arm: omap: smps regulator support

index 7ffcd28..97678e5 100644
@@ -484,6 +484,35 @@ static void __init beagle_opp_init(void)
 		return;
 	}
 
+	if (omap3_beagle_version == OMAP3BEAGLE_BOARD_C4) {
+		struct device *mpu_dev, *iva_dev;
+
+		mpu_dev = omap_device_get_by_hwmod_name("mpu");
+		iva_dev = omap_device_get_by_hwmod_name("iva");
+
+		if (!mpu_dev || !iva_dev) {
+			pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n",
+				__func__, mpu_dev, iva_dev);
+			return;
+		}
+		/* Enable MPU 720MHz opp */
+		r = opp_enable(mpu_dev, 720000000);
+
+		/* Enable IVA 520MHz opp */
+		r |= opp_enable(iva_dev, 520000000);
+
+		if (r) {
+			pr_err("%s: failed to enable higher opp %d\n",
+				__func__, r);
+			/*
+			 * Cleanup - disable the higher freqs - we dont care
+			 * about the results
+			 */
+			opp_disable(mpu_dev, 720000000);
+			opp_disable(iva_dev, 520000000);
+		}
+	}
+
 	/* Custom OPP enabled for all xM versions */
 	if (cpu_is_omap3630()) {
 		struct device *mpu_dev, *iva_dev;

index d95f3f9..a0f5fe1 100644
@@ -98,6 +98,8 @@ static struct omap_opp_def __initdata omap34xx_opp_def_list[] = {
 	OPP_INITIALIZER("mpu", true, 550000000, OMAP3430_VDD_MPU_OPP4_UV),
 	/* MPU OPP5 */
 	OPP_INITIALIZER("mpu", true, 600000000, OMAP3430_VDD_MPU_OPP5_UV),
+	/* MPU OPP6 : omap3530 high speed grade only */
+	OPP_INITIALIZER("mpu", false, 720000000, OMAP3430_VDD_MPU_OPP5_UV),
 
 	/*
 	 * L3 OPP1 - 41.5 MHz is disabled because: The voltage for that OPP is

@@ -123,6 +125,8 @@ static struct omap_opp_def __initdata omap34xx_opp_def_list[] = {
 	OPP_INITIALIZER("iva", true, 400000000, OMAP3430_VDD_MPU_OPP4_UV),
 	/* DSP OPP5 */
 	OPP_INITIALIZER("iva", true, 430000000, OMAP3430_VDD_MPU_OPP5_UV),
+	/* DSP OPP6 : omap3530 high speed grade only */
+	OPP_INITIALIZER("iva", false, 520000000, OMAP3430_VDD_MPU_OPP5_UV),
 };
 
 static struct omap_opp_def __initdata omap36xx_opp_def_list[] = {

index a5ec7f8f..5d8eaf3 100644
@@ -46,6 +46,7 @@ static struct omap_vc_common omap3_vc_common = {
 };
 
 struct omap_vc_channel omap3_vc_mpu = {
+	.flags = OMAP_VC_CHANNEL_DEFAULT,
 	.common = &omap3_vc_common,
 	.smps_sa_reg	 = OMAP3_PRM_VC_SMPS_SA_OFFSET,
 	.smps_volra_reg	 = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET,

index 10b20c6..5f62e51 100644
@@ -126,6 +126,38 @@ static struct regulator_init_data omap3_vpll2_idata = {
 	.consumer_supplies		= omap3_vpll2_supplies,
 };
 
+static struct regulator_consumer_supply omap3_vdd1_supply[] = {
+	REGULATOR_SUPPLY("vcc", "mpu.0"),
+};
+
+static struct regulator_consumer_supply omap3_vdd2_supply[] = {
+	REGULATOR_SUPPLY("vcc", "l3_main.0"),
+};
+
+static struct regulator_init_data omap3_vdd1 = {
+	.constraints = {
+		.name			= "VDD1",
+		.min_uV			= 600000,
+		.max_uV			= 1450000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies		= ARRAY_SIZE(omap3_vdd1_supply),
+	.consumer_supplies		= omap3_vdd1_supply,
+};
+
+static struct regulator_init_data omap3_vdd2 = {
+	.constraints = {
+		.name			= "VDD2",
+		.min_uV			= 600000,
+		.max_uV			= 1450000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies		= ARRAY_SIZE(omap3_vdd2_supply),
+	.consumer_supplies		= omap3_vdd2_supply,
+};
+
 void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
 				  u32 pdata_flags, u32 regulators_flags)
 {

