Skip to contentSkip to conversation

rtl28xxu: add another Freecom usb id

PATCH In review Paolo Pantò 2 participants 2 messages Feb 21, 2012 Media (V4L/DVB)

lore
Share & tools
lore

Paolo Pantò

author
#0 lore raw

PATCH 1/1 rtl28xxu: add another Freecom usb id

Besides sticks with the usb id 14AA:0160, there exists also some with 14AA:0161 - this is the output in /var/log/messages:

usb 1-1: new high-speed USB device number 2 using ehci_hcd usb 1-1: New USB device found, idVendor=14aa, idProduct=0161 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1: Product: Freecom DVB-T
usb 1-1: Manufacturer: Freecom DVB-T
usb 1-1: SerialNumber: 00000000000036742

The patch is based on the code at
http://git.linuxtv.org/anttip/media_tree.git/shortlog/refs/heads/realtek

Signed-off-by Paolo Pantò <[email protected]>
---
 drivers/media/dvb/dvb-usb/dvb-usb-ids.h |    1 +
 drivers/media/dvb/dvb-usb/rtl28xxu.c    |    4 ++++
 2 files changed, 5 insertions(+), 0 deletions(-)
drivers/media/dvb/dvb-usb/dvb-usb-ids.h +1 -0
index 3d9a166..ba330ed 100644
@@ -128,6 +128,7 @@
 #define USB_PID_E3C_EC168_4				0x1001
 #define USB_PID_E3C_EC168_5				0x1002
 #define USB_PID_FREECOM_DVBT				0x0160
+#define USB_PID_FREECOM_DVBT_2				0x0161
 #define USB_PID_UNIWILL_STK7700P			0x6003
 #define USB_PID_GENIUS_TVGO_DVB_T03			0x4012
 #define USB_PID_GRANDTEC_DVBT_USB_COLD			0x0fa0
drivers/media/dvb/dvb-usb/rtl28xxu.c +4 -0
index 548e3ee..5124231 100644
@@ -767,6 +767,7 @@ err:
 enum rtl28xxu_usb_table_entry {
 	RTL2831U_0BDA_2831,
 	RTL2831U_14AA_0160,
+	RTL2831U_14AA_0161,
 };
 
 static struct usb_device_id rtl28xxu_table[] = {

@@ -775,6 +776,8 @@ static struct usb_device_id rtl28xxu_table[] = {
 		USB_DEVICE(USB_VID_REALTEK, USB_PID_REALTEK_RTL2831U)},
 	[RTL2831U_14AA_0160] = {
 		USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT)},
+	[RTL2831U_14AA_0161] = {
+		USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT_2)},
 
 	/* RTL2832U */
 	{} /* terminating entry */

@@ -840,6 +843,7 @@ static struct dvb_usb_device_properties rtl28xxu_properties[] = {
 				.name = "Freecom USB2.0 DVB-T",
 				.warm_ids = {
 					&rtl28xxu_table[RTL2831U_14AA_0160],
+					&rtl28xxu_table[RTL2831U_14AA_0161],
 				},
 			},
 		}

--

Acked-by on v1 1/1
#1 lore raw
Quoted 9 lines · Paolo Pantò

Besides sticks with the usb id 14AA:0160, there exists also some with 14AA:0161 - this is the output in /var/log/messages:

The patch is based on the code at
http://git.linuxtv.org/anttip/media_tree.git/shortlog/refs/heads/realtek

Signed-off-by Paolo Pantò<[email protected]>
Acked-by Antti Palosaari <[email protected]>

Mauro, add that patch top of my pending RTL2831U PULL request.

regards
Antti

Signature · 1 line
http://palosaari.fi/