ARM: bcmring: remove unused DMA map code
Subsystems (2)
PATCH 1/1 ARM: bcmring: remove unused DMA map code
Remove BCMRING DMA map code which is no longer used.
This also fixes a build error with dma.c introduced by 6a40b33270564d706396f1b514a988d3c.
--- arch/arm/mach-bcmring/dma.c | 812 ------------------------------ arch/arm/mach-bcmring/include/mach/dma.h | 196 ------- 2 files changed, 0 insertions(+), 1008 deletions(-)
arch/arm/mach-bcmring/dma.c +0 -812
@@ -33,17 +33,11 @@#include <mach/timer.h> -#include <linux/mm.h> #include <linux/pfn.h> #include <linux/atomic.h> #include <linux/sched.h> #include <mach/dma.h> -/* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */ -/* especially since dc4 doesn't use kmalloc'd memory. */ - -#define ALLOW_MAP_OF_KMALLOC_MEMORY 0 -/* ---- Public Variables ------------------------------------------------- */ /* ---- Private Constants and Types -------------------------------------- */
@@ -53,24 +47,12 @@#define CONTROLLER_FROM_HANDLE (handle) (((handle) >> 4) & 0x0f)#define CHANNEL_FROM_HANDLE (handle) ((handle) & 0x0f) -#define DMA_MAP_DEBUG 0 - -#if DMA_MAP_DEBUG -# define DMA_MAP_PRINT(fmt, args...) printk("%s: " fmt, __func__, ## args) -#else -# define DMA_MAP_PRINT(fmt, args...) -#endif /* ---- Private Variables ------------------------------------------------ */ static DMA_Global_t gDMA;static struct proc_dir_entry *gDmaDir; -static atomic_t gDmaStatMemTypeKmalloc =ATOMIC_INIT (0 ); -static atomic_t gDmaStatMemTypeVmalloc =ATOMIC_INIT (0 ); -static atomic_t gDmaStatMemTypeUser =ATOMIC_INIT (0 ); -static atomic_t gDmaStatMemTypeCoherent =ATOMIC_INIT (0 ); -#include "dma_device.c" /* ---- Private Function Prototypes -------------------------------------- */
@@ -79,34 +61,6 @@ static atomic_t gDmaStatMemTypeCoherent = ATOMIC_INIT(0);/****************************************************************************/ /** -* Displays information for /proc/dma/mem-type -*/ -/****************************************************************************/ - -static int dma_proc_read_mem_type (char *buf,char **start,off_t offset, -int count,int *eof,void *data) -{ -int len =0 ; - - len +=sprintf (buf + len,"dma_map_mem statistics\n" ); - len += -sprintf (buf + len,"coherent: %d\n" , -atomic_read (&gDmaStatMemTypeCoherent)); - len += -sprintf (buf + len,"kmalloc: %d\n" , -atomic_read (&gDmaStatMemTypeKmalloc)); - len += -sprintf (buf + len,"vmalloc: %d\n" , -atomic_read (&gDmaStatMemTypeVmalloc)); - len += -sprintf (buf + len,"user: %d\n" , -atomic_read (&gDmaStatMemTypeUser)); - -return len; -} - -/****************************************************************************/ -/** * Displays information for /proc/dma/channels */ /****************************************************************************/
@@ -846,8 +800,6 @@ int dma_init(void) dma_proc_read_channels, NULL);create_proc_read_entry ("devices" ,0 , gDmaDir, dma_proc_read_devices,NULL ); -create_proc_read_entry ("mem-type" ,0 , gDmaDir, - dma_proc_read_mem_type,NULL ); } out:
