Skip to contentSkip to conversation

Adding sound to BeagleBone

DISCUSSION Peter Bolch 2 participants 2 messages Feb 12, 2012 – Feb 13, 2012

lore
Share & tools
lore
#0 lore raw

Hi,

what - beside making the hardware - has to be done in principle to add an external audio codec to BeagleBone board (OMAPAM3358 based, with I2S but without a codec on board)? To make things easy I will use a codec with available driver.

Regards

Peter

#1 lore raw

Hi,

Quoted 3 lines · Peter Bolch

what - beside making the hardware - has to be done in principle to add an external audio codec to BeagleBone board (OMAPAM3358 based, with I2S but without a codec on board)?

I'm not really familiar with BeagleBone, and AM3359, but:
You will need a driver for McASP (0 is routed to expansion). It looks like that the McASP IP is the same as in DaVinci. With luck you might be able to reuse the code for AM3359.
Apart from this you will need a machine driver.

Signature · 1 line
Péter