Skip to contentSkip to conversation

x86, mm: Probe memory block size for generic x86 64bit

PATCH In review Yinghai Lu 2 participants 3 messages Jan 30, 2012 – Feb 7, 2012

Subsystems (2)
lore
Share & tools
lore

Yinghai Lu

author
#0 lore raw

PATCH 1/1 x86, mm: Probe memory block size for generic x86 64bit

Usually if the system support memory remapping to get back memory for mmio range, we will have 128M ... 2G at the end.

Try to probe that size.

So we can get less entries in /sys/devices/system/memory/

-v2: don't probe it every time when /sys/../block_size_byte is showed...

---
 arch/x86/mm/init_64.c |   34 ++++++++++++++++++++++++++++++----
 1 file changed, 30 insertions(+), 4 deletions(-)
arch/x86/mm/init_64.c +30 -4
Index: linux-2.6/arch/x86/mm/init_64.c
===================================================================
@@ -890,17 +890,43 @@ const char *arch_vma_name(struct vm_area
 	return NULL;
 }
 
-#ifdef CONFIG_X86_UV
-unsigned long memory_block_size_bytes(void)
+static unsigned long probe_memory_block_size(void)
 {
+	/* start from 2g */
+	unsigned long bz = 1UL<<31;
+
+#ifdef CONFIG_X86_UV
 	if (is_uv_system()) {
 		printk(KERN_INFO "UV: memory block size 2GB\n");
 		return 2UL * 1024 * 1024 * 1024;
 	}
-	return MIN_MEMORY_BLOCK_SIZE;
-}
 #endif
 
+	/* less than 64g installed */
+	if ((max_pfn << PAGE_SHIFT) < (16UL << 32))
+		return MIN_MEMORY_BLOCK_SIZE;
+
+	/* get the tail size */
+	while (bz > MIN_MEMORY_BLOCK_SIZE) {
+		if (!((max_pfn << PAGE_SHIFT) & (bz - 1)))
+			break;
+		bz >>= 1;
+	}
+
+	printk(KERN_DEBUG "memory block size : %ldMB\n", bz >> 20);
+
+	return bz;
+}
+
+static unsigned long memory_block_size_probed;
+unsigned long memory_block_size_bytes(void)
+{
+	if (!memory_block_size_probed)
+		memory_block_size_probed = probe_memory_block_size();
+
+	return memory_block_size_probed;
+}
+
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
 /*
  * Initialise the sparsemem vmemmap using huge-pages at the PMD level.
#1 lore raw
Quoted 9 lines · Yinghai Lu

Usually if the system support memory remapping to get back memory for mmio range, we will have 128M ... 2G at the end.

Try to probe that size.

So we can get less entries in /sys/devices/system/memory/

-v2: don't probe it every time when /sys/../block_size_byte is showed...

Okay... what on Earth is the point of this?

This just screams "dangerous toxic heuristic that's likely to break unusual configurations", and reducing the number of entries in a /sys directory is hardly motivation for anything.

You need a much better description of what you're trying to accomplish and why that matters in the first place.

-hpa

author
#2 lore raw
Quoted 11 lines · H. Peter Anvin
Quoted 9 lines · Yinghai Lu

Usually if the system support memory remapping to get back memory for mmio range, we will have 128M ... 2G at the end.

Try to probe that size.

So we can get less entries in /sys/devices/system/memory/

-v2: don't probe it every time when /sys/../block_size_byte is showed...

Quoted 8 lines

Okay... what on Earth is the point of this?

This just screams "dangerous toxic heuristic that's likely to break unusual configurations", and reducing the number of entries in a /sys directory is hardly motivation for anything.

You need a much better description of what you're trying to accomplish and why that matters in the first place.

that is for memory hotplug support.

on one 2048g system, current x86_64 have 128M as section size, and one memory_block only include
one section.
So that directory will have 16400 entries.

recent change will try to use block id to find block pointer in /sys for any section, and reuse that block pointer.
even only one section per block. and that finding will take some time ... already have one patch that will skip the search in that case during booting up.

but other case, We may still have this finding problem.

So solution could be increase block size just like SGI UV system did. (harded code to 2g).

This patch is trying to probe the block size to make it match mmio remap size. for example, AMD system after rev E or Intel Nehalem later system will have memory range
[0, TOM), [4g, TOM2]. if the memory hole is 2g and total is 128g, TOM will be 2g, and TOM2 will be 130g.
We could use 2g as block size instead of default 128M.
That will reduce number of entries in /sys/devices/system/memory/

Yinghai