Skip to contentSkip to conversation

i.mx: i.mx5: update imx_get_mac_from_fuse function

PATCH New Jason Liu 3 participants 4 messages Jan 31, 2012 – Feb 1, 2012 Arm (32-bit)

lore
Share & tools
lore

Jason Liu

author
#0 lore raw

PATCH 1/1 i.mx: i.mx5: update imx_get_mac_from_fuse function

FEC does not work on the i.mx51/53evk board, it will hangup

In:    serial
Out:   serial
Err:   serial

Net:

After bisect, it due to the following commit:
be252b6 net: imx: Add multi-FEC support for imx_get_mac_from_fuse has change the imx_get_mac_from_fuse fucntion prototype, but fail to update i.mx5, here it does it.

After apply this patch, u-boot works again on i.mx51/53 evk boards.

Signed-off-by Jason Liu <[email protected]>
Cc Stefano Babic <[email protected]>
---
 arch/arm/cpu/armv7/mx5/soc.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
arch/arm/cpu/armv7/mx5/soc.c +1 -1
index 1533dd8..3f5a4f7 100644
@@ -72,7 +72,7 @@ u32 get_cpu_rev(void)
 }
 
 #if defined(CONFIG_FEC_MXC)
-void imx_get_mac_from_fuse(unsigned char *mac)
+void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
 {
 	int i;
 	struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
Signature · 1 line
1.7.4.1
#1 lore raw

PATCH 1/1 i.mx: i.mx5: update imx_get_mac_from_fuse function

Quoted 11 lines · Jason Liu

FEC does not work on the i.mx51/53evk board, it will hangup

In:    serial
Out:   serial
Err:   serial

Net:

After bisect, it due to the following commit:
be252b6 net: imx: Add multi-FEC support for imx_get_mac_from_fuse has change the imx_get_mac_from_fuse fucntion prototype, but fail to update i.mx5, here it does it.

Quoted 4 lines

After apply this patch, u-boot works again on i.mx51/53 evk boards.

Signed-off-by Jason Liu <[email protected]>
Cc Stefano Babic <[email protected]>
Acked-by Fabio Estevam <[email protected]>
#2 lore raw

PATCH 1/1 i.mx: i.mx5: update imx_get_mac_from_fuse function

In reply to Jason Liu
Quoted 11 lines · Jason Liu

FEC does not work on the i.mx51/53evk board, it will hangup

In:    serial
Out:   serial
Err:   serial

Net:

After bisect, it due to the following commit:
be252b6 net: imx: Add multi-FEC support for imx_get_mac_from_fuse has change the imx_get_mac_from_fuse fucntion prototype, but fail to update i.mx5, here it does it.

Quoted 5 lines

After apply this patch, u-boot works again on i.mx51/53 evk boards.

Signed-off-by Jason Liu <[email protected]>
Cc Stefano Babic <[email protected]>

---

Acked-by Stefano Babic <[email protected]>

Thanks for fixing !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================
#3 lore raw

PATCH 1/1 i.mx: i.mx5: update imx_get_mac_from_fuse function

In reply to Jason Liu
Quoted 6 lines · Jason Liu

FEC does not work on the i.mx51/53evk board, it will hangup

In:    serial
Out:   serial
Err:   serial

Net:

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================