@@ -1565,767 +1517,3 @@ int dma_set_device_handler(DMA_Device_t dev, /* Device to set the callback for. }EXPORT_SYMBOL (dma_set_device_handler); - -/****************************************************************************/ -/** -* Initializes a memory mapping structure -*/ -/****************************************************************************/ - -int dma_init_mem_map (DMA_MemMap_t *memMap) -{ -memset (memMap,0 ,sizeof (*memMap)); - -sema_init (&memMap->lock,1 ); - -return 0 ; -} - -EXPORT_SYMBOL (dma_init_mem_map); - -/****************************************************************************/ -/** -* Releases any memory currently being held by a memory mapping structure. -*/ -/****************************************************************************/ - -int dma_term_mem_map (DMA_MemMap_t *memMap) -{ -down (&memMap->lock);/* Just being paranoid */ - -/* Free up any allocated memory */ - -up (&memMap->lock); -memset (memMap,0 ,sizeof (*memMap)); - -return 0 ; -} - -EXPORT_SYMBOL (dma_term_mem_map); - -/****************************************************************************/ -/** -* Looks at a memory address and categorizes it. -* -* @return One of the values from the DMA_MemType_t enumeration. -*/ -/****************************************************************************/ - -DMA_MemType_t dma_mem_type (void *addr) -{ -unsigned long addrVal = (unsigned long )addr; - -if (addrVal >=CONSISTENT_BASE ) { -/* NOTE: DMA virtual memory space starts at 0xFFxxxxxx */ - -/* dma_alloc_xxx pages are physically and virtually contiguous */ - -return DMA_MEM_TYPE_DMA ; - } - -/* Technically, we could add one more classification. Addresses between VMALLOC_END */ -/* and the beginning of the DMA virtual address could be considered to be I/O space. */ -/* Right now, nobody cares about this particular classification, so we ignore it. */ - -if (is_vmalloc_addr (addr)) { -/* Address comes from the vmalloc'd region. Pages are virtually */ -/* contiguous but NOT physically contiguous */ - -return DMA_MEM_TYPE_VMALLOC ; - } - -if (addrVal >=PAGE_OFFSET ) { -/* PAGE_OFFSET is typically 0xC0000000 */ - -/* kmalloc'd pages are physically contiguous */ - -return DMA_MEM_TYPE_KMALLOC ; - } - -return DMA_MEM_TYPE_USER ; -} - -EXPORT_SYMBOL (dma_mem_type); - -/****************************************************************************/ -/** -* Looks at a memory address and determines if we support DMA'ing to/from -* that type of memory. -* -* @return boolean - -* return value != 0 means dma supported -* return value == 0 means dma not supported -*/ -/****************************************************************************/ - -int dma_mem_supports_dma (void *addr) -{ -DMA_MemType_t memType =dma_mem_type (addr); - - return (memType == DMA_MEM_TYPE_DMA) -#if ALLOW_MAP_OF_KMALLOC_MEMORY - || (memType ==DMA_MEM_TYPE_KMALLOC ) -#endif - || (memType ==DMA_MEM_TYPE_USER ); -} - -EXPORT_SYMBOL (dma_mem_supports_dma); - -/****************************************************************************/ -/** -* Maps in a memory region such that it can be used for performing a DMA. -* -* @return -*/ -/****************************************************************************/ - -int dma_map_start (DMA_MemMap_t *memMap,/* Stores state information about the map */ -enum dma_data_direction dir/* Direction that the mapping will be going */ - ) { -int rc; - -down (&memMap->lock); - -DMA_MAP_PRINT ("memMap: %p\n" , memMap); - -if (memMap->inUse) { -printk (KERN_ERR "%s: memory map %p is already being used\n" , - __func__, memMap); - rc = -EBUSY ; - goto