at build-time: - -$ rm meta-intel/common/recipes-graphics/xorg-xserver/emgd-driver-bin-1.8/lib/dri/emgd_drv_video.so - -Finally, you need to remove the following file: - -$ rm meta-intel/common/recipes-graphics/xorg-xserver/emgd-driver-bin-1.8/lib/dri/emgd_drv_video.so - -At this point, you should be able to build meta-fri2 images as usual. - - -III. Booting the images in /binary -================================== +II. Booting the images in /binary +================================= This BSP contains bootable live images, which can be used to directly boot Yocto off of a USB flash drive.
Signature · 3 lines
Darren Hart Intel Open Source Technology Center Yocto Project - Linux Kernel