@@ -133,6 +165,10 @@ void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
 		pmic_data->irq_base = TWL4030_IRQ_BASE;
 	if (!pmic_data->irq_end)
 		pmic_data->irq_end = TWL4030_IRQ_END;
+	if (!pmic_data->vdd1)
+		pmic_data->vdd1 = &omap3_vdd1;
+	if (!pmic_data->vdd2)
+		pmic_data->vdd2 = &omap3_vdd2;
 
 	/* Common platform data configurations */
 	if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb)

index e04e04d..fae5f76 100644
@@ -619,6 +619,8 @@ add_regulator_linked(int num, struct regulator_init_data *pdata,
 		unsigned num_consumers, unsigned long features)
 {
 	unsigned sub_chip_id;
+	struct twl_regulator_driver_data drv_data;
+
 	/* regulator framework demands init_data ... */
 	if (!pdata)
 		return NULL;

@@ -628,7 +630,19 @@ add_regulator_linked(int num, struct regulator_init_data *pdata,
 		pdata->num_consumer_supplies = num_consumers;
 	}
 
-	pdata->driver_data = (void *)features;
+	if (pdata->driver_data) {
+		/* If we have existing drv_data, just add the flags */
+		struct twl_regulator_driver_data *tmp;
+		tmp = pdata->driver_data;
+		tmp->features |= features;
+	} else {
+		/* add new driver data struct, used only during init */
+		drv_data.features = features;
+		drv_data.set_voltage = NULL;
+		drv_data.get_voltage = NULL;
+		drv_data.data = NULL;
+		pdata->driver_data = &drv_data;
+	}
 
 	/* NOTE:  we currently ignore regulator IRQs, e.g. for short circuits */
 	sub_chip_id = twl_map[TWL_MODULE_PM_MASTER].sid;

index 181a2cf..0afc9e1a 100644
@@ -58,6 +58,16 @@ struct twlreg_info {
 
 	/* chip specific features */
 	unsigned long 		features;
+
+	/*
+	 * optional override functions for voltage set/get
+	 * these are currently only used for SMPS regulators
+	 */
+	int			(*get_voltage)(void *data);
+	int			(*set_voltage)(void *data, int target_uV);
+
+	/* data passed from board for external get/set voltage */
+	void			*data;
 };
 
 

@@ -522,15 +532,25 @@ twl4030smps_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV,
 	struct twlreg_info *info = rdev_get_drvdata(rdev);
 	int vsel = DIV_ROUND_UP(min_uV - 600000, 12500);
 
-	twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE_SMPS_4030,
-		vsel);
+	if (info->set_voltage) {
+		return info->set_voltage(info->data, min_uV);
+	} else {
+		twlreg_write(info, TWL_MODULE_PM_RECEIVER,
+			VREG_VOLTAGE_SMPS_4030, vsel);
+	}
+
 	return 0;
 }
 
 static int twl4030smps_get_voltage(struct regulator_dev *rdev)
 {
 	struct twlreg_info *info = rdev_get_drvdata(rdev);
-	int vsel = twlreg_read(info, TWL_MODULE_PM_RECEIVER,
+	int vsel;
+
+	if (info->get_voltage)
+		return info->get_voltage(info->data);
+
+	vsel = twlreg_read(info, TWL_MODULE_PM_RECEIVER,
 		VREG_VOLTAGE_SMPS_4030);
 
 	return vsel * 12500 + 600000;