out; - } - - memMap->inUse =1 ; - memMap->dir = dir; - memMap->numRegionsUsed =0 ; - - rc =0 ; - -out: - -DMA_MAP_PRINT ("returning %d" , rc); - -up (&memMap->lock); - -return rc; -} - -EXPORT_SYMBOL (dma_map_start); - -/****************************************************************************/ -/** -* Adds a segment of memory to a memory map. Each segment is both -* physically and virtually contiguous. -* -* @return 0 on success, error code otherwise. -*/ -/****************************************************************************/ - -static int dma_map_add_segment (DMA_MemMap_t *memMap,/* Stores state information about the map */ -DMA_Region_t *region,/* Region that the segment belongs to */ -void *virtAddr,/* Virtual address of the segment being added */ -dma_addr_t physAddr,/* Physical address of the segment being added */ -size_t numBytes/* Number of bytes of the segment being added */ - ) { -DMA_Segment_t *segment; - -DMA_MAP_PRINT ("memMap:%p va:%p pa:0x%x #:%d\n" , memMap, virtAddr, - physAddr, numBytes); - -/* Sanity check */ - -if (((unsigned long )virtAddr < (unsigned long )region->virtAddr) - || (((unsigned long )virtAddr + numBytes)) > - ((unsigned long )region->virtAddr + region->numBytes)) { -printk (KERN_ERR -"%s: virtAddr %p is outside region @ %p len: %d\n" , - __func__, virtAddr, region->virtAddr, region->numBytes); -return -EINVAL ; - } - -if (region->numSegmentsUsed >0 ) { -/* Check to see if this segment is physically contiguous with the previous one */ - - segment = ®ion->segment[region->numSegmentsUsed -1 ]; - -if ((segment->physAddr + segment->numBytes) == physAddr) { -/* It is - just add on to the end */ - -DMA_MAP_PRINT ("appending %d bytes to last segment\n" , - numBytes); - - segment->numBytes += numBytes; - -return 0 ; - } - } - -/* Reallocate to hold more segments, if required. */ - -if (region->numSegmentsUsed >= region->numSegmentsAllocated) { -DMA_Segment_t *newSegment; -size_t oldSize = - region->numSegmentsAllocated *sizeof (*newSegment); -int newAlloc = region->numSegmentsAllocated +4 ; -size_t newSize = newAlloc *sizeof (*newSegment); - - newSegment =kmalloc (newSize,GFP_KERNEL ); -if (newSegment ==NULL ) { -return -ENOMEM ; - } -memcpy (newSegment, region->segment, oldSize); -memset (&((uint8_t *) newSegment)[oldSize],0 , - newSize - oldSize); -kfree (region->segment); - - region->numSegmentsAllocated = newAlloc; - region->segment = newSegment; - } - - segment = ®ion->segment[region->numSegmentsUsed]; - region->numSegmentsUsed++; - - segment->virtAddr = virtAddr; - segment->physAddr = physAddr; - segment->numBytes = numBytes; - -DMA_MAP_PRINT ("returning success\n" ); - -return 0 ; -} - -/****************************************************************************/ -/** -* Adds a region of memory to a memory map. Each region is virtually -* contiguous, but not necessarily physically contiguous. -* -* @return 0 on success, error code otherwise. -*/ -/****************************************************************************/ - -int dma_map_add_region (DMA_MemMap_t *memMap,/* Stores state information about the map */ -void *mem,/* Virtual address that we want to get a map of */ -size_t numBytes/* Number of bytes being mapped */ - ) { -unsigned long addr = (unsigned long )mem; -unsigned int offset; -int rc =0 ; -DMA_Region_t *region; -dma_addr_t physAddr; - -down (&memMap->lock); - -DMA_MAP_PRINT ("memMap:%p va:%p #:%d\n" , memMap, mem, numBytes); - -if (!memMap->inUse) { -printk (KERN_ERR "%s: Make sure you call dma_map_start first\n" , - __func__); - rc = -EINVAL ; - goto out; - } - -/* Reallocate to hold more regions. */ - -if (memMap->numRegionsUsed >= memMap->numRegionsAllocated) { -DMA_Region_t *newRegion; -size_t oldSize = - memMap->numRegionsAllocated *sizeof (*newRegion); -int newAlloc = memMap->numRegionsAllocated +4 ; -size_t newSize = newAlloc *sizeof (*newRegion); - - newRegion =kmalloc (newSize,GFP_KERNEL ); -if (newRegion ==NULL ) { - rc = -ENOMEM ; - goto out; - } -memcpy (newRegion, memMap->region, oldSize); -memset (&((uint8_t *) newRegion)[oldSize],0 , newSize - oldSize); - -kfree (memMap->region); - - memMap->numRegionsAllocated = newAlloc; - memMap->region = newRegion; - } - - region = &memMap->region[memMap->numRegionsUsed]; - memMap->numRegionsUsed++; - - offset = addr & ~PAGE_MASK ; - - region->memType =dma_mem_type (mem); - region->virtAddr = mem; - region->numBytes = numBytes; - region->numSegmentsUsed =0 ; - region->numLockedPages =0 ; - region->lockedPages =NULL ; - -switch (region->memType) { -case DMA_MEM_TYPE_VMALLOC : - { -atomic_inc (&gDmaStatMemTypeVmalloc); - -/* printk(KERN_ERR "%s: vmalloc'd pages are not supported\n", __func__); */ - -/* vmalloc'd pages are not physically contiguous */ - - rc = -EINVAL ; -break ; - } - -case DMA_MEM_TYPE_KMALLOC : - { -atomic_inc (&gDmaStatMemTypeKmalloc); - -/* kmalloc'd pages are physically contiguous, so they'll have exactly */ -/* one segment */ - -#if ALLOW_MAP_OF_KMALLOC_MEMORY - physAddr = -dma_map_single (NULL , mem, numBytes, memMap->dir); - rc =dma_map_add_segment (memMap, region, mem, physAddr, - numBytes); -#else - rc = -EINVAL ; -#endif -break ; - } - -case DMA_MEM_TYPE_DMA : - { -/* dma_alloc_xxx pages are physically contiguous */ - -atomic_inc (&gDmaStatMemTypeCoherent); - - physAddr = (vmalloc_to_pfn (mem) <<PAGE_SHIFT ) + offset; - -dma_sync_single_for_cpu (NULL , physAddr, numBytes, - memMap->dir); - rc =dma_map_add_segment (memMap, region, mem, physAddr, - numBytes); -break ; - } - -case DMA_MEM_TYPE_USER : - { -size_t firstPageOffset; -size_t firstPageSize; -struct page **pages; -struct task_struct *userTask; - -atomic_inc (&gDmaStatMemTypeUser); - -#if 1 -/* If the pages are user pages, then the dma_mem_map_set_user_task function */ -/* must have been previously called. */ - -if (memMap->userTask ==NULL ) { -printk (KERN_ERR -"%s: must call dma_mem_map_set_user_task when using user-mode memory\n" , - __func__); -return -EINVAL ; - } - -/* User pages need to be locked. */ - - firstPageOffset = - (unsigned long )region->virtAddr & (PAGE_SIZE -1 ); - firstPageSize =PAGE_SIZE - firstPageOffset; - - region->numLockedPages = (firstPageOffset - + region->numBytes + -PAGE_SIZE -1 ) /PAGE_SIZE ; - pages = -kmalloc (region->numLockedPages * -sizeof (struct page *),GFP_KERNEL ); - -if (pages ==NULL ) { - region->numLockedPages =0 ; -return -ENOMEM ; - } - - userTask = memMap->userTask; - -down_read (&userTask->mm->mmap_sem); - rc =get_user_pages (userTask,/* task */ - userTask->mm,/* mm */ - (unsigned long )region->virtAddr,/* start */ - region->numLockedPages,/* len */ - memMap->dir ==DMA_FROM_DEVICE ,/* write */ -0 ,/* force */ - pages,/* pages (array of pointers to page) */ -NULL );/* vmas */ -up_read (&userTask->mm->mmap_sem); - -if (rc != region->numLockedPages) { -kfree (pages); - region->numLockedPages =0 ; - -if (rc >=0 ) { - rc = -EINVAL ; - } - }else { -uint8_t *virtAddr = region->virtAddr; -size_t bytesRemaining; -int pageIdx; - - rc =0 ;/* Since get_user_pages returns +ve number */ - - region->lockedPages = pages; - -/* We've locked the user pages. Now we need to walk them and figure */ -/* out the physical addresses. */ - -/* The first page may be partial */ - -dma_map_add_segment (memMap, - region, - virtAddr, -PFN_PHYS (page_to_pfn - (pages[0 ])) + - firstPageOffset, - firstPageSize); - - virtAddr += firstPageSize; - bytesRemaining = - region->numBytes - firstPageSize; - -for (pageIdx =1 ; - pageIdx < region->numLockedPages; - pageIdx++) { -size_t bytesThisPage = - (bytesRemaining > -PAGE_SIZE ?PAGE_SIZE : - bytesRemaining); - -DMA_MAP_PRINT - ("pageIdx:%d pages[pageIdx]=%p pfn=%u phys=%u\n" , - pageIdx, pages[pageIdx], -page_to_pfn (pages[pageIdx]), -PFN_PHYS (page_to_pfn - (pages[pageIdx]))); - -dma_map_add_segment (memMap, - region, - virtAddr, -PFN_PHYS (page_to_pfn - (pages - [pageIdx])), - bytesThisPage); - - virtAddr += bytesThisPage; - bytesRemaining -= bytesThisPage; - } - } -#else -printk (KERN_ERR -"%s: User mode pages are not yet supported\n" , - __func__); - -/* user pages are not physically contiguous */ - - rc = -EINVAL ; -#endif -break ; - } - -default : - { -printk (KERN_ERR "%s: Unsupported memory type: %d\n" , - __func__, region->memType); - - rc = -EINVAL ; -break ; - } - } - -if (rc !=0 ) { - memMap->numRegionsUsed--; - } - -out: - -DMA_MAP_PRINT ("returning %d\n" , rc); - -up (&memMap->lock); - -return rc; -} - -EXPORT_SYMBOL (dma_map_add_segment); - -/****************************************************************************/ -/** -* Maps in a memory region such that it can be used for performing a DMA. -* -* @return 0 on success, error code otherwise. -*/ -/****************************************************************************/ - -int dma_map_mem (DMA_MemMap_t *memMap,/* Stores state information about the map */ -void *mem,/* Virtual address that we want to get a map of */ -size_t numBytes,/* Number of bytes being mapped */ -enum dma_data_direction dir/* Direction that the mapping will be going */ - ) { -int rc; - - rc =dma_map_start (memMap, dir); -if (rc ==0 ) { - rc =dma_map_add_region (memMap, mem, numBytes); -if (rc <0 ) { -/* Since the add fails, this function will fail, and the caller won't */ -/* call unmap, so we need to do it here. */ - -dma_unmap (memMap,0 ); - } - } - -return rc; -} - -EXPORT_SYMBOL (dma_map_mem); - -/****************************************************************************/ -/** -* Setup a descriptor ring for a given memory map. -* -* It is assumed that the descriptor ring has already been initialized, and -* this routine will only reallocate a new descriptor ring if the existing -* one is too small. -* -* @return 0 on success, error code otherwise. -*/ -/****************************************************************************/ - -int dma_map_create_descriptor_ring (DMA_Device_t dev,/* DMA device (where the ring is stored) */ -DMA_MemMap_t *memMap,/* Memory map that will be used */ -dma_addr_t devPhysAddr/* Physical address of device */ - ) { -int rc; -int numDescriptors; -DMA_DeviceAttribute_t *devAttr; -DMA_Region_t *region; -DMA_Segment_t *segment; -dma_addr_t srcPhysAddr; -dma_addr_t dstPhysAddr; -int regionIdx; -int segmentIdx; - - devAttr = &DMA_gDeviceAttribute[dev]; - -down (&memMap->lock); - -/* Figure out how many descriptors we need */ - - numDescriptors =0 ; -for (regionIdx =0 ; regionIdx < memMap->numRegionsUsed; regionIdx++) { - region = &memMap->region[regionIdx]; - -for (segmentIdx =0 ; segmentIdx < region->numSegmentsUsed; - segmentIdx++) { - segment = ®ion->segment[segmentIdx]; - -if (memMap->dir ==DMA_TO_DEVICE ) { - srcPhysAddr = segment->physAddr; - dstPhysAddr = devPhysAddr; - }else { - srcPhysAddr = devPhysAddr; - dstPhysAddr = segment->physAddr; - } - - rc = -dma_calculate_descriptor_count (dev, srcPhysAddr, - dstPhysAddr, - segment-> - numBytes); -if (rc <0 ) { -printk (KERN_ERR -"%s: dma_calculate_descriptor_count failed: %d\n" , - __func__, rc); - goto out; - } - numDescriptors += rc; - } - } - -/* Adjust the size of the ring, if it isn't big enough */ - -if (numDescriptors > devAttr->ring.descriptorsAllocated) { -dma_free_descriptor_ring (&devAttr->ring); - rc = -dma_alloc_descriptor_ring (&devAttr->ring, - numDescriptors); -if (rc <0 ) { -printk (KERN_ERR -"%s: dma_alloc_descriptor_ring failed: %d\n" , - __func__, rc); - goto out; - } - }else { - rc = -dma_init_descriptor_ring (&devAttr->ring, - numDescriptors); -if (rc <0 ) { -printk (KERN_ERR -"%s: dma_init_descriptor_ring failed: %d\n" , - __func__, rc); - goto out; - } - } - -/* Populate the descriptors */ - -for (regionIdx =0 ; regionIdx < memMap->numRegionsUsed; regionIdx++) { - region = &memMap->region[regionIdx]; - -for (segmentIdx =0 ; segmentIdx < region->numSegmentsUsed; - segmentIdx++) { - segment = ®ion->segment[segmentIdx]; - -if (memMap->dir ==DMA_TO_DEVICE ) { - srcPhysAddr = segment->physAddr; - dstPhysAddr = devPhysAddr; - }else { - srcPhysAddr = devPhysAddr; - dstPhysAddr = segment->physAddr; - } - - rc = -dma_add_descriptors (&devAttr->ring, dev, - srcPhysAddr, dstPhysAddr, - segment->numBytes); -if (rc <0 ) { -printk (KERN_ERR -"%s: dma_add_descriptors failed: %d\n" , - __func__, rc); - goto out; - } - } - } - - rc =0 ; - -out: - -up (&memMap->lock); -return rc; -} - -EXPORT_SYMBOL (dma_map_create_descriptor_ring); - -/****************************************************************************/ -/** -* Maps in a memory region such that it can be used for performing a DMA. -* -* @return -*/ -/****************************************************************************/ - -int dma_unmap (DMA_MemMap_t *memMap,/* Stores state information about the map */ -int dirtied/* non-zero if any of the pages were modified */ - ) { - -int rc =0 ; -int regionIdx; -int segmentIdx; -DMA_Region_t *region; -DMA_Segment_t *segment; - -down (&memMap->lock); - -for (regionIdx =0 ; regionIdx < memMap->numRegionsUsed; regionIdx++) { - region = &memMap->region[regionIdx]; - -for (segmentIdx =0 ; segmentIdx < region->numSegmentsUsed; - segmentIdx++) { - segment = ®ion->segment[segmentIdx]; - -switch (region->memType) { -case DMA_MEM_TYPE_VMALLOC : - { -printk (KERN_ERR -"%s: vmalloc'd pages are not yet supported\n" , - __func__); - rc = -EINVAL ; - goto out; - } - -case DMA_MEM_TYPE_KMALLOC : - { -#if ALLOW_MAP_OF_KMALLOC_MEMORY -dma_unmap_single (NULL , - segment->physAddr, - segment->numBytes, - memMap->dir); -#endif -break ; - } - -case DMA_MEM_TYPE_DMA : - { -dma_sync_single_for_cpu (NULL , - segment-> - physAddr, - segment-> - numBytes, - memMap->dir); -break ; - } - -case DMA_MEM_TYPE_USER : - { -/* Nothing to do here. */ - -break ; - } - -default : - { -printk (KERN_ERR -"%s: Unsupported memory type: %d\n" , - __func__, region->memType); - rc = -EINVAL ; - goto out; - } - } - - segment->virtAddr =NULL ; - segment->physAddr =0 ; - segment->numBytes =0 ; - } - -if (region->numLockedPages >0 ) { -int pageIdx; - -/* Some user pages were locked. We need to go and unlock them now. */ - -for (pageIdx =0 ; pageIdx < region->numLockedPages; - pageIdx++) { -struct page *page = - region->lockedPages[pageIdx]; - -if (memMap->dir ==DMA_FROM_DEVICE ) { -SetPageDirty (page); - } -page_cache_release (page); - } -kfree (region->lockedPages); - region->numLockedPages =0 ; - region->lockedPages =NULL ; - } - - region->memType =DMA_MEM_TYPE_NONE ; - region->virtAddr =NULL ; - region->numBytes =0 ; - region->numSegmentsUsed =0 ; - } - memMap->userTask =NULL ; - memMap->numRegionsUsed =0 ; - memMap->inUse =0 ; - -out: -up (&memMap->lock); - -return rc; -} - -EXPORT_SYMBOL (dma_unmap);
arch/arm/mach-bcmring/include/mach/dma.h +0 -196
217 lines not on this page · raw message
--
1.7.5.4
PATCH 1/1 ARM: bcmring: remove unused DMA map code
Hi,
Quoted 4 lines · JD (Jiandong) Zheng
Remove BCMRING DMA map code which is no longer used.
This also fixes a build error with
dma.cintroduced by6a40b33270564d706396f1b514a988d3c.
What is this patch based on? It doesn't apply on top of 3.3-rc1, nor v3.2, 3.1, 3.0 or current linux-next.
Also, that SHA doesn't exist in the mainline tree, nor in linux-next.
Please make sure that patches you submit as a maintainer apply cleanly on top of the tree you want them included in.
Thanks,
-Olof
PATCH 1/1 ARM: bcmring: remove unused DMA map code
Quoted 3 lines
What is this patch based on? It doesn't apply on top of 3.3-rc1, nor v3.2, 3.1, 3.0 or current linux-next.
It is against v3.3-rc1. I attached the patch file now in case the email system (outlook) messed up the format like line ending.
Quoted 1 line
Also, that SHA doesn't exist in the mainline tree, nor in linux-next.
Updated in attached patch file
Quoted 9 lines
Please make sure that patches you submit as a maintainer apply cleanly on top of the tree you want them included in.
Thanks,
-Olof
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: 0001-ARM-bcmring-remove-unused-DMA-map-code.patch
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120130/61eb2b1f/attachment-0001.ksh>
Olof Johansson
AppliedPATCH 1/1 ARM: bcmring: remove unused DMA map code
Quoted 5 lines · Jiandong Zheng
Quoted 3 lines
What is this patch based on? It doesn't apply on top of 3.3-rc1, nor v3.2, 3.1, 3.0 or current linux-next.
It is against v3.3-rc1. I attached the patch file now in case the email system (outlook) messed up the format like line ending.
Ok, that looks better.
Quoted 3 lines
Quoted 1 line
Also, that SHA doesn't exist in the mainline tree, nor in linux-next.
Updated in attached patch file
Thanks!
Applied to arm-soc fixes branch for -rc.
-Olof