@@ -1052,6 +1072,7 @@ static int __devinit twlreg_probe(struct platform_device *pdev)
 	struct regulator_init_data	*initdata;
 	struct regulation_constraints	*c;
 	struct regulator_dev		*rdev;
+	struct twl_regulator_driver_data	*drvdata;
 
 	for (i = 0, info = NULL; i < ARRAY_SIZE(twl_regs); i++) {
 		if (twl_regs[i].desc.id != pdev->id)

@@ -1066,8 +1087,16 @@ static int __devinit twlreg_probe(struct platform_device *pdev)
 	if (!initdata)
 		return -EINVAL;
 
-	/* copy the features into regulator data */
-	info->features = (unsigned long)initdata->driver_data;
+	drvdata = initdata->driver_data;
+
+	if (!drvdata)
+		return -EINVAL;
+
+	/* copy the driver data into regulator data */
+	info->features = drvdata->features;
+	info->data = drvdata->data;
+	info->set_voltage = drvdata->set_voltage;
+	info->get_voltage = drvdata->get_voltage;
 
 	/* Constrain board-specific capabilities according to what
 	 * this driver and the chip itself can actually do.

index 78d3465..08a82d3 100644
@@ -749,6 +749,13 @@ struct twl4030_platform_data {
 	struct regulator_init_data		*vio6025;
 };
 
+struct twl_regulator_driver_data {
+	int		(*set_voltage)(void *data, int target_uV);
+	int		(*get_voltage)(void *data);
+	void		*data;
+	unsigned long	features;
+};
+
 /*----------------------------------------------------------------------*/
 
 int twl4030_sih_setup(int module);

index 5f62e51..0c453e7 100644
@@ -31,12 +31,25 @@
 
 #include "twl-common.h"
 #include "pm.h"
+#include "voltage.h"
 
 static struct i2c_board_info __initdata pmic_i2c_board_info = {
 	.addr		= 0x48,
 	.flags		= I2C_CLIENT_WAKE,
 };
 
+static int twl_set_voltage(void *data, int target_uV)
+{
+	struct voltagedomain *voltdm = (struct voltagedomain *)data;
+	return voltdm_scale(voltdm, target_uV);
+}
+
+static int twl_get_voltage(void *data)
+{
+	struct voltagedomain *voltdm = (struct voltagedomain *)data;
+	return voltdm_get_voltage(voltdm);
+}
+
 void __init omap_pmic_init(int bus, u32 clkrate,
 			   const char *pmic_type, int pmic_irq,
 			   struct twl4030_platform_data *pmic_data)

@@ -158,6 +171,16 @@ static struct regulator_init_data omap3_vdd2 = {
 	.consumer_supplies		= omap3_vdd2_supply,
 };
 
+static struct twl_regulator_driver_data omap3_vdd1_drvdata = {
+	.get_voltage = twl_get_voltage,
+	.set_voltage = twl_set_voltage,
+};
+
+static struct twl_regulator_driver_data omap3_vdd2_drvdata = {
+	.get_voltage = twl_get_voltage,
+	.set_voltage = twl_set_voltage,
+};
+
 void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
 				  u32 pdata_flags, u32 regulators_flags)
 {

@@ -165,10 +188,16 @@ void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
 		pmic_data->irq_base = TWL4030_IRQ_BASE;
 	if (!pmic_data->irq_end)
 		pmic_data->irq_end = TWL4030_IRQ_END;
-	if (!pmic_data->vdd1)
+	if (!pmic_data->vdd1) {
+		omap3_vdd1.driver_data = &omap3_vdd1_drvdata;
+		omap3_vdd1_drvdata.data = voltdm_lookup("mpu_iva");
 		pmic_data->vdd1 = &omap3_vdd1;
-	if (!pmic_data->vdd2)
+	}
+	if (!pmic_data->vdd2) {
+		omap3_vdd2.driver_data = &omap3_vdd2_drvdata;
+		omap3_vdd2_drvdata.data = voltdm_lookup("core");
 		pmic_data->vdd2 = &omap3_vdd2;
+	}
 
 	/* Common platform data configurations */
 	if